• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.714-715
• /
• 2006

The Application of powder metallurgy (PM) aluminum structural parts is at its early growing stage, despite of some automotive applications. The market potential for PM aluminum, however, is large. Growth is expected from the market expansion of the existing applications and new applications, including the replacements of aluminum and zinc based castings and some ferrous PM automotive parts by PM aluminum. Compared to castings, PM is an efficient mass production technology. The PM aluminum is more competitive than die casting for some automotive applications. Besides weight saving leading to performance improvement, the total cost increase for aluminum PM parts is less than 15% compared to ferrous PM automotive parts. The future is promising for PM aluminum.

• International Journal of Automotive Technology
• /
• v.7 no.2
• /
• pp.195-199
• /
• 2006

According to the United States FMVSS 208, every passenger car on the market after September of 2006 must install a safety system, which can deploy the airbag with different intensity or suppression based on the passenger type, to reduce infant and child injuries from airbag deployments. The Weight Classification System, which has been developed by Hyundai Autonet, is a system that classifies the person occupying the passenger seat. To overcome sensing problems due to the weight sensors small voltage, the Distributed Systems Interface is adopted.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.4
• /
• pp.487-494
• /
• 2016

In order to comply with the Federal Motor Vehicle Safety Standard(FMVSS) No. 208 that has been in force since September 2003, an automatic airbag suppression system has become an essential option for detecting and protecting infants and children seated in the front passenger seat of vehicles in the U.S. market. MOBIS has developed the world's first weight-based OCS under the name NWCS. NWCS is composed of two sensors and ECU. It is sub-packaged in order to minimize the seat structure deviation. In this paper, technical features, robustness and performance of NWCS are summarized and discussed.

• Archives of Obesity and Metabolism
• /
• v.1 no.2
• /
• pp.59-65
• /
• 2022

Obesity is a serious health concern, which has been linked to an increased risk for cardiovascular diseases and some cancers. The traditional obesity control program is expensive. Moreover, it is difficult to maintain a healthy body weight as well as reduce body fat. The long-term use of effective and tolerable medication is carefully recommended to control body weight. In addition to obesity control medications, health functional foods, related to body weight control, have become popular in the commercial market. Known mechanisms include lipolysis, appetite control, inflammation reduction, and lean body mass maintenance. Previous clinical trials have documented the efficacy of some health functional foods; however, there are limitations. Studies on the potential roles and efficacy of some health functional foods, including caffeine, green tea, protein supplement, probiotics, and arginine, were reviewed. More large-scale and randomized placebo-controlled trials should be conducted eventually.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1176-1182
• /
• 2009

Due to recession in real estate market, interest of risk analysis is increasing. Feasibility study in the first stage takes a great role in a project. There are not objectified tools which are able to cope with uncertainty of project, and feasibility study based on selected method of determinism does not include liquidity of weight risk. Also, shortage of consideration for subjective and atypical external factors causes inappropriate results. Therefore, this study proposes feasibility study model focused on risk factor influences in construction cost and sales cost. Considering effective level of cost based on objective risk factors and probable weight of risk by this model, real workers are able to bring correct and scientific decisions better than former method based on selective analysis of real estate development.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.91-91
• /
• 2022

Popcorn grains are consumed around 10,000 tons per year, in South Korea. It is consumed in amusement parks, movie theaters and snacks. The size of the popcorn processed market in Korea is estimated to be 3.6 billon won per year. So, the popcorn grain market has good prospects. On the other hand, domestic grain is at the level of 1 %, which is less domestic production than the size of the market. Maize Research Institute has developed domestic varieties in order to increase the use of domestically produced grains. The Oyrunpopcorn variety which was commonly distributed is a preferred cultivar because it has a good popping rate compared to imported grains. In addition, 'G-Popcom', 'Oyrun #2' and 'Kichan Popcorn' were developed, which diversified the choice of the farmers. Yield per unit area is important to improve farmers' income. At present, domestic grain production is traded at 5,000 won/kg, so if the yield improves, a high farmer^ income is expected. Therefore, this study compared the growth characteristics and yield according to the appropriate sowing time and plant density to improve the yield of domestically grown popcorn. We used 'Oryunpopcorn', for this research. Agronomic characteristics were compared by sowing times April 23, May 22 and June 22. The 100 seeds weight were 15.9g, 17.7g and 15.0g, respectively. Kernel weight planted in May 22 is the highest value. Yield per 10a were 414kg, 434kg and 296kg, respectively. It shows the yield planted in May 22 was higher than other trials. Therefore, the sowing time to increase the kernel weight and yield is appropriate for planting in mid-May. The number of plants in planting density trial was 5,700 plants, 4,700 plants and 4,000 plants in 10a area. Plant height at each trial were 221 cm, 214cm and 218cm, respectively. It was the highest height in 5,700 plants trials. The 100 kernel weight were 14.8g, 15.9g and 16.5g, respectively. Low planting density trial indicated high kernel weight. Yield per 10a was 415kg, 357kg and 314kg, respectively. It was higher at high density trial than other experimental plots. Therefore, appropriate sowing time was in mid-May and planting density was 5,700 plants/10a in order to increase the yield of popcorn in South Korea. This study will be useful for farmer's income to use the domestic cultivars.

• Korean Journal of Human Ecology
• /
• v.10 no.3
• /
• pp.291-301
• /
• 2001

The purpose of this study is to provide the apparel manufacturers who have not been effectively preparing for worldwide trends of rapid increase in overweight population with fundamental data to develop updated domestic market through the findings derived from the actual dissatisfaction factors in purchasing of a garment by overweight body customers excluded in the apparel industry. The results of study are as follows : Considering the relationships with dissatisfaction factors in purchasing ready-to-wear according to the interests in weight control, there is a slight difference in the partial intention from degree of self-recognition of body figure and interests in weight control and motivation of interests in weight control. As a results, first, the more recognition of obesity, the more dissatisfaction with "product variety" and "purchasing decision". Second, the more interests in weight control, the more dissatisfaction with product variety in purchasing of ready-to-wear. Third, the more self-recognition of obesity as the motivation of interests in weight control, there is a high dissatisfaction with product variety.

• Korean Journal of Pharmacognosy
• /
• v.18 no.3
• /
• pp.196-201
• /
• 1987

A study was carried out to investigate the possibility of acclimation of Coptis japonica Makino in Korea. Coptis japonica could be grown within 4 years as a medicinal crude drug if it is cultivated in the area of mountain facing north(300m above sea level) with 70% light interception and appropriate soil texture. It is to be noted that the propagation of the plant is more important than the yield of berberine because the berberine contents do not change in different conditions. The results were as follows; 1. The germination rates of the seeds by covering with the pine tree leaves were the highest and averaged 63%. 2. The germination rates of dry seeds were not affected in spite of low temperature and $GA_3$ treatment. 3. The germination rates of the seeds stored in moistured sand were averaged 85%, but in dry state, they were not germinated. 4. The number of leaves and fresh weight of Coptis japonica from the area of mountain facing north were increased significantly. 5. The growth and fresh weight of Coptis japonica were reduced in clay. 6. The best growth was obtained under 70% light interception. It is possible to intercrop between evergreen trees. 7. The foliage dressing did not affect the growth. 8. The number of leaves and fresh weight were increased from the 3rd year, and the average weight of rhizomes was 5.7g in 4th year. 9. The berberine contents of the rhizomes of Coptis japonica under various treatment conditions ranged from 9 to 10%. Coptidis Rhizoma from this study and from Korean market showed much higher berberine contents than those from Japanese market.

• Journal of Animal Science and Technology
• /
• v.55 no.3
• /
• pp.195-202
• /
• 2013

The present study was undertaken to investigate the effects of increasing pig market weight on the incidence of the 'caky-fatty' belly, carcass grade and carcass quality traits. To this end, 500 (Yorkshire ${\times}$ Landrace) ${\times}$ Duroc market pigs consisting of equal numbers of barrows and gilts were slaughtered at body weights ranging from 85 to 150 kg and their carcasses were analyzed. Backfat thickness (BFT; mm) of the barrows and gilts regressed on live weight (kg) linearly as follows: BFT (y) = 0.1827x + 3.4825 ($r^2$ = 0.4671) and y = 0.2015x-0.6972 ($r^2$ = 0.4736), respectively. The caky-fatty belly, which, by definition of the present study, had = 55% fat by weight in the dorsal-side half of a 5 cm-wide belly strip between the $11^{th}$ and $12^{th}$ ribs, was found in 10 carcasses from barrows. However, no belly was condemned as 'caky-fatty' by the retailers. Total number of carcasses which were down-graded on account of overweight was as many as 101 (20.2%). The $1^+A$-grade carcasses exhibited a superior intramuscular fat score to all other grades, but except for this and the defective quality traits, no visible differences were found in carcass quality among different carcass grades. In conclusion, the current carcass grading system, which is sparingly reflective of the carcass quality and also under-evaluates the larger but otherwise normal carcasses, may as well be revised. Moreover, the incidence of the caky-fatty belly appears not to be a critical factor to be considered when increasing the pig market weight.

• The Journal of the Korea Contents Association
• /
• v.17 no.11
• /
• pp.588-599
• /
• 2017

This paper analyzes internet access model between ISP, CP and end users where CP uses various technologies to provide direct access to ISP owning subscribers to consume its own contents in low cost and high quality. The level of access charge depends on the competitiveness of CP market. When CP market is perfect competitive, the level of access charge is identical to that of social optimum while when CP market is monopoly, the level of access charge is influenced by the sensitivity of the contents price to access charge for CP. The dead weight loss due to monopoly market in CP can be removed by the regulation of access charge. Socially optimal access charge in monopoly market of CP is lower than that in competitive market. This is because the regulator wants to set access price to lower level to reduce welfare loss from monopoly in CP market where CP determines the price to over marginal cost.