• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.2
• /
• pp.177-182
• /
• 2005

Malocclusion can be often found after improper reduction of facial bone fractures, especially by the plastic surgeon or other medical doctor. This causes lots of problem in esthetics, mastication, or facial symmetry. We present four cases which are related above problems. These were well treated by orthognathic surgery or orthodontic treatment.

• The Journal of the Korean dental association
• /
• v.15 no.2
• /
• pp.107-110
• /
• 1977

Class I malocclusion is essentially a dental dysplasia. Rotations, individual tooth malpositions, missing teeth, tooth size discrepancies, etc., fall under this classification. There are two types of class I malocclusions. One is identified by and insufficient denture base to accommodate the teeth; the other has more denture base than tooth material, creating spaces in the arch. The tooth material-to denture base discrepancies may be slight, calling for only a little increase in arch length for alignment and the correction of minor rotations. Discrepancies may also be great, in which case it becomes necessary to reduce tooth material by extraction, so as to make the tooth material more in proportion to the size of the denture base. The author had attempted orthodontic treatment of a class I malocclusion case of 13-year old boy in which high canines and impacted mandibular second premolars were involved. The author obtained good results.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.4
• /
• pp.525-533
• /
• 2018

Objectives: This retrospective study evaluated the changes in the airway width after the orthognathic surgery associated with the skeletal Class III malocclusion. Methods: The lateral cephalograms of 30 adult patients were taken before and immediately after the operation, and after the orthodontic treatment. The angles and distances of them were measured and compared. Results: Before the surgery, the mean value of mandibular (S-B) setback was 9.66 mm, and moved by 1.56 mm anteriorly after the orthodontic treatment. The ANB increased by 5.42 degrees, since then it decreased by 0.68 degree. The hyoid bone (S-APH) moved by 5.05 mm posteriorly, but then moved by 2.26 mm anteriorly. The soft tissue width of laryngeal pharynx (apw2-ppw2) was narrowed by 1.04 mm, and decreased by additional 0.83 mm after the orthodontic treatment. Conclusions: As the mandible was moved back, the location of hyoid bone and laryngeal pharynx were moved backward.

• Journal of Oral Medicine and Pain
• /
• v.43 no.4
• /
• pp.142-146
• /
• 2018

Patients with temporomandibular disorder often present with acute occlusal change and properly managed with conservative treatment. If such change is caused by unusual etiology, differential diagnosis may be challenged. This article describes the diagnosis of a patient exhibiting pain and acute posterior open bite on the ipsilateral side after chewing hard food. After initial conservative treatment failed to resolve the complaint, magnetic resonance imaging was ordered and confirmed partial perforation of articular disc. Disc perforation itself is usually chronic in nature, but sudden macrotrauma may also cause the disorder. However, occlusal discrepancy caused by disc perforation is rare and seldom reported. We present a case of acute malocclusion caused by disc perforation with a review of related literature.

• The Journal of the Korean dental association
• /
• v.57 no.6
• /
• pp.344-351
• /
• 2019

Skeletal Class III malocclusion is a relatively common form of malocclusion in Korea. In borderline cases where only mild skeletal discrepancy exists and if worsening of the facial profile is expected as a result of premolar extraction, mandibular full arch distalization with miniscrews is the treatment of choice. The purpose of this study was to investigate the pattern of tooth movement and evaluate the stability of mandibular full arch distalization and to identify correlation between stability and factors such as initial skeletal pattern, dental changes during treatment and alveolar bone in symphysis region using lateral cephalograms.

• The korean journal of orthodontics
• /
• v.32 no.4 s.93
• /
• pp.241-255
• /
• 2002

This study was performed to evaluate horizontal and vertical characteristics according to lateral cephalometry of adult Korean skeletal Class II patients using a selected horizontal and vortical reference planes of Koreans. 60 males and 60 females consisting of freshman of Yonsei University from 1996 to 1997 and patients with history of orthognatic surgery at the Dental Hospital of Yonsei University with a skeletal Class II profile were chosen and compared with 70 males and 70 females with normal occlusion. The skeletal Class R group had the following conditions : 1. Profile composed of a retrognathic mandible or protrusive maxilla; 2. Class II molar and canine key; 3. ANB-greater than $4^{\circ}; 4$. Wits appraisal-greater than 1.0mm; Cephalometric analysis consisted of 22 skeletal, 25 soft tissue, 12 dental measurements. The results were as follows. 1. There was no considerable vortical measurement difference between the skeletal Class II malocclusion group and the normal occlusion group in skeletal analysis. But, some variations were found between the two groups in soft tissue analysis. 2. Mandibular length of the skeletal Class II malocclusion group was smaller than that of the normal occlusion group. Mandible was more posteriorly positioned in the Class II malocclusion group than in the normal occlusion group. 3. The length and antero-posterior position of the maxilla were not different between the Class II malocclusion and the normal occlusion group. 4. The antero-posterior position of the nose, upper lip and maxillary soft tissue, and nasolabial angle were not different between the two groups. 5. Mandibular soft tissue of the Class H malocclusion group was more posteriorly positioned than that of the normal. 6. The vertical measurements of the incisors(U1-HP, L1-HP) were bigger in the Class II malocclusion group than in the normal, but those of the molars(U6-HP, U6-MP) showed no significant difference between the two groups. 7 Classifying the skeletal Class II malocclusion group according to the antero-posterior position of both jaws, normally positioned maxilla and retruded mandible was 43.3%, both normally positioned maxilla and mandible 28.3%, both retruded maxilla and mandible 20.0%..

• The korean journal of orthodontics
• /
• v.26 no.3
• /
• pp.255-265
• /
• 1996

The purpose of this study was to investigate if there were a significant difference between cephalometric measurements of mandibular position derived from a centric occlusion tracing compared to those of a converted centric relation tracing in the Class III malocclusion. The sample consisted of 25 Class III malocclusion and 25 normal occlusion persons who had no orthodontic treatment. The records included an lateral cephalometrics in centric occlusion, centric relation and centric occlusion bite registration and diagnostic casts mounted on the SAM II articulator in CR. The amount of CR-CO discrepancy of condyle was recorded using a MPI(Mandibular Position Indicator, MPI $200^{(R)}$, Great Lakes Orthodontics, USA). The conversion of the CO cephalogram to CR using the MPI readings was performed on the Conversion work sheet. Measures of mandibular position were chosen for the purpose of this study. The comparison of the difference between CO and CR cephalometric measurements in the normal occlusion and Class III malocclusion group were studied. The results were as follows: 1. In the features of CR-CO discrepancy of the condyle, the condyle was displaced posterior and inferior when the teeth were in centric occlusion. The horizontal component(${\Delta}X$) in Class HI malocclusion group was greater than the vertical component(${\Delta}Z$) and also greater than the horizontal component(${\Delta}X$) in normal occlusion group. There was no statistically significant correlation between MPI measurements and the groups of normal occlusion and Class III malocclusion group. 2. In the comparison of the cephalometric measurements in each group, Normal occlusion group showed significant difference in measurements such as ANB, Facial angle, Facial convexity and ODI. Class HI malocclusion group showed significant difference in measurements such as ANB, Facial angle, Facial convexity, ODI, SNB, APDI, L1-FP and it had more significance than the normal occlusion group. 3. The Value of cephalometric measurements was significantly different between CO and CR but there were no differences between the groups of normal occlusion and Class III malocclusion. The results of this study suggest that if the discrepancies are greater than the amount of normal displacement from clinically captured centric relation, centric relation should be considered as the starting point for proper diagnosis and treatment planning.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.3
• /
• pp.207-217
• /
• 2014

The purpose of the present study was to evaluate the relationship between the malocclusion and dental caries in adolescents with permanent dentition. The subjects of the study were 385 adolescents aged 12 to 15 years. Dental Aesthetic Index (DAI) and DMFT index were recorded as clinical indicators of malocclusion and dental caries. The mean Dental Aesthetic Index (DAI) score of the subjects was 12.42 and the mean DMFT index of the subjects was 2.89. Four students (1.04%) were included in the group of orthodontic treatment mandatory, which signifies the handicapping malocclusion. Moreover, the result of gender-specific analysis of the DAI components observed that the prevalence of midline diastema and mandibular overjet were significantly higher among boys (p < 0.05). In 7 components (missing teeth, incisal segment crowding, maxillary anterior irregularity, mandibular anterior irregularity, mandibular overjet, anterior openbite, antero-posterior molar relationship) among the 10 DAI components, abnormal groups showed significantly higher DMFT index than normal groups (p < 0.05). The subjects in the group of definite to handicapping malocclusion (DAI ${\geq}$ 26) showed significantly higher DMFT index than the subjects in the group of minor or no malocclusion (p < 0.01). In addition, the DAI score had significant positive linear correlation with the DMFT index (r = 0.584, p < 0.01). Consequently, the current findings suggested a positive relationship between the malocclusion and caries prevalence. And several specific types of malocclusion were supposed to be significantly correlated with dental caries.

• The korean journal of orthodontics
• /
• v.22 no.3 s.38
• /
• pp.735-753
• /
• 1992

The purpose of this study was to analyze the positions of upper and lower incisors according to facioskeletal patterns. The lateral cephalometric radiographs of sixty persons with normal occlusion, forty persons with Class II Division 1 malocclusion, and forty persons with Class III malocclusion all above the age of 18, were analyzed. The following results were obtained. 1. C I angle, the measurement related to masticatory system, were $89.20{\pm}4.34^{\circ}$ in normal occlusion group, $81.68{\pm}士5.95^{\circ}$ in Class II Division 1 malocclusion group and $101.96{\pm}6.31^{\circ}$ in Class III malocclusion group. 2. In comparison with the positions of upper and lower incisors according to facioskeletal patterns, Class II Division 1 malocclusion group showed that upper incisors were different significantly in all measurements and inclined labially (P < 0.05). Lower incisors were different significantly in all measurements except LI-APog, LI-APog (mm), LI-AB, LI-AB (mm) and inclined labially (P < 0.05), Class III malocclusion group showed that upper incisors were different significantly in all measurements except UI-SN, UI-OP, and inclined labially (P < 0.05). Lower incisors were different significantly in all measurements and inclined lingually (P < 0.05). 3. In all facioakeletal patterns, LI-SN and LI-PH ware correlated moderately to facioskeletal measurements, and FMA was correlated moderately to measurements of lower incisor position. 4. Regardless of the facioskeletal patterns, the reference planes equally applicable were AB line in the measurements of upper incisor and APog line in the measurements of lower incisor.

• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.41-49
• /
• 2003

This study examined the relations between degree of posterior dental compensation and skeletal discrepancy in Class III malocclusion. The pretreatment lateral cephalogras and dental casts of 87 skeletal Class III adults were selected to provide a random sampling of skeletal Class III malocclusion. Skeletal discrepancy was described with ANB angle, Wits appraisal, SN-Mn plane angle, FMA and ratios of basal arch width. Degree of posterior dental compensation was described with maxillary intermolar angle, mandibular interolar angle and sum of intermoloar angle. The relationships between skeletal discrepancy and degree of posterior dental compensation were analyzed with simple correlation analysis, stepwise multiple regression analysis. The results were as follows 1. A strong association was found between the variation in the anteroposterior measure, ANB angle and the variation of posterior dental compensation measures, sum of intermolar angle and mandibular intermolar angle in skeletal Class III malocclusion. 2. There was no statistically significant relationship between the variation in the vertical measures and the variation of posterior dental compensation measures in skeletal Class III malocclusion. 3. There was no statistically significant relationship between the variation in the anteroposterior and vortical measures and degree of basal arch width discrepancy.