• 대한치과교정학회지
• /
• 제14권1호
• /
• pp.75-92
• /
• 1984

This study attempted to analyze the distribution of stress, to examine the bending effect in the mandible according to the pulling directions and determine on which pulling directions are adequate when an orthopedic force was applied to the mandible. An orthopedic force, 500gm, was applied to the gnathion, one point of the chin area, in three directions. The three directions were ; high puli' from gnathion to the center of condyle head, and vertical pull, from gnathion to a parallel line with the posterior border of the ramus, and medium pull, from the gnathion to a parallel line with the lower border of mandible. The distribution of principal stress, bending moment and amount of displacement within the mandible was analyzed by a 3-dimensional finite element method and that of the various portions of mandible were computed and compared according to the pulling directions. The results were as follows : 1. The bending moment of each part of a mandible has been found to be markedly larger in case of vertical pull than in case of either high pull or medium pull. In vertical pull the bending moment turned out to largest at the condyle head and neck portion, the gonial angle portion, the coronoid portion and the ascending ramus portion, respectively, while comparatively large at the cuspid and bicuspid portion and the first molar portion. In case of high pull it was largest at the gonial angle portion and becoming smaller at the coronoid portion, the ascending ramus portion, the condyle head and neck portion, and the cuspid and bicuspid portion, in that order. In case of medium pull, however, the bending moment was largest at the condyle head and neck portion, becoming smaller at the first molar portion, the ascending ramus portion, the coronoid portion, the cuspid and bicuspid portion, and gonial angle portion, in that order. 2. As for the bending effect it was calculated to be mostly oriented downward at the mandibular body and backward at the mandibular ramus in both high pull and vertical pull. In case of medium pull it was oriented upward at the mandibular body and forward at the mandibular ramus. 3. The bending effect also turned out to be mostly oriented outward in case of high pull and medium pull, and inward in vertical pull. 4. At the mandibular body and ramus, the bending effect in the upward-downward direction and that in the forward-backward direction were found to be larger than in the inward-outward direction. 5. If and when we expect any correcting effect on the mandibular protrusion by means of the chin cup appliance, we can say sure as conclusion that high pull and vertical pull are more effective than medium pull.

• Journal of Oral Medicine and Pain
• /
• 제34권3호
• /
• pp.333-340
• /
• 2009

골수염은 골수의 염증을 의미하며 임상적으로는 골을 구성하고 있는 조직등의 염증을 포함한다. 일반적으로 골수에서 시작되어 수질내로 확장되며 피질골, 골막등에 이환되어 골 전반에 걸친 골괴사를 야기시킨다. 원인은 일반적으로 세균에 의한 감염으로 여겨지며 항생제의 발달로 그 유병율이 감소하였으나 여전히 외상, 매독, 만성 신질환, 알코올 중독, 영양결핍, 방사선 조사나 화학적 항암요법은 골의 감염을 위험하는 인자로 알려져 있다. 골수염의 치료는 비교적 까다로우며 난치성으로 진행될 가능성이 있다. 특히 소아에서는 하악구조가 성숙이 덜되어 있어 염증이 쉽고 빠르게 퍼진다. 따라서 소아에서는 골수염을 조기에 발견하고 치료하는 것이 중요하다. 또한 소아는 성장중이므로 악골의 성장 또한 고려해야 하므로 조기발견이 더욱 중요하다고 볼 수 있다. 특히 하악골중에서 하악과두는 하악골 성장의 중요한 곳으로 하악과두의 질환발생시 하악성장율감소, 안면비대칭과 같은 큰 문제를 야기할 수 있어 주의가 요구된다. 하악과두의 골수염은 대부분 치성감염이나 하악골절후의 감염으로 발생한다. 단, 소아의 경우에는 특별한 감염원인 없이 하악의 골수염이 발생했다는 보고도 있다. 이에 저자는 9세의 소아에서 뚜렷한 원인을 찾기 어려운 하악과두의 골수염을 경험하였기에 증례보고와 함께 문헌고찰을 하고자 한다.

• 한국임상수의학회지
• /
• 제25권6호
• /
• pp.545-548
• /
• 2008

A 3-year-old castrated male Siberian husky was presented for evaluation after being hit by a car. On physical examination, the dog showed open-mouth, displacement of mandible and hypersalivation with blood ting. The base of tongue was transected almost 80% on the bias from right dorsal side to the left ventral side. Radiography demonstrated separation of mandible symphysis, and fracture of right condyle and vertical ramus. After debridement of the necrotic tissue, tongue apposition with simple interrupted suture was performed. Mandibular symphysis, condyle and mandibular vertical ramus fractures were fixed using pin, cerclage wire, T-plate, and K-wires. The mouth was irrigated daily using chlorhexidine after surgery. The sutures that were loose here or untied at tongue were re-sutured under sedation. The transected tongue was healed and recovered its normal movement after 6 weeks.

• 대한치과교정학회지
• /
• 제22권2호
• /
• pp.345-372
• /
• 1992

The purpose of this experiment was to study the effects of changes of mandibular position on temporomandibular joint in internal derangement patients Twenty-four female New Zealand White Rabbits, weighing over 3.5kg, were utilized in this study . Bilateral temporomandibular joint surgery was performed in twenty-one of the rabbits to displace disc anteriorly through incising the retrodiscal tissue 1-2mm posterior to the disc, thus inducing internal derangement. They were divided into three groups nine were left untreated after surgery, six were fitted with functional protrusive appliances 4 weeks after surgery, and six wore collar appliances to apply 4 ounces of mandibular refractive force per side 4 weeks after surgery. The remaining three served as the control group. Histologic examinations were performed after sacrificing them by threes at 4-week intervals. The results were as follows. 1. Histologic findings similar to internal derangement were observed in the rabbits whose retrodiscal tissues had been incised. 2. In the rabbits untreated after surgery, articular surface on condylar process and articular eminence showed severe erosion and deformation, and displaced disc manifested changes in both shape and internal architecture. 3. Functional protrusion after surgery resulted in progressive remodeling on postero-superior portion of condyle and glenoid fossa, while it also brought about erosion on articular eminence and anterior portion of condyle. 4. Mandibular retraction after surgery resulted in compression of retrodiscal tissue and regressive remodeling of posterior portion of condyle.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권2호
• /
• pp.164-170
• /
• 2005

The purpose of this study was to compare a sample of patients who had condylar fractures treated with open reduction using different plating techniques, to evaluate which plating technique is useful for stable fixation for fractures of the mandibular condyle and to evaluate effectiveness of resorbable miniplate. There were 60 patients (41 males, 19 females) whose condylar fractures were treated with open reduction. Rigid fixation was performed with a single miniplate, double miniplate ot one miniplate & one microplate and single resorbable plate. All patients remained intermaxillary fixation for 1 week postoperatively. Active physiotherapy was started after 2 weeks postoperatively. Radiographic evaluation (plate fracture, plate bending, screw loosening, displacement of condyle etc.) was performed at pre-operative, immediate, 2 weeks, 1 month, 3 months, 6 months after surgery. Clinical evaluation included degree of mouth opening, occlusion, mandibular lateral excursion, infection and facial nerve paralysis. In radiographic evaluation, displacement of fractured condylar segment associated with plate bending or screw loosening were showed 6 cases and 3 cases for single miniplate system and resorbable miniplate system. There was no patients who have this problem on double miniplate system. The results revealed that the application of two miniplates were more recommendable than single miniplates. When we select resorbable miniplate system, we should consider the type of fractures, post-operative treatment protocol and surgical technique.

• 대한치과교정학회지
• /
• 제24권4호
• /
• pp.945-956
• /
• 1994

In the past the jaw and occlusal relationship in centric occlusion were merely considered in case of orthodontic diagnosis and treatment planning. As the fact that functional disturbance of the temporomandibular joint may be caused by occlusal interference was recognized, the importance of functional occlusion and centric relation is emphasized today. Known the importance of centric relation, there are various opinions about definition of centric relation and its taking methods. The purpose of this study was to investigate the relative centric condyle position and to compare the reproducibility of the recordings utilizing different centric relation records obtained by different taking methods. The 15 adults with normal occlusion were participated in this study. Every four centric relation records were taken in each of three methods - leaf gauge, Dawson and myomonitor method. Then the relative centric condyle position, the distance between the condylar position in centric occlusion and the position in centric relation and the reproducibility were studied using SAM 2 articulator and mandibular position indicator. The results were as follows ; 1. The trend of condyle position was different depending on centric relation taking methods. 2. The position of condyle in centric relation by leaf gauge and Dawson methods was superior to that by myomonitor method, and the position by myomonitor method was relatively antero-inferior. 3. The distance between the condylar positions in centric occlusion and the position in centric relation was longest in myomonitor method. 4. The reproducibility had little differences in transverse direction among three methods, while leaf gauge method showed the highest reproducibility and myomonitor method did the lowest reproducibility in antero-posterior and supero-inferior direction.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제14권4호
• /
• pp.283-294
• /
• 1992

Functional recovery associated with mouth opening after mandibular condyle fracture was a contradictory result of many authors. The treatment goal of condyle fracture has been not only the good reduction and fixation but also the rapid functional recovery with mouth opening capacity. The purpose of this study is to evaluate the mouth opening capacity after surgical or non-surgical treatment of condyle fracture according to the site, level, maxillomandibular fixation(MMF) and operation method based on 39 patents with condyle fracture who were admitted to the department of oral and maxillofacial surgery, Wonkwang University Hospital from May.1, 1990 to Aug.31, 1992. The results were as follows. 1. The most common fracture site was level IV (17 cases : 42.2%) and level I (14 cases : 36.8%), level II (5 cases: 13.2%) and level III(3 cases : 7.9%) were in decreasing order of frequency. Compound fracture with symphysis was more frequent (69.2%) than simple fracture(30.8%). 2. The mouth opening capacity was increased in the level I compared with level IV. 3. The mouth opening capacity was increased in the group of segment removal. 4. The mouth opening capacity was increased in the MMF period was decreased. 5. Better mouth opening capacity was recorded in the physical therapy group of more than 3-4 weeks of treatment period.

• 대한치과의사협회지
• /
• 제56권3호
• /
• pp.134-141
• /
• 2018

Purpose: To measure the head tilting angle creating initial condylar cut-off and to find the head position inducing the superimposition of the cervical vertebrae over the mandibular ramus on panoramic radiograph. Materials and Methods: The panoramic radiographs were taken with Didactic skull on cervical spine model (Scientific GmbH, Hamburg, Germany) using Kodak 8000c Digital Panoramic radiography. For the inherent radiolucency of the plastic skull model, radiopaque 1 mm diameter lead wires were attached along the margin of the mandibular condyle, ramus, mandibular body, cervical vertebrae, and FH plane of the skull model. For measuring the head tilting angle creating the condylar head cutoff, panoramic radiographs were taken by tilting the FH plane downward in 5 degree increments. For finding the distance between transverse process of the third cervical vertebra and gonion inducing superimposition of cervical vertebrae on the mandibular ramus, panoramic radiographs were taken by decreasing the distance in 0.5 cm increments. Result and Conclusion: The condylar cutoff began to appear when the head of skull model was tilted downward by 15o. As the head tilting angle increasing, the condylar cutoff became more prominent. The superimposition of cervical vertebrae over the mandibular ramus began to appear when the distance between the gonion and third cervical vertebra was 1.0 cm. As the distance decreasing, the superimpostion became more prominent.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제12권2호
• /
• pp.9-20
• /
• 1990

A series of 19 cases with maxillary hyperplasia and mandibular retrognathia were operated on by simultaneous superior repositioning of the maxilla after Le Fort I osteotomy and anterior repositioning of the mandible after bilateral sagittal split ramus osteotomies with or without osteotomy of the inferior border of the mandible. These were evaluated by retrospective cephalometric and computer analysis for the longitudinal skeletal and dental changes for an average of 17.1 months after surgery. For stabilization of the osteotomized segments, the authors used wire osteosynthesis by means of bilateral infraorbital and zygomatic buttress suspension wire at the maxilla, and direct interosseous wire at the split segments of the mandibular rami. Results show generally good stability after simultaneous maxillary and mandibular surgery with wire osteosynthesis, and a minimal to moderate tendency toward skeletal and dental relapse. This article is a preliminary study to defy the efficiency of the wire osteosynthesis (wo)compared with rigid internal fixation (RIF) for simultaneous maxillary and mandibular surgery. 1. The vertical relapse rate of the A point after superior repositioning of the maxilla is 2.2%. 2. The horizontal relapse rate of the B point after advancement of the mandible is 18.3%. 3. The condyle is distracted inferiorly and slightly posteriorly at the immediate postoperative period. 4. At the long term follow up examination, the condyle presents tendency of return to the preoperative position. 5. Condylar segment angle is decreased at the immediate postoperative period, and at the long term follow up evaluation, the angle is increased. 6. Gonial angle is increased at the immediate postoperative period, and then is decreased at the long term follow up evaluation. 7. The dentition is satisfactory with acceptable movement at the long term follow up evaluation. 8. At the mandibular free body analysis, genioplasty shows good stability. 9. Wire osteosynthesis provides excellent stabilization for the simultaneous maxillary and mandibular surgery.

• 대한치과보철학회지
• /
• 제27권1호
• /
• pp.55-81
• /
• 1989

Recently the instantaneous center concept has been to understand the biomechanics by which a tissue derangement causes a mechanical derangement in human joint. Therefore, to understand the biomechanics of temporomandibular joint (T.M.J.) as a part of human joint, it is necessary to clarify the instantaneous center of rotation (I.C.R.) in the mandibular movement. Twenty male subjects without T.M.J. disorder and mandibular deviation during the mandibular movement were selected for this study. The habitual opening and closing paths were recorded on the paper of the sagittal metal plate by two pencil markers connected to the resin open clutch attached on the lower teeth, which was designed for this study. The coordinates of the 33-target points and the 109-anatomical landmarks were obtained using a Summagraphic digitizer connected to a 18AT computer. The original raw data of the opening and closing paths were smoothed by B-spline curve fitting technique and then the I.C.R. pathways were determined mathematically by the computer using algorithm for finding the I.C.R. of a planer rigid body model. Also the opening and closing movements of the mandible were simulated according to the determined I.C.R. The results obtained from this study were as follows. 1. At the early opening and the last closing, I.C.R's were almost distributed around the mastoid process outside the mandibular body without the presence in the region of the mandibular condyle. 2. The I.C.R. pathway showed variable patterns to each subject at the opening and closing movements. 3. The K constant with uniform pattern was obtained by the rotation angle times the radius, which was assumed to the index of the mandibular movement. 4. The opening and closing movements of the mandible were simulated by the I.C.R. pathways at the habitual opening and closing movements. 5. The mandibular condyle was rotated or translated accordng to the relative rotation angle and radius of the determinant factors of K contant.