• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• no.2
• /
• pp.120-129
• /
• 2004

Urban stream restoration projects can improve water quality, wildlife habitats, urban landscape, outdoor recreation spaces, and urban microclimate. The objectives of this research were to investigate temperature cooling effect of urban streams by using satellite imagery, to evaluate environmental variables related to stream cooling effect, and to estimate the cooling effect of the Cheonggye stream restoration project of Seoul, Korea. Findings of this research can be summarized as follows. First, a method of estimating temperature distribution around urban streams by using satellite imagery was developed. Scatter plots of distance from stream edges and average temperature obtained through multiple buffering were used for the estimation. Second, urban temperature cooling effect of streams was estimated by comparing background temperature and temperature of each buffer zone. Third, environmental factors affecting stream cooling effect were also identified. Fourth, the temperature cooling effect of the restoration project was estimated based on three scenarios. An estimated cooling effect based on the average cooling effect of existing tributaries showed the most significant effect; $2.0^{\circ}C$ lower than the present level at the edge of the renovated stream. It was estimated that the temperature of the same area would be $1.4^{\circ}C$ cooler than the present level if the cooling effect of the Yangjaechun was used as the bench mark But the effect would be $1.2^{\circ}C$ lower than the present level if environmental variables related to the temperature cooling effect of urban streams were used as the bench mark.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.301-304
• /
• 2006

As is different from formerly used fixing camera method in this paper, proposed method that can measure the speed of vehicles and logarithm of vehicles in video. Vehicles that proposed method runs with 50km/h, 80km/h, 90km/h's the speed recording on Video Tape beginning point and time of reaching point draw, and calculated 47.57km/h, 81.20km/h, the 90.00km/h speed by time and distance, the tracking cars and the velocity detection in video with the 'begin-line mark' and the 'end-line mark' processing.

• Journal of Korean Society of Transportation
• /
• v.30 no.5
• /
• pp.83-90
• /
• 2012

Driver ordinarily takes sudden braking when urgent situation is developed or when the vehicle is involved in an unexpected accident. Therefore, the most common trace at a traffic accident scene is skid mark. Currently, in investigating traffic accident, overspeed is determined by the length of skid mark. However, in order to identify accurate cause of accident, estimation of pre-braking speed which takes into account speed reduction during transient time should be considered as a requirement. In a recent study, several ways to estimate pre-braking speed were suggested, but none considered to differentiate the decelerating transient brake section and skidding section. This study analyzed trends of decelerating transient brake section and skidding section by real braking test.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.5
• /
• pp.514-534
• /
• 2021

To estimate the territorial size of Reticulitermes speratus, a species of subterranean termites that damages wooden structures in Korea, appropriate dye markers were selected and the diffusion tendency was analyzed. According to the results of the sensitivity assessment using sawdust diet, increase in dye concentration reduced the amount of feed consumption but the dyeing becomes more intense. Except for the Neutral Red 0.5% group, all other concentration groups, including the control group, showed a survival rate of > 85% until week 4. For both, Nile Blue A and Neutral Red dye markers, all concentration conditions > 0.2%, except for the 0.1% concentration, were maintained for 11 weeks, and no sign of transfer effect was found except when the termites were fed with the dye markers. Therefore, it appears that 0.2% of Nile Blue A and Neutral Red is the optimal concentration for monitoring the R. speratus colonies. Additionally, we prepared an indoor 40 m long foraging arena consisting of a colony of 25,000 termites and released individuals stained with 0.2% of Nile Blue A and Neutral Red at both ends to assess the diffusion trends over time. The results showed that it took approximately 7 days for each dyed individual to gradually cover the 40 m distance and mix with each other. These findings reveal that when mark-release-recapture monitoring is conducted on the R. speratus colonies damaging wooden structures, the extent of the colony's activity area could be measured and different colonies could be distinguished from each other.

• Journal of architectural history
• /
• v.14 no.4 s.44
• /
• pp.73-86
• /
• 2005

The purpose of this study is to prove the correlations among various factors what determined to formation of front elevation proportion system through making an actual survey and investigating. According to the analysis of them, we make conclusions as follows; 1, On the assumption that average distance of 1Kan(間) is 1, the height of foundation is 0.21, the height of floor from foundation is 0.24, the height of normal column from floor is 0.85, the height of eaves from foundation is 1.10. 2. Southeast faced buildings are wider than southwest faced buildings in the distance of 1Kan (間) in the range of $110{sim}220mm$. The height of foundation and floor in the southeast faced buildings are higher than those in southwest faced buildings beside the height of normal column, eaves, high column in the southwest faced buildings are higher than those in southeast faced buildings. 3. As number of front Kan(間) increases, the distance of 1Kan(間) decrease and the height of eaves and high column(高柱) increases. This is cause of making a maximum needed inner space by increasing the distance of 1Kan(間). This is an wisdom for living from ancestors. 4. As number of Dori(道里) increases, the distances of 1Kan are nearly same but the height of eaves and high column(高柱) increases about 300mm, This is a natural result from an increasing of building scale. 5. The distance of 1Kan(間) in later 19C building is most wide but, the unit heights are minimal average values at year 1900 as a reference mark. After this, the height of normal column, eaves, high column are higher about $170{sim}330mm$. 6. The number of Kan in front elevation, Dori(道里), and direction of building have correlations each other in proportion system of traditional housing An-Chae with significant level, p<0.05.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.78-86
• /
• 2019

Recently, IoT researches using sensor data based on embedded networks in various fields including healthcare and sports have been continuously attempted. This study analyzes golf ball mobility to support IoT application in golf sports field. Generally, since the difference in density occurs due to the condition of the inner material and the abnormal state at the time of the outer skin joining during the manufacturing of the golf ball, the weight of each subset is equal for any two points with the same radius in the sphere cannot be guaranteed. For this reason, the deflected weight of the sphere has the undesirable effect of hitting the ball in a direction in which the weight of the ball is heavy. In this study, it is assumed that there is a unique center of gravity of the ball, and even if the golf ball cannot be manufactured perfectly, it wants to establish the basic principle to accurately recognize or mark the putting line based on the center of gravity. In addition, it is evaluated how the mobility of the golf ball with a deviation from the center of gravity of the golf ball affects the progress path (or movement direction) and the moving distance (or carry distance) after the golfer hits. The basic model of the mobility of the golf ball can help the golfer exercise model and the correlation analysis. The basic model of the mobility of the golf ball can help the golfer exercise model and the correlation analysis.

• Journal of Environmental Health Sciences
• /
• v.34 no.2
• /
• pp.175-182
• /
• 2008

This study investigates the optimal conditions for electrogenerated hydrogen peroxide production and the application of the electro-Fenton process using DSA electrodes. The influences of parameters for the hydrogen peroxide generation such as electrode materials, electrolyte concentration, current, pH, air flow rate and electrode distance were investigated using a laboratory scale batch reactor. The relative performance for hydrogen peroxide generation of each of the six electrodes is : Ru-Sn-Ti > Ru-Sn-Sb > Ru > Ir > Pt > Sn-Sb. Optimum NaCl dosage, current and air flow rate were 2.0 g/l, 12.5 A and 2 l/min, respectively. When the pH is low, hydrogen peroxide concentration was high. Electrode distance dos not effect to a hydrogen peroxide generation. A complete color removal was obtained for RhB (200 mg/l) at the 8 min mark of the electro-Fenton process under optimum operation conditions of $Fe^{2+}$ 0.105 g/l and 5.0 A. The electro-Fenton process increased initial reaction and decreased final reaction time. However the effect was not high.

• Journal of Korea Multimedia Society
• /
• v.5 no.1
• /
• pp.47-56
• /
• 2002

Previous buffer cache schemes for multimedia storage systems only exploited the sequential references of multimedia files and didn't consider looping references. However, in some video applications like foreign language learning, users mark the scene as loop area and then application automatically playbacks the scene several times. In this paper, we propose a new buffer replacement scheme, called HBM(Hybrid Buffer Management), for multimedia storage systems that have both sequential and looping references. Proposed scheme assumes that application layer informs reference pattern of files to file system. Then HBM applies an appropriate replacement policy to each file. Our simulation experiments show that HBM outperforms previous buffer cache schemes such as DISTANCE and LRU.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.36.1-36.1
• /
• 2010

The Redshift Search Receiver (RSR) is a sensitive, ultra-wideband spectrometer that is being built at the University of Massachusetts as one of the facility instruments for the 50-m Large Millimeter Telescope (LMT). It consists of four receivers each covering the entire 3 mm window from 74 to 111 GHz instantaneously. The primary goal of the receiver is to detect multiple molecular lines in galaxies at any distance and uniquely determine the redshift, in particular dust-obscured star forming systems at high-z which are not easily accessible. I will present some results from commissioning of the RSR on the Five College Radio Astronomy Observatory 14-m telescope, and discuss the future of the receiver.

• Journal of the Korean Ceramic Society
• /
• v.24 no.5
• /
• pp.484-490
• /
• 1987

Diffusion coupling experiment was done to study expansion of body and soild reaction in BaCO3-TiO2 system. Specimen of BaCO3 and TiO2 was formed with Pt-mark's method. Each specimen was fired at interval of 25℃ from 900℃ to 1000℃ for 2hrs. After that, specimen was fixed with resin and polished. Product layers of specimen were observed with SEM and EDS. The result were following; 1. Diffusion component is Ba2+, which diffuse toward TiO2. 2. Large crack between layer of BaCO3 and Ba2TiO4 was generated because of difference of thermal expansion coefficient. 3. Ba2TiO4 is formed to TiO2 body by the reaction of BaTiO3 and BaO and its structure is very porous. 4. BaTiO3 changes immediately to Ba2TiO4 by the reaction of BaO. But BaTiO3 which formed by the reaction of TiO2 and Ba2TiO4 exsists as layer because the diffusion distance of Ba2+ is far.