• Journal of the Korea Computer Graphics Society
• /
• v.23 no.5
• /
• pp.19-27
• /
• 2017

In this paper, we propose an automatic segmentation method of the mandible using shape-constrained information in cranio-maxillo-facial CBCT images. The proposed method consists of the following two steps. First, the mandible segmentation based on the global shape information is performed through the statistical shape model generated using the MDCT images. Second, improvement of mandible segmentation is performed considering the local shape information and intensity characteristics of the mandible. To evaluate the performance of the proposed method, the proposed method was evaluated qualitatively and quantitatively based on the results of manual segmentation by expert. Experimental results show that the Dice Similarity Coefficient of the proposed method was 95.64% and 90.97%, respectively, in the mandible body region including the narrow region of large curvature and the condyle region with large positional variance.

• Radiation Oncology Journal
• /
• v.37 no.2
• /
• pp.134-142
• /
• 2019

Purpose: The aim is to study the dependence of deformable based auto-segmentation of head and neck organs-at-risks (OAR) on anatomy matching for a single atlas based system and generate an acceptable set of contours. Methods: A sample of ten patients in neutral neck position and three atlas sets consisting of ten patients each in different head and neck positions were utilized to generate three scenarios representing poor, average and perfect anatomy matching respectively and auto-segmentation was carried out for each scenario. Brainstem, larynx, mandible, cervical oesophagus, oral cavity, pharyngeal muscles, parotids, spinal cord, and trachea were the structures selected for the study. Automatic and oncologist reference contours were compared using the dice similarity index (DSI), Hausdroff distance and variation in the centre of mass (COM). Results: The mean DSI scores for brainstem was good irrespective of the anatomy matching scenarios. The scores for mandible, oral cavity, larynx, parotids, spinal cord, and trachea were unacceptable with poor matching but improved with enhanced bony matching whereas cervical oesophagus and pharyngeal muscles had less than acceptable scores for even perfect matching scenario. HD value and variation in COM decreased with better matching for all the structures. Conclusion: Improved anatomy matching resulted in better segmentation. At least a similar setup can help generate an acceptable set of automatic contours in systems employing single atlas method. Automatic contours from average matching scenario were acceptable for most structures. Importance should be given to head and neck position during atlas generation for a single atlas based system.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.2
• /
• pp.203-244
• /
• 1998

The human mandible is always under the condition of loading by the various forces extorted by the attached muscles. The loading is an important condition of the stomatognathic system. This condition is composed of the direction and amount of forces of the masticatory muscles, which are controlled by the neuromuscular system, and always influenced by the movement of both opening and closing. Mandible is a strong foundation for the teeth or various prostheses, nevetheless it is a elastic body which accompanies deformation by the external forces on it. The elastic properties of the mandible is influenced by the various procedures such as conventional restorative treatments, osseointegrated implant treatments, reconstructive surgical procedures and so forth. Among the treatments the osseointegrated implant has no periodontal ligaments, which exist around the natural teeth to allow physiologic mobility in the alveolar socket. And so around the osseointegrated implant, there is almost no damping effect during the transmission of occlusal stress and displacements. If the osseointegrated implants are connected by the superstructure for the stabilization and effective distribution of occlusal stresses, the elastic properties of mandible is restricted according to the extent of 'splinting' by the superstructure and implants. To investigate the change of elastic behaviour of the mandible which has osseointegrated implant prosthesis of various numbers of implant installment and span of superstructre, a three dimensional finite element model was developed and analyzed with conditions mentioned above. The conclusions are as follows : 1. The displacements are primarily developed at the area of muscle attachment and distributed all around the mandible according to the various properties of bone. 2. The segmentation in the superstructure has few influence on the distribution of stress and displacement. 3. In the load case of ICP, the concentration of tensional stress was observed at the anterior portion of the ramus($9.22E+6N/m^2$) and at the lingual portion of the symphysis menti($8.36E+6N/m^2$). 4. In the load case of INC, the concentration of tensional stress was observed at the anterior portion of the ramus($9.90E+6N/m^2$) and the concentration of tensional stress was observed at the lingual portion of the symphysis menti($2.38E+6N/m^2$)). 5. In the load case of UTCP, the relatively high concentration of tensional stress($3.66E+7N/m^2$) was observed at the internal surface of the condylar neck.

• Journal of International Society for Simulation Surgery
• /
• v.2 no.2
• /
• pp.90-93
• /
• 2015

The fibula free flap has now become the most reliable and frequently used option for mandible reconstruction. Recently, three dimensional images and printing technologies are applied to mandibular reconstruction. We introduce our recent experience of mandibular reconstruction using three dimensionally planned fibula free flap in a patient with gunshot injury. The defect was virtually reconstructed with three-dimensional image. Because bone fragments are dislocated from original position, relocation was necessary. Fragments are virtually relocated to original position using mirror image of unaffected right side of the mandible. A medical rapid prototyping (MRP) model and cutting guide was made with 3D printer. Titanium reconstruction plate was adapted to the MRP model manually. 7 cm-sized fibula bone flap was designed on left lower leg. After dissection, proximal and distal margin of fibula flap was osteotomized by using three dimensional cutting guide. Segmentation was also done as planned. The fibula bone flap was attached to the inner side of the prebent reconstruction plate and fixed with screws. Postoperative evaluation was done by comparison between preoperative planning and surgical outcome. Although dislocated condyle is still not in ideal position, we can see that reconstruction was done as planned.

• Fisheries and Aquatic Sciences
• /
• v.2 no.2
• /
• pp.129-134
• /
• 1999

Haloptilus caribbeanensis Park, 1970 (Copepoda, Calanoida, Augaptilidae) is redescribed in detail on the basis of an adult female collected from Suruga Bay, Japan. This is the first record of the species from the Indo-Pacific region. Morphology of the Pacific specimen agrees well with that of the Caribbean Sea and Gulf of Mexico specimens, except for the numbers of mandibular teeth. The former has five teeth and the latter six teeth on mandible. The segmentation and segmental aesthetasc numbers of female antennules of H. caribbeanensis are compared with those of five species of Haloptilus (H. angusticeps, H. fons, H. longicomis, H. ornatus and H. spiniceps). These characters show morphological differentiation at the species level. H. caribbeanensis has no aesthetasc on the proximal segments II, IV, and VI of the female antennules.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.1
• /
• pp.36-42
• /
• 2009

We have developed software for converting the volumetric voxel data obtained from X-ray computed tomography(CT) into computer-aided design(CAD) data. The developed software can used for non-destructive testing and evaluation, reverse engineering, and rapid prototyping, etc. The main algorithms employed in the software are image reconstruction, volume rendering, segmentation, and mesh data generation. The feasibility of the developed software is demonstrated with the CT data of human maxilla and mandible bones.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.2
• /
• pp.130-136
• /
• 2005

Bone grafts are widely used in the reconstruction of osseous defects in the oral and maxillofacial region. Autogenous bone grafts are considered the gold standard in grafting of the oral and maxillofacial region, because of its osteoconductive and osteoinductive properties. Mandibular symphysis & ascending ramus bone graft have been used more frequently because of easy surgical access, reduced operative time, and following minimal morbidity. However, even though the frequent use of the anterior part of ascending ramus and the different regions of mandible, rare of the reports provide information about the quantity of bone available in this donor site. So this study was taken to evaluate & quantify the amount of bone graft material in the anterior ascending ramus regions. This study was made on 36 samples of CT image. In 3D volume image, imaginary osteotomy & segmentation were done and the dimensions and volume of the bone grafts were measured and evaluated. the average volume of the graft materials obtained from the ascending ramus was $3656.83{\pm}108.19mm^3$, and the average dimensions of graft materials were $(33.68{\pm}0.48){\times}(34.92{\pm}0.51){\times}(15.96{\pm}0.27){\times}(9.05{\pm}0.27)mm$.

• The korean journal of orthodontics
• /
• v.35 no.4 s.111
• /
• pp.320-329
• /
• 2005

The three-dimensional (3D) changes of bone, soft tissue and the ratio of soft tissue to bony movement was investigated in 8 skeletal Class III patients treated by mandibular setback surgery. CT scans of each patient at pre- and post-operative states were taken. Each scan was segmented by a threshold value and registered to a universal three-dimensional coordinate system, consisting of an FH plane, a mid-sagittal plane, and a coronal plane defined by PNS. In the study, the grid parallel to the coronal plane was proposed for the comparison of the changes. The bone or soft tissue was intersected by the projected line from each point on the gird. The coordinate values of intersected point were measured and compared between the pre- and post-operative models. The facial surface changes after setback surgery occurred not only in the mandible, but also in the mouth corner region. The soft tissue changes of the mandibular area were measured relatively by the proportional ratios to the bone changes. The ratios at the mid-sagittal plane were $77\~102\%(p<0.05)$. The ratios at all other sagittal planes had similar patterns to the mid-sagittal plane, but with decreased values. And, the changes in the maxillary region were calculated as a ratio, relative to the movement of a point representing a mandibular movement. When B point was used as a representative point, the ratios were $14\~29\%$, and when Pog was used, the ratios were $17\~37\%(9<0.05)$. In case of the 83rd point of the grid, the ratios were $11\~22\%(p<0.05)$.