• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권4호
• /
• pp.345-352
• /
• 1999

This study was conducted for the purpose of suggestion of the new technique of sagittal split ramus osteotomy pararell to the true sagittal plane. This pararellism is the important concept of the sagittal split ramus osteotomy to reduce the condylar sagging including mandibular hypomobility, temporomandibular disorder, occlusal relapse and other complications. We used 26 adult dry manibles(52 rami), and obtained the computed tomographs through the sagittal, horizontal and coronal sections. The results were obtained as follows. 1. On sagittal section, mean area of S1 was $8.63{\pm}2.10cm^2$, S2 was $8.93{\pm}1.94cm^2$, S3 was $9.49{\pm}2.15cm^2$, S6 was $10.72{\pm}2.22cm^2$. The wider area of sagittal section, the more lateral section, But, no significant differency between the areas of the sagittal sections(P>0.05). 2. On horizontal section, The distance between the inferior alveolar canal and the lateral cortical plate of the mandibular ramus were $6.73{\pm}1.24mm$ minum, $7.70{\pm}1.44mm$ maximum. 3. On coronal section, Outer mandibular angle were $4.84{\pm}2.37^{\circ}$ right side, $4.93{\pm}2.12^{\circ}$ left side. 4. The design of the ideal true sagittal split ramus osteotomy is that posterior border of osteotomy must be limited vertically, at the right posterior point of lingula mandibularis and anterior of osteotomy must be extended to mandibular body, anteroinferiorly.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제29권6호
• /
• pp.407-420
• /
• 2003

Purpose : The purpose of this study was to analyse the facial changes and factors contributing to then after bilateral sagittal split ramus osteotomy of mandibular prognathism. Materials and Methods : Forty patients with Class III dental and skeletal malocclusion who were treated with bilateral sagittal split ramus osteotomy were reviewed. Frontal and lateral cephalometric radiographs were taken preoperatively, immediate postoperatively and more than six months postoperatively in each patient. After tracing the cephalometric radiographs, various parameters were measured. Results : 1. Gonial angle at postoperative two days was decreased about $10.4^{\circ}$ than preoperatively and gonial angle at postoperative six months was increased about $6.8^{\circ}$ than postoperative two days. So, gonial angle at postoperative six months was decreased about $3.6^{\circ}$ than preoperative gonial angle. 2. Facial height postoperative two days was decreased about 0.8mm than preoperatively and facial height at postoperative six months was decreased about 0.7mm than postoperative two days. So, facial height at postoperative six months was decreased about 1.5mm than preoperative facial height. 3. Mandibular width postoperative two days was decreased about 1.0mm than preoperatively and mandibular width at postoperative six months was increased about 1.8mm than postoperative two days. So, mandibular width at postoperative six months was decreased about 2.8mm than preoperative mandibular width. 4. Amount of set back and mandibular plane angle were not influencing on relapse degree. Conclusion : It is thought that bilateral sagittal split ramus osteotomy in mandibular prognathic patients is effective to improve long face and steep gonial angle. More prudent operation and careful postoperative management is required to maintain stable face postoperatively. Further research for soft tissue changes and factors which are related with relapse is needed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제23권1호
• /
• pp.21-30
• /
• 2001

The purpose of this study was to evaluate the skeletal relapse pattern of the mandibular prognathic patients after mandibular set back surgery by sagittal split ramus osteotomy. The horizontal and vertical position of the cephalometric points were measured before, after surgery and after one-year follow up period. The next, the positional change of the proximal and distal mandibular segment were evaluated respectively. The obtained results were as follows; 1. The horizontal and vertical position of Cd was not changed before and after surgery, and it was maintained its original position during the observation periods. 2. As the mandibular prognathism of the patients was severe before surgery, the more skeletal relapse tendency was observed during follow-up period(p<0.05). 3. As the horizontal positional change of the mandible which was obtained by mandibular set-back surgery was large, the more horizontal relapse tendency was observed during follow-up period(p<0.05). 4. The corpus axis angle decreased by sagittal split ramus osteotomy(p<0.01), but it was kept its reoriented position during follow-up period. 5. During the follow-up period after mandibular set-back by sagittal split ramus osteotomy, the forward relapse of mandible correlated with not only the forward rotation of the proximal segment but also the forward movement of the distal segment(p<0.05).

• Archives of Plastic Surgery
• /
• 제34권1호
• /
• pp.137-139
• /
• 2007

Purpose: The mandibular ramus sagittal split osteotomy is a common procedure in cosmetic surgery. A late complication of this procedure, pseudoaneurysm rarely happens. The purpose of this case is to present our experience that is rare late vascular complication after mandibular ramus sagittal split osteotomy. Methods: A 21-year-old male was operated by local plastic surgeon for treatment of mandibular prognathism. After 9 days, the man was transferred to our hospital with persistent bleeding and swelling on the mandibular area. We operated the man three times and failed to control hemorrhage. Therefore, we did angiography and found the pseudoaneurysm on the buccal and pterygoid branches of internal maxillary artery. Then we did selective embolization for removal of the pseudoaneurysm. Results: The man was operated using the therapeutic embolization, and the pseudoaneurysm was removed. The results were successful, and we couldn't find any bleeding and the pseudoaneurysm during the follow-up of 12 months. Conclusion: The selective embolization is the good therapeutic method of late vascular complication after mandibular ramus sagittal split osteotomy.

• Imaging Science in Dentistry
• /
• 제36권4호
• /
• pp.183-188
• /
• 2006

Purpose: The purpose of this research was to study bone changes after bilateral sagittal split osteotomy through fractal analysis and measurement of mandibular cortical thickness. Materials and Methods: This study included twenty-two prognathic patients who underwent bilateral sagittal split osteotomy. Panoramic radiographs of these patients were taken immediately before operation and at 1 month, 6 months, and 12 months postoperatively. The fractal dimension was measured by the box-counting method in the region of interest centered on both the basal and interdental bones between the first and second mandibular molars. Measurements of mandibular cortical thickness were taken both in the area between the first and second mandibular molars and at the osteotomy site. Changes of fractal dimension and cortical thickness over four stages were statistically analyzed. Results: The fractal dimension of the mandibular basal bone before surgery and after 1 month, 6 months and 12 months were $1.4099{\pm}0.0657,\;1.382{\pm}0.0595,\;1.2995{\pm}0.0949,\;and\;1.4166{\pm}0.0676$, respectively (Repeated-measures ANOVA, P<0.001). However, no statistically significant differences were noted in interdental fractal dimensions among the four stages. Mandibular cortical thickness between the first and second mandibular molars before operation and after 1 month, 6 months and 12 months was $3.74{\pm}0.48mm,\;3.63{\pm}0.47mm,\;3.41{\pm}0.61mm\;and\;3.55{\pm}0.66mm$ (P<0.01), respectively. Mandibular cortical thickness at the osteotomy site at each of the four stages was $3.22{\pm}0.44mm,\;2.87{\pm}0.59mm,\;2.37{\pm}0.61mm\;and\;2.64{\pm}0.62mm$, respectively (P<0.001). Conclusion: This study suggests that the mandibular tissue continued decreasing for 6 months postoperatively and then increased over the subsequent 6 months.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제41권2호
• /
• pp.102-108
• /
• 2015

In surgery for facial asymmetry, mandibles can be classified into two types, rotational and translational, according to the required mandibular movements for surgery. During surgery for rotational mandibular asymmetry, a bilateral sagittal split ramus osteotomy (BSSRO) may cause a large bone gap between the proximal and distal segments as well as condylar displacement, resulting in a relapse of the temporomandibular joint disorder, especially in severe cases. The intraoral vertical ramus osteotomy has an advantage, in this respect, because it causes less rotational displacement of the proximal segment on the deviated side and even displaced or rotated condylar segments may return to their original physiologic position. Unilateral intraoral vertical ramus osteotomy (UIVRO) on the short side combined with contralateral SSRO was devised as an alternative technique to resolve the spatial problems caused by conventional SSRO in cases of severe rotational asymmetry. A series of three cases were treated with the previously suggested protocol and the follow-up period was analyzed. In serial cases, UIVRO combined with contralateral SSRO may avoid mediolateral flaring of the bone segments and condylar dislocation, and result in improved condition of the temporomandibular joint. UIVRO combined with contralateral SSRO is expected to be a useful technique for the treatment of rotational mandibular asymmetry.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권4호
• /
• pp.334-345
• /
• 2005

The purpose of this study was to compare the postoperative stability and relapse according to 2 different fixation methods after bilateral sagittal split ramus osteotomies in mandibular prognathic patients. Tweenty one patients with Class III dental and skeletal malocclusion who were treated with bilateral sagittal split ramus osteotomy were selected for this retrospective study. We classfied the patients into two groups according to the fixation methods of bony segments after osteotomies. Group W (n = 10) had the bone segments fixed with nonrigid wire and Group S (n = 11) had bicortical screws inserted in the gonial area through a transcutaneous approach. Cephalometric radiographs were taken preoperatively, immediate postoperatively and more than six months postoperatively in each patient. After tracing the cephalometric radiographs, various parameters were measured. Before surgery, both groups were balanced with respect to linear and angular measurements of craniofacial morphology. Mean posterior sagittal setback amounts of the mandibular symphysis was 8.6 mm in the wire group and 6.79 mm in the rigid group, Six months postoperatively, the wire group had 33.1% relapse of the mandibular symphysis and 22.8% in the rigid group relapse. Both groups experienced changes in the orientation and configuration of the mandible. It is thought that Rigid screw fixation is a more stable method than nonrigid wire fixation for maintaining mandibular setback after sagittal split ramus osteotomy.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권5호
• /
• pp.359-367
• /
• 2004

Purpose: After the surgical correction with sagittal split ramus osteotomy, the position of the mandibular condyle in the glenoid fossa and the proximal segment of the mandible change because of bony gap between proximal and distal segment, especially in case of mandibular setback asymmetrically. In this study, positional changes in the condyle and proximal segment after BSSRO were estimated in the mandibular asymmetry patient by analyzing the in submentovertex view and P-A cephalogram for identification of ideal condylar position during surgery. Patients and Methods: The 20 patients were selected randomly who visit Dankook Dental Hospital for mandibular asymmetry. Bilateral sagittal split ramus osteotomy with rigid fixation was performed and P-A cephalogram and submentovertex view was taken at the time of preoperative, immediate postoperative, 3 month postoperative period. Results: Intercondylar length and transverse condylar angle was increased due to inward rotation of proximal segment and anteromedial rotation of lateral pole of condyle head. The condylar position had a tendency to return to the preoperative state and after 3 months return up to about half of the immediate post-operative changes, and all the results showed more changes in asymmetry patient and deviated part of the mandible. Conclusion: Based on all these results above, surgeon should make efforts to have a precise preoperative analysis and to have a ideal condylar position during rigid fixation after BSSRO.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제41권3호
• /
• pp.133-138
• /
• 2015

Objectives: To evaluate the influence of the type of osteotomy in the inferior aspect of the mandible on the mechanical performance. Materials and Methods: The study was performed on 20 polyurethane hemimandibles. A sagittal split ramus osteotomy (SSRO) was designed in 10 hemimandibles (group 1) with a vertical osteotomy in the buccal side (second molar level) and final osteotomy was performed horizontally on the lingual aspect, while the mandible body osteotomy was finalized as a straight osteotomy in the basilar area, perpendicular to the body. For group 2, the same osteotomy technique was used, but an oblique osteotomy was done in the basilar aspect of the mandibular body, forming continuity with the sagittal cut in the basilar area. Using a surgical guide, osteosynthesis was performed with bicortical screws using an inverted L scheme. In both groups vertical compression tests were performed with a linear load of 1 mm/min on the central fossa of the first molar and tests were done with models made from photoelastic resin. Data were analyzed using Student's t-test, establishing a statistical significance when P<0.05. Results: A statistical difference was not observed in the maximum displacements obtained in the two osteotomies (P<0.05). In the extensiometric analysis, statistically significant differences were identified only in the middle screw of the fixation. The photoelastic resin models showed force dissipation towards the inferior aspect of the mandible in both SSRO models. Conclusion: We found that osteotomy of the inferior aspect did not influence the mechanical performance for osteosynthesis with an inverted L system.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제41권3호
• /
• pp.156-164
• /
• 2015

Bilateral sagittal split ramus osteotomy is considered a standard technique in mandibular orthognathic surgeries to reduce unexpected bilateral stress in the temporomandibular joints. Unilateral sagittal split ramus osteotomy (USSO) was recently introduced to correct facial asymmetry caused by asymmetric mandibular prognathism and has shown favorable outcomes. If unilateral surgery could guarantee long-term postoperative stability as well as favorable results, operation time and the incidence of postoperative complications could be reduced compared to those in bilateral surgery. This report highlights three consecutive cases with long-term follow-up in which USSO was used to correct asymmetric mandibular prognathism. Long-term postoperative changes in the condylar contour and ramus and condylar head length were analyzed using routine radiography and computed tomography. In addition, prior USSO studies were reviewed to outline clear criteria for applying this technique. In conclusion, patients showing functional-type asymmetry with predicted unilateral mandibular movement of less than 7 mm can be considered suitable candidates for USSO-based correction of asymmetric mandibular prognathism with or without maxillary arch surgeries.