• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.2
• /
• pp.1-13
• /
• 2022

Agrivoltaic facility is the composite system that the solar panel is installed above the farmland, and it enables crop and electricity production simultaneously. Solar panels of the agrivoltaic facilities can block and reduce the amount of solar irradiance arriving at the farmland, but it can help the crop growth by preventing excessive solar irradiance. Therefore, to clarify how the agrivoltaic facilities affect the crop growth, precise solar irradiance distribution under the solar panel should be modeled. In this study, PAR (photosynthetically active radiation), radiation from 400 to 700 nm, which crops usually use to grow, was extracted from the total irradiance and its distribution model under various conditions was developed. Monthly irradiance distributions varied because the elevation of the sun was changed over time, which made the position changed that the local maximum and minimum irradiance appear. The higher panel height did not cause any significant difference in the amount of irradiance reaching below the solar panel, but its distribution became more uniform. Furthermore, the panel angles with the most irradiance arriving below the solar panel were different by month, but its difference was up to 2%p between the irradiance with 30° angle which is usually recommended in Korea. Finally, the interval between panels was adjusted; when the ratio of the length of the panel to the empty space was 1:2, the irradiance of 0.719 times was reached compared to when there was no panel, 0.579 times for 1:1 and 0.442 times for 2:1.

• Spatial Information Research
• /
• v.2 no.1
• /
• pp.27-38
• /
• 1994

Due to the rapid civilization, the need for social facilities is increasing. When these facilities controlled by the integrated facility management system (GIS), various adverse situations such as emergencies, inconvenience of the public and duplication of construction cost can be improved. In this study, the types of information for GIS which may be needed by the facility management agencies are investigated and analyzed. Based on this information, major components for the integrated facility management system including standard format of digital map, basemap scales, and basemap management methods are established.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.3
• /
• pp.15-22
• /
• 2018

This study refers to the composting of DDM Environmental Resource Center, which is operating abnormally in the food waste public-resource facilities that are operating nationwide, in accordance with the initial operating conditions. Similar process cases were investigated to examine issues concerning unusual composting facilities in DDM environmental resource centers and to analyse the causes of the issues. In addition, several improvement measures and alternatives for converting abnormal driving facilities into normal driving facilities may be proposed, and major abnormal driver provisions that are highlighted as issues during field application may be resolved.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.1 s.22
• /
• pp.30-35
• /
• 2004

The HANARO, a multi-purpose research reactor of 30 MWth open-tank-in-pool type, has been under normal operation since its initial criticality in February, 1995. Many experiments should be safely performed to activate the utilization of the HANARO. HANARO flow simulation facility is being developed for the endurance test of reactivity control units for extended life time and the verification of structural integrity of those experimental equipments prior to loading in the HANARO. This facility is composed of three major parts; a half-core structure assembly, a flow circulation system and a support system. The flow circulation system is composed of a circulation pump, a core flow piping, a core bypass flow piping and instruments. The system is to be filled with de-mineralized water and the flow should be met the design requirements to simulate a similar flow characteristics in the core channel of the half-core structure assembly to the HANARO. This paper, therefore, presents an analytical analysis to study the flow behavior of the system. Computational flow analysis has been performed for the verification of system pressure variation through the three-dimensional analysis program with the standard $k-{\epsilon}$ turbulence model and for the verification of the structural piping integrity through the finite element method. According to the analysis results, it could be said that the design requirements and the structural piping integrity of the flow circulation system are satisfied.

• Journal of the Korean housing association
• /
• v.21 no.4
• /
• pp.111-120
• /
• 2010

This study examines the effectiveness of a new community facility operation and management system that were implemented by one of the major construction companies. This system was an unprecedented approach in a sense that it provided not only necessary facilities but also a specialized management staff, an operational manual, and a subsidy for various programs. According to POE conducted among the residents, it can be concluded that the residents' satisfaction will be increased under the following conditions; 1) when a program manual associated with the community facility is provided, 2) when there is a professional staff who can coordinate various programs effectively, 3) when the facilities are well designed in accordance with the program requirements, 4) when the users adhere to regulations and management standards, 5) when all three components- i.e. facility, people and programs- are well coordinated, and 6) when affordable user fees are charged. This research assures that professional management staff and well-planned management system play a significant role in the enhancement of the residents' satisfaction as well as vitalizations of the community.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.1
• /
• pp.181-189
• /
• 2017

The systematic management of technology infrastructure increasingly becomes critical as it represents the driving power for creating competitive advantage of nations and enterprises. In this sense, public facility and equipment, which is one major asset of technology infrastructure, should be managed effectively, systematically and efficiently to increase its overall equipment effectiveness. However, the manual and off-line communication was the unique way to communicate between the suppliers who provide facilities in the public sector and the customers who utilize the facilities in the industrial sector. This communication way caused invisibility of available usage time and increase of idle time, thereby decreasing the equipment effectiveness. This paper presents an web-based scheduling system that enables real-time collaboration and information sharing for increasing the equipment effectiveness. The designed system performs scheduling, facility management, order management and customer relationship management in an on-line platform, and carries out the processing and storing of relevant information in an integrated database. The paper includes a development approach to identify business process models and standardized system models by using object-modeling technique. The deliverable of the present work will contribute to increasing the equipment effectiveness by enhancing visibility, transparency and predictability by means of the integration with a legacy Enterprise Resource Planning.

• Journal of Digital Convergence
• /
• v.19 no.4
• /
• pp.19-24
• /
• 2021

In this paper, an index of women's safety facilities was created and visualized using public data related to Seoul. CPTED, the women's safety facilities index was created by collecting and analyzing eight data related to the local women's safety index and five major crime victims of women. As a result of the correlation analysis between the factors of the female safety facility index and the number of female crime victims, three data were selected as the main factors, "CCTV," "street lamps," and "female security guardians", which were found to be meaningful at the 95% level of reliability. The distinction women's safety facility index was calculated by weighting the correlation coefficient between the main factors for calculating the women's safety facility index, and visualized using Python's Follium library.

• Korean journal of food and cookery science
• /
• v.19 no.3
• /
• pp.339-353
• /
• 2003

The rapid increase in food borne illness outbreaks in Korea has been one of the major threats to the Nation's Health. Foodservice establishments have been identified as the major place for these outbreaks, mainly due to the lack of sanitary management and sanitary facility management practices. The purposes of the study were to develop hospital foodservice facility evaluation tools, based on the general HACCP-based standards and guidelines, for hospital food service establishments, to ensure the safety of these foodservices and to reduce the risk of food home illness. The scope of this study included: 1) an assessment of the current foodservice sanitation practices and managements for 6 general hospitals, with more than 400 beds, and 3 general hospitals, with less than 400 beds; 2) the development of foodservice establishments sanitation evaluation tools and sanitation standards, based on the HACCP system. The survey data showed varied results between the hospitals surveyed. Most of the hospital foodservice operations had many problems with ventilation and the plumbing. The total dimensional mean scores for the hospitals with more than 400 beds and less than 400 beds were 31.5 and 27.0, respectively. The highest dimension scores were for the water supply facility and lighting, with the lowest for insect and rodent control and toxic materials management. The levels of the mean scores were very low, especially for the general hospitals with less than 400 beds. These low mean scores may have arisen from critical problems within the hospital foodservice operations. The most needed facility management items for improvement were: storage shelf should be spaced 6 inches from the floor and walls, the use of three compartment sinks, utility sinks and cleaning facilities, with a floor drain for cleaning mops or liquid wastes, a ventilation hood designed to prevent dripping onto food, cooking facilities should be disassembled for washing and sanitizing, a separated hand washing sink and a sanitized food board for each area should be provided, all toxic material must have warning labels attached, and be stored in an area away from food preparation under padlock. The evaluation tool consisted of 14 dimensions, with 65 check-off items. The results of this study will provide basic facilities' guidelines to regulators, or foodservice industry personnel, wishing to build, or expend, and establish an efficient flow of food. As a result, food borne illnesses will be effectively prevented, and the Nation's health will be promoted for the development of their own sanitation standards, with a checklist for the safe production of foods.

• Journal of Radiation Industry
• /
• v.17 no.2
• /
• pp.151-160
• /
• 2023

The International Atomic Energy Agency (IAEA) proposes 11 industries that handle Naturally Occurring Radioactive Material (NORM) that are considered to need management. A water treatment facility is one of the above industries that takes in groundwater and produces drinking water through a water treatment process. Groundwater can accumulate natural radionuclides such as uranium and thorium in raw water by contacting rocks or soil containing natural radionuclides. Therefore, there is a possibility that workers in water treatment facilities will be exposed due to the accumulation of natural radionuclides in the water treatment process. The goal of this study is to evaluate the external radiation dose according to the working type of workers in water treatment facilities. In order to achieve the above goal, the study was conducted by dividing it into 1) analysis of the exposure environment, 2) measurement of the external radiation dose rate 3) evaluation of the external radiation dose. In the stage of analyzing the exposure environment, major processes that are expected to occur significantly were derived. In the measurement stage of the external radiation dose rate, a map of the external radiation dose rate was prepared by measuring the spatial radiation dose rate in major processes. Through this, detailed measurement points were selected considering the movement of workers. In the external radiation dose evaluation stage, the external radiation dose was evaluated based on the previously derived external radiation dose rate and working time. As a result of measuring the external radiation dose rate at the detailed points of water treatment facilities A to C, it was 1.90×10^-1 to 3.75×10⁰ μSv h^-1, and the external radiation dose was analyzed as 3.27×10^-3 to 9.85×10^-2 mSv y^-1. The maximum external radiation dose appeared during the disinfection and cleaning of activated carbon at facility B, and it is judged that natural radionuclides were concentrated in activated carbon. It was found that the external radiation dose of workers in the water treatment facility was less than 1mSv y^-1, which is about 10% of the dose limit for the public. As a result of this study, it was found that the radiological effect of external radiation dose of domestic water treatment facility workers was insignificant. The results are expected to contribute as background data to present optimized safety management measures for domestic NORM industries in the future.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.18 no.2
• /
• pp.94-99
• /
• 2015

Purpose: A mother's working environment is believed to be a major determinant of exclusive breastfeeding (EBF) practice. We aimed to define the influence of a facility dedicated to breastfeeding and a breastfeeding support program at the workplace on breastfeeding practice. Methods: A cross-sectional study was performed in five workplaces. The inclusion criteria were female workers whose last child was between 6 and 36 months old. Observational data were obtained and a questionnaire was filled out. The World Health Organization definition for EBF was used. Results: Data from 186 subjects (74 office workers and 112 factory workers) were collected. Just over half (52%) of the mothers were between 20 and 46 years old, 75.3% had graduated from high school and university, 12.9% had more than two children and 36.0% owned a house. The prevalence of EBF during the last 6 months was 32.3%. A proper dedicated breastfeeding facility was available for 21.5% of the mothers, but only 7.5% had been in contact with a breastfeeding support program. The presence of a dedicated breastfeeding facility increased EBF practice almost threefold, by an odds ratio (OR) of 2.74 and a 95% confidence interval (CI) of 1.34-5.64 (p<0.05). Knowledge of the breastfeeding support program increased EBF practice by almost six times (OR, 5.93; 95% CI, 1.78-19.79) (p<0.05). Conclusion: Our findings suggest that Governments should make it obligatory for employers to offer a breastfeeding support program and a dedicated breastfeeding facility at the workplace as these simple measures significantly increase EBF.