• Wind and Structures
• /
• 제16권5호
• /
• pp.433-455
• /
• 2013

A phase delay spectrum model towards the representation of spatial coherence of stochastic wind fields is proposed. Different from the classical coherence functions used in the spectral representation methods, the model is derived from the comprehensive description of coherence of fluctuating wind speeds and from the thorough analysis of physical accounts of random factors affecting phase delay, building up a consistent mapping between the simulated fluctuating wind speeds and the basic random variables. It thus includes complete probabilistic information of spatial stochastic wind fields. This treatment prompts a ready and succinct scheme for the simulation of fluctuating wind speeds, and provides a new perspective to the accurate assessment of dynamic reliability of wind-induced structures. Numerical investigations and comparative studies indicate that the developed model is of rationality and of applicability which matches well with the measured data at spatial points of wind fields, whereby the phase spectra at defined datum mark and objective point are feasibly obtained using the numerical scheme associated with the starting-time of phase evolution. In conjunction with the stochastic Fourier amplitude spectrum that we developed previously, the time history of fluctuating wind speeds at any spatial points of wind fields can be readily simulated.

• 한국정보통신학회논문지
• /
• 제6권1호
• /
• pp.99-102
• /
• 2002

다결정 실리콘층 아래의, 게이트 산화막이라고 불리는 높은 온도에서 형성된 산화막에서 핀홀이 관찰되었으며 그 메카니즘이 분석되었다. 다결정 실리콘층 아래의 산화막은 다른 다결정 실리콘층의 플라즈마 에칭 과정 동안에 파괴되어진다. 두 개의 다결정 실리콘층은 CVD증착에 의해 만들어진 0.8$\mu\textrm{m}$의 두꺼운 산화막에 의해 분리되어 있다. 파괴된 산화막들이 아크가 발생한 부분을 중심으로 흩어져 있으며 아크가 발생한 부분에서 생성된 극도로 강한 전계가 게이트 산화막을 파괴 시켰다고 가정된다. 아크가 발생한 부분은 Alignment key에서 관찰되었고 그리고 이것이 발견된 웨이퍼는 낮은 수율을 보여주었다. 아크가 발생한 부분이 칩의 내부가 아니더라도 게이트 산화막의 파괴에 의해 칩이 정상적으로 동작하지 않았다.

• Steel and Composite Structures
• /
• 제14권1호
• /
• pp.1-20
• /
• 2013

This paper presents the formulation for a novel force-based 1-D compound-element that captures both material and second order P-${\Delta}$ nonlinearities in steel frames. At the nodal points, the element is attached to nonlinear rotational and a translational springs which represent the flexural and axial stiffness of the connections respectively. By decomposing the total strain in the material as well as the generalised displacements of the flexible connections to their elastic and inelastic components, a secant solution strategy based on a direct iterative scheme is introduced and the corresponding solution strategy is outlined. The strain and slope of the deformed element are assumed to be small; however the equilibrium equations are satisfied for the deformed element taking account of P-${\Delta}$ effects. The formulation accuracy and efficiency is verified by some numerical examples on the nonlinear static, cyclic and dynamic analysis of steel frames.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 춘계학술대회
• /
• pp.32-34
• /
• 1994

An automatic multiframe procedure for tracking signalized points on multiple, differently moving discontinuous surface is described. The position of markers which attached on human body give us some important information such as velocity, acceleration, angular velocity and angular acceleration, etc, of the rigid objects. Generally, the detected objects occufying some area in images rather than a point because of the generic size of the marks or the smeared effects of the camera. To solve the problem we used a modified clustering algorithm.

• 대한의용생체공학회:의공학회지
• /
• 제15권1호
• /
• pp.27-34
• /
• 1994

In this paper. a way to analysis a corridor scene for a vehicle's automatic locomotion is presented In general, it's necessary for a vision system of vehicles to identify its positions in given environments. The suggested algorithm is to decide base lines of a corridor image using the vanishing point finding. Feature points are extracted on the base line using a base line extraction tree. This algorithm is suitable for a motorized wheelchair's self locomotion in a building.

• 한국식품조리과학회지
• /
• 제5권2호
• /
• pp.75-90
• /
• 1989

A survey on images and consumption for instant food for 419 housewives in Kyung-ki do were summarized as follows: 1) The thought of housewives takes 'convenient' as the best advantage in the image on instant food, generally speaking,'preference', 'hygienic concern' and 'eating frequently’ are moderate, while 'good for health' is shown with the lowest points. 2) The reasons why they take instant food are ascribed to the taste of the children by 63.6%, to 'convenient to cook' by 19.6%. 3) The reasons why they do not use instant food are attributed to 'bad for health’by 46.9% to 'too expensive' by 29.9%, and to 'doubtful in quality' by 16.3% 4) Instant noodle (Ramyun) and bread are consumed the most, and then consumption is shown from high to low in order of tomato-ketchup, ham, mayonnaise, instant liver and sausage. 5) Effects on purchasing instant food come from the date of manufacturing 43%, trade mark 24% the experience of previous use as high as 21.2%.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.193-194
• /
• 1998

This paper describes a multi-functional EEG (electroencephalogram) software. The software manages the patient's EEG data systematically and analyzes the signal and display the parameters on a PC monitor in real-time. Since the software provides various parameters simultaneously, user can observe patients multilaterally. Reference patterns of CSA and DSA can be captured and displayed on top of the monitor. And user can mark events of surgical operation or patient's conditions, so it is possible to jump to the points of events directly, when reviewing the recorded file afterwards. Many convenient functions are equipped and these are operated by mouse clicks.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1519-1522
• /
• 2009

We describe a 32" liquid-crystal display (LCD) with multi-touch sensing capability by integrating IR detector arrays onto the LED backlight plate. A transparent light guide is placed in front of the display screen, with IR LEDs disposed at its edges and emitting IR light into the light guide, the light is trapped by total internal reflection within the light guide to be as touch-sensing light. A physical contact with the acrylic plate surface will stimulate some trapped light to be escaped from the light guide and pass through LCD panel to be detected by the IR detectors. The touch-sensing LCD with this configuration can locate simultaneous multiple touche points on the touchable surface.

• ETRI Journal
• /
• 제33권2호
• /
• pp.259-266
• /
• 2011

We present a new method for an automated markerless system to describe, analyze, and classify human gait motion. The automated system consists of three stages: I) detection and extraction of the moving human body and its contour from image sequences, ii) extraction of gait figures by the joint angles and body points, and iii) analysis of motion parameters and feature extraction for classifying human gait. A sequential set of 2D stick figures is used to represent the human gait motion, and the features based on motion parameters are determined from the sequence of extracted gait figures. Then, a k-nearest neighbor classifier is used to classify the gait patterns. In experiments, this provides an alternative estimate of biomechanical parameters on a large population of subjects, suggesting that the estimate of variance by marker-based techniques appeared generous. This is a very effective and well-defined representation method for analyzing the gait motion. As such, the markerless approach confirms uniqueness of the gait as earlier studies and encourages further development along these lines.

• 전자공학회논문지B
• /
• 제29B권9호
• /
• pp.8-16
• /
• 1992

This paper presents a method which can recognized the Handwritten Korean characters by using a Context-Free Grammar. The input characters are thinned in order to dwindle the mount of data, the thinned characters are converted into one-dimension strings according to six-forms. when the point of contact among phonemes is found, two phonemes are seperated respectively by marking the index mark (\) at the points. The Context-Free Grammar to input characters is classified into group grammars concerning the similarity of phonemes, input characters are parsed by making use of the Pushdown automata method. As the bent parts in the Handwritten characters are found frequently, We try to correct the bent parts by using the parsing distance measure, which recognize characters according to minium value caused by measuring the weight distance between two sentences. In this experiment, the recognition rate shows 93.8% to 275 Handwritten Korean characters.