• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.6 s.261
• /
• pp.635-643
• /
• 2007

As many engineers and technicians are involved in the design process of large scale and/or complex products, there are a lot of miss matches and interferences due to designers' faults and several kinds of CAD systems. Recently, CAD systems are applied to verify and check the assembly process. Digital Mock-Up(DMU) system, a tool to build a virtual mock-up in the design stage, has been used to prevent the interferences and miss matches during precision design processes. Using the virtual assembly tool, engineers are able to design precision and interference free parts without physical mock-ups. Instead of a single CAD source, several CAD systems are used to design a complex product. Several organizations are involved in the distributed design environment for heterogeneous multi-CAD assembly. XML and the lightweight CAD file are proposed for the multi-CAD assembly. XML data contains hierarchy of the heterogenenous multi-CAD assembly. STEP PDM schema and STEP ISO 10303-28 formations are applied to construct the XML data. The lightweight CAD file produced from various CAD files through ACIS kernel and InterOp not only contains mesn, B-Rep and topological data, but also is used to visualize CAD data and to verify dimensions. Developed system is executed on the desktop computers. It does not require commercial CAD systems to visualize 3D assembly data. Real-time interference and fitness checks, dimensional verification, and design and assembly verification are performed on the developed system. Assembly of heterogeneous models for a car is conducted to verify the effectiveness of the developed DMU system on the Internet.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.12
• /
• pp.66-76
• /
• 1998

In this paper, we implement a buffer capable of handling short loops references to statistically lower the miss rate of variable-length instructions stored in the instruction buffer. MAU(Mark Appending Unit) takes the instructions as they are fetched from external memory, performs some initial decode operations and stores the results of the decode in the buffer for reducing multiple decodes when instructions are executed repeatedly such as in a loop. It includes a decision block of whether hit or not for effectively processing branch instructions Each module of the proposed architecture of processing variable-length instruction is described in VHDL structurally and behaviorally and whether it is working well or not is checked on V-System simulator of Model Technology Inc. We synthesized and simulated the architecture using an ASIC Synthesizer tool with 0.6$\mu\textrm{m}$ 5-Volt CMOS COMPASS library. Operation speed is up to 140MHz. The architecture includes about 17,000 gates.

• The Korea Journal of Herbology
• /
• v.32 no.2
• /
• pp.1-16
• /
• 2017

Objective : The study was for researching the activation methods about Korean overall medical crops business from 2010 to 2016. In addition, it was to be given to examining complement points and improving methods to the changeable domestic market of medical crops caused by a considerable export-import amount of them. Methods : By examining and analyzing data for the trend of medical crops production and their export-import trend from 2010 to 2015, I found it valuable to use it as the basic resources for researching the urgent problem of medical crops' business and its improvement. Results : 1. As surveying the trend of the domestic medical crops over the recent six years, I found that the export amount of them has drastically decreased, while the import amount has increased. And so, the prices of the domestic medical crops and their production are unstable. 2. By developing standardized medical crops which a trading counterpart country could prefer, we have to promote the export competitiveness. 3. We should reinforce an origin mark and geographical mark practice for domestic herbal materials and expand GMP. 4. We should prepare a standardization of herbal medicines by setting up an independent governmental department. Conclusion : 1. The government should present an appropriate supply-demand amount of the medical crops depending on the domestic needs and the export-import transactions. 2. There should be an institutional supportive system which is able to guarantee stable incomes of farmers through contract cultivation. 3. We should develop high value standardized medical crops.

• Journal of Information Technology Applications and Management
• /
• v.19 no.2
• /
• pp.217-231
• /
• 2012

In the past, companies should make enormous facility investment and acquire a right to do business in order to join communication markets, but now they can do business without important facilities, such as communication networks. Such a movement to ease regulations about companies which want to newly join the communication industry is expected not only to change a competition frame of the mobile communication market but also to greatly affect the entire communication industry. Through this study aiming to look into a way to calculate a reasonable wholesale price related to the government's introduction of the Mobile Virtual Network Operator (MVNO) system, I came up with a following result. I applied the operating profit percentage and the ratio of operating gain to cost to the cost plus model and retail minus model, respectively, to calculate the wholesale price and found that when I calculated with the cost plus model applying the operating profit percentage, I could get the highest wholesale price. On the other hand, I got the lowest wholesale price with the retail minus model by applying the operating profit percentage. Division of expenses and calculation of profit percentage are important factors in calculating the wholesale price and such results are expected to help accurate calculation of the MVNO wholesale price.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.343-355
• /
• 2018

A wide-voltage-conversion range bidirectional DC-DC converter is proposed in this paper. The topology is comprised of one typical LC energy storage component and a special common grounded asymmetric H-bridge with four active power switches/anti-parallel diodes. The narrow output PWM voltage is generated from the voltage difference between two normal (wider) output PWM voltages from the asymmetric H-bridge with duty cycles close to 0.5. The equivalent switching frequency of the output PWM voltage is double the actual switching frequency, and a wide step-down/step-up ratio range is achieved. A 300W prototype has been constructed to validate the feasibility and effectiveness of the proposed bidirectional converter between the variable low voltage side (24V~48V) and the constant high voltage side (200V). The slave active power switches allow ZVS turn-on and turn-off without requiring any extra hardware. The maximum conversion efficiency is 94.7% in the step-down mode and 93.5% in the step-up mode. Therefore, the proposed bidirectional topology with a common ground is suitable for energy storage systems such as renewable power generation systems and electric vehicles with a hybrid energy source.

• Journal of Korean Academy of Nursing
• /
• v.42 no.7
• /
• pp.1019-1026
• /
• 2012

Purpose: To examine geographical imbalances by analyzing new graduate nurses' migration patterns among regions where they grew up, attended nursing school, and had their first employment and to identify factors related to working in non-metropolitan areas. Methods: The sample consisted of 507 new graduates working in hospitals as full-time registered nurses in South Korea. Migration patterns were categorized into 5 patterns based on sequential transitions of "geographic origin-nursing school-hospital." Multiple logistic regression analysis was conducted to identify factors associated with working in non-metropolitan hospitals. Results: Nurses who grew up, graduated, and worked in the same region accounted for the greatest proportion (54%). Sixty-five percent had their first employment in the region where they graduated. Nurses tended to move from poor to rich regions and from non-metropolitan to metropolitan areas. Working in non-metropolitan hospitals was related to older age, the father having completed less than 4 years of college education, non-metropolitan origin, non-capital city school graduation, and a diploma (vs. baccalaureate) degree. Conclusion: Admitting students with rural backgrounds, increasing rural nursing school admission capacities, and providing service-requiring scholarships, particularly for students from low-income families, are recommended to address geographical imbalances.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.1
• /
• pp.76-83
• /
• 2012

In a real-time indoor place recognition system using image features detection, specific markers included in input image should be detected exactly and quickly. However because the same markers in image are shown up differently depending to movement, direction and angle of camera, it is required a method to solve such problems. This paper proposes a technique to extract the features of object without regard to change of the object scale. To support real-time operation, it adopts SURF(Speeded up Robust Features) which enables fast feature detection. Another feature of this system is the user mark designation which makes possible for user to designate marks from input image for location detection in advance. Unlike to use hardware marks, the feature above has an advantage that the designated marks can be used without any manipulation to recognize location in input image.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.61-69
• /
• 1988

Recently the automization of wood manufacturing and the development of CNC machine tools becomes the center of interest. Cutting mechanism, tool wear and the roughness of machined surface have been studied. In the studies about wood for special uses, concrete data of cutting is desired. While Pinus densiflora is characterized that heartwood develops as age increases, Chunyang District has the characteristic of strength, red color, relatively regular chap and high heartwood - percentage. But there is no data about cutting this wood, Chunyang District. In this study face milling by sintered carbide tool was excuted to Chunyang District. Cutting force, Surface roughness and states were investigated with regard to cutting speed. Example results were as follows; 1) Mean cutting resistance against lateral component force and longitudinal component force decreased rapidly up to cutting speed of 155 m/min, and remains constant above this speed. 2) The surface roughness of cutting surface lowered as cutting speed increased, regardless of fiber formation. Radial rougness of fiber is larger than lineal surface roughness. 3) Increase in Cutting speed made machining mark restrained. Down-milling showed larger marks than up-milling.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.8
• /
• pp.33-40
• /
• 2006

A parallel computing strategy for finite element(FE) processing is described and implemented in nonlinear explicit FE code and its parallel performances are evaluated. A self-made linux-cluster supercomputer with 520 CPUs is used as a bench mark test bed. It is observed that speed-up is increased almost idealy even up to 256 CPUs for a large scale model. A communication over head and its effect on the parallel performance is also examined. Parallel performance is compare with the commercial code and developed code shows superior performance as the number of CPUs used are increased.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.10 no.1
• /
• pp.1-9
• /
• 1990

Tillering of orchardgrass during establishment year was considered as an important factor for ground cover and forage yield. Field experiment was conducted to examine seasonal fluctuation of tiller number in three cultivars of orchardgrass; Potomac, Hall-mark, and Sumas, after transplanting with five planting density. Also, effects of plant density and nitrogen application in cultivar, Potomac were studied on tillering, forage yield and various growth characteristics in pot experiment Tillers per plant decreased with increased density and showed seasonal variations. It increased up to July, decreased during summer months, and increased again from October. Sumas had less tillers than other cultivars, especially at high density. Tillers per unit area kept high during spring. After then, there was stady decrease through summer and remained constant without affecting by planting density. Nitrogen application increased tillers per unit area in Potomac up to 20kg/10a, but decreased its tiller production at 40kg/lOa. Maximum number of tiller was obtained in the combinations of 20kg application of nitrogen with higher density than 324 plant per square meter. Forage yield increased as nitrogen application increased, while it did not respond to plant density. Forage yield had high linear correlation between LAI, leaf number with a peak at 2800 culrns. For high forage yielding, it was suggested to obtain optimum number of tillers per unit area in early season as possible, applying of adequate amount of nitrogen with relative high density depend on cultural condition.