• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.2
• /
• pp.131-143
• /
• 2013

Vibration condition monitoring of low-speed rotational slewing bearings is essential ever since it became necessary for a proper maintenance schedule that replaces the slewing bearings installed in massive machinery in the steel industry, among other applications. So far, acoustic emission(AE) is still the primary technique used for dealing with low-speed bearing cases. Few studies employed vibration analysis because the signal generated as a result of the impact between the rolling element and the natural defect spots at low rotational speeds is generally weak and sometimes buried in noise and other interference frequencies. In order to increase the impact energy, some researchers generate artificial defects with a predetermined length, width, and depth of crack on the inner or outer race surfaces. Consequently, the fault frequency of a particular fault is easy to identify. This paper presents the applications of empirical mode decomposition(EMD) and ensemble empirical mode decomposition(EEMD) for measuring vibration signals slewing bearings running at a low rotational speed of 15 rpm. The natural vibration damage data used in this paper are obtained from a Korean industrial company. In this study, EEMD is used to support and clarify the results of the fast Fourier transform(FFT) in identifying bearing fault frequencies.

• Journal of KIISE
• /
• v.43 no.12
• /
• pp.1428-1436
• /
• 2016

A multipath routing in wireless sensor networks (WSNs) provides advantage such as reliability improvement and load balancing by transmitting data through divided paths. For these reasons, existing multipath routing protocols divide path appropriately or create independent paths efficiently. However, when the sink node moves to avoid hotspot problem or satisfy the requirement of the applications, the existing protocols have to reconstruct multipath or exploit foot-print chaining mechanism. As a result, the existing protocols will shorten the lifetime of a network due to excessive energy consumption, and lose the advantage of multipath routing due to the merging of paths. To solve this problem, we propose a multipath creation and maintenance scheme to support the mobile sink node. The proposed protocol can be used to construct local grid structure with restricted area and exploit grid structure for constructing the multipath. The grid structure can also be extended depending on the movement of the sink node. In addition, the multipath can be partially reconstructed to prevent merging paths. Simulation results show that the proposed protocol is superior to the existing protocols in terms of energy efficiency and packet delivery ratio.

• Journal of the Korean Chemical Society
• /
• v.44 no.4
• /
• pp.350-355
• /
• 2000

The compounds, CaAl$_2$(BO$_3$)$_2$O, SrAl$_2$(BO$_3$)$_2$O and BaAl$_2$(BO$_3$)$_2$O, are good host lattices for highly efficient $Eu^{2+}$ luminescence. The europium emission peaks at 450 nm in $Eu^{2+}$:CaAl$_2$(B0$_3$)$_2$O, 411 nm in $Eu^{2+}$: SrAl$_2$(BO$_3$)$_2$O and 375 nm in $Eu^{2+}$: BaAl$_2$(BO$_3$)$_2$O. The $Eu^{2+}$: CaAl$_2$(BO$_3$)$_2$O Phosphor shows a high output and should be a good maintenance in VUV Xe lamps. It is ideally suited for use in PDP phosphors. The $Eu^{2+}$ ion is interesting because the Stokes shift emission is a strong host dependent. The difference in the Stokes shift is oneimportant factor leadingto a difference in wavelength. If the 5d level of $Eu^{2+}$ ion is lower in energy,according to a decrease in the doping lattice size, then the emission wavelength will be longer and the Stokes shift will be smaller. Therefore, a knowledge of the relationship between the crystal lattice size and the Stokes shift. (orthe energy of the 5d level),is essential for beingable to predict $Eu^{2+}$ emission properties.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.803-810
• /
• 2011

The public interest of global warming and energy shortage is gradually increased, and the related industries also have become interested in developing eco-friendly material and technology. Warm-mix asphalt (WMA) is a result of the developments to alleviate global warming and energy problems. This WMA is produced at lower temperatures than the temperature at which hot mix asphalt (HMA) is produced. Because most tests in Superpave are developed only for the performance and maintenance of HMA produced by hot temperatures, it is difficult for the tests to identify properly the material properties and then evaluate the performances between HMA and WMA. This study deals with the development of a new protocol to differentiate HMA and WMA performance, and especially the interfacial properties between asphalt and aggregate are targeted as the performance indicator; thus, an evaluation method and guideline are suggested. The concept and idea of the test method applied in this study were modified from the DSR moisture damage test protocol. In addition, TSR test was performed to affirm the relation between the asphalt-aggregate interface and the asphalt-aggregate mixture performances. The followings are the results of this study. Shear stress at 85% linear visco-elastic complex modulus (LVE $G^*$) can be a better parameter than LVE $G^*$, which can assess the interfacial or bonding performance between asphalt and aggregate. Moreover, measuring the bonding performance in thinner film thicknesses will be a better way to evaluate the real and field situation between asphalt and aggregate. The interfacial properties' criteria to apply the newly developed test and parameter should be developed, after the asphalt mixture criteria relating to the interfacial properties are completed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.9
• /
• pp.1233-1242
• /
• 2011

The in vivo digestibility of mulberry leaves (Morus alba) and the effects of the partial replacement of cotton seed with fresh mulberry leaf in rations on the performance of growing Vietnamese cattle was investigated. For the in vivo digestibility trial, twenty castrated rams of Phanrang breed (a local prolific breed) with an initial weight of 23-25 kg, were first assigned to four groups according to weight and then randomly assigned to one of four dietary treatments to determine digestibility of nutrients in mulberry leaves (M. alba), natural Bermuda grass (Cynodon dactylon), elephant grass (Pennisetum purpureum) and buffalo grass (Panicum maximum cv. TD 58). All forages were cut and chopped daily before being offered (at 120% maintenance) to the sheep. In the feeding trial, 20 Laisind (Vietnam yellow cows${\times}$Red Sindhy bulls) crossbred bulls averaged 18 month old and 184 kg were used to investigate the effect of partial replacement of cottonseed in the diet by mulberry leaves on live weight gain and feed conversion rate. The experiment was a randomized complete block design with four levels of fresh mulberry leaves which varied from 0 to 15% of total dietary dry mater and five animals per treatment over an 84 day period. The in vivo digestion trial showed the superior quality of mulberry leaves compared with the grasses. Chemical analysis indicated that mulberry leaves had the highest CP and the lowest NDF contents (22.3 and 31.1% DM, respectively) among the four forages tested. Digestibility of DM and OM of the mulberry leaf (66.4 and 71.8%, respectively) was also the highest but that of CP (58.2%) and NDF (58.4%) was the lowest of the four forages evaluated (p<0.05). Consequently, the ME value and therefore net energy (NE) and unit feed for lactation (UFL) values of the mulberry leaves, which was estimated from chemical composition and digestibility values, were the highest among the forages investigated in the present study. Results of the feeding trial showed no treatment effect on average daily gain (ADG) of the cattle. The values were 554, 583, 565 and 568 g/d for animals in the diets of 0, 5, 10, and 15% mulberry leaves inclusion, respectively. Total DM intake of the animal was not affected by the treatment when expressed as kg/animal/d. However, when adjusted for metabolic weight of the animal the DM intake was reduced (p<0.05) as whole cottonseed was replaced by mulberry leaves in the ration. When the level of mulberry leaves in the ration increased from 5 to 15% of dietary DM at the expense of whole cottonseed, CP and ME intakes of the cattle were significantly decreased (p<0.05) and the feed to gain ratio reduced by 8 to 14% as compared with the control diet (p<0.05). Mulberry leaf is a good feed ingredient for ruminants because of its high level of crude protein and high digestibility of nutrients and energy. Mulberry leaves can be efficiently used as a source of protein supplement to replace cottonseed, a more expensive animal feeds ingredient, in the diet for Vietnamese cattle.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.5
• /
• pp.452-460
• /
• 2008

Anti-foaming agents and foam fences have been used to remove the foam at the outfall of power plants, but there are some problems as consumption of maintenance costs and insufficiency of effect. Therefore, development of the methods how to remove the foam by stable coastal structure has been required. In this study, numerical simulation of air entrainment was carried out to design the submerged outlet structure for reducing foam using curtain walls. The air entrainment rate and the discharge of entrained air change according to the shape of weir and curtain wall. Hence, it is necessary to design the optimum section through comparison of each case. The optimum section which has the maximum rate of foam reduction was determined by the simulation results. In addition, it was found that the flow velocity at the submerged outlet is to be smaller than 1 m/s and the submerged depth of curtain wall is to be taller than height of the submerged outlet section.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.5
• /
• pp.255-268
• /
• 2016

Climate change has increased the need to secure a new water resource in addition to the traditional water resources such as surface water and ground water. The seawater desalination market is growing sharply in accordance with this situation in Korea, "seawater engineering & architecture of high efficiency reverse osmosis (SEAHERO)" program was launched in 2007 to keep pace with world market trend. SEAHERO program was completed in 2014, contributed to turn the domestic technology in evaporative desalination technology to RO desalination technology. Currently, it is investigated that the average specific energy consumption of the whole RO plant is around $3.5kWh/m^3$. The Busan Gi-jang plant has shown $3.7{\sim}4.0kWh/m^3$, including operational electricity for plant and maintenance building. Although not world top level, domestic RO technology is considered to be able to compete in desalination market. Separately, many researchers in the world are developing new technologies for energy savings. Various processes, forward osmosis (FO), membrane distillation (MD) process are expected to compete with RO in the future market. In Korea, FO-RO hybrid process, MD and pressure retarded osmosis (PRO) process are under development through the research program in Ministry of Land, Infrastructure and Transport (MOLIT). The desalination technology level is expected to decrease to $2.5kWh/m^3$.

• Journal of Nutrition and Health
• /
• v.34 no.2
• /
• pp.222-229
• /
• 2001

This study describes the application of the stages of change construct to fat intake by examining the associations of the stages of change with nutritional status and beliefs on health behavior. Data were obtained from apparently healthy 596 adults(326 females and 270 males) residing in large cities. Stages of change assessed by an algorithms based on 6 items were designed each subject into one of the 5 stages: precontemplation(PC), contemplation(CO), preparation(PR), action(AC) and maintenance(MA). Beliefs on health behavior were assessed by self efficacy as well as 4 belief scales from the Locus of Illness Control(LIC) developed using factor analysis such as internal disease cure and prevention and external disease cure and prevention. Energy and fat intakes were measured by a 39 item short form food frequency questionnaire. Regarding the 5 stages of change, MA stage comprised the largest group(37.9%), followed by Ac(30.7%), PC(11.4%), CO(10.4%) and PR(9.6%). Subjects who were females, older or healthier were more likely to belong to either AC or MA. Stage assignment of individuals was corroborated by their nutritional variables. Those in PC had the most energy and fat and those in MA ate the least for females. BMI was higher in PR than any other stages for both males and females. Those in PC were distinctive in that they were more externally oriented in terms of health control showing higher scores on external disease prevention(for males) and external disease cure(for females), and lower score on internal disease cure. On the other hand, those in MA received the highest scores on internal disease prevention and self efficacy, which suggested that they were more internally oriented. Canonical discriminant function analysis indicated that the 5 stages were importantly discriminated by BMI, self efficacy, internal disease prevention and external disease prevention for males and by fat intake, self efficacy and external disease cure variables for females. The results of our study confirm differences in stages of change in fat intake in terms of nutritional status and beliefs on heath behavior and indicate the need for taking these phases of change into account in nutrition advice. (Korean J Nutrition 34(2) : 222-229, 2001)

• Nutrition Research and Practice
• /
• v.3 no.3
• /
• pp.247-252
• /
• 2009

The present study was to investigate the nutritional status and factors related to malnutrition in end-stage renal disease (ESRD) patients requiring hemodialysis (HD) in South Korea. Subjects were ESRD outpatients from general hospitals or HD centers in Seoul referred to the dialysis clinic for maintenance HD care. A total of 110 patients (46 men and 64 women; mean ages $58.6{\pm}1.0y$) were eligible for this study. The family history of chronic renal failure (CRF) was considered positive if a patient reported having either a first-degree or second-degree relative with CRF. Malnutrition was defined as a triceps skinfold thickness or mid-ann muscle circumference below the fifth percentile for age and sex and forty-seven of the 110 patients were malnourished. Almost all (94%) patients had anemia (hemoglobin: <13 g/dL for men and <12 g/dL for women). Energy intake was below the recommended intake levels of energy [30-35 kcal/kg ideal body weight (IBW)] and protein (1.2 g/kg IBW) in 60% of patients. The duration of HD was longer in malnourished HD patients (P=0.0095). Malnutrition was more prevalent in women (P=0.0014), those who never smoked (P=0.0007), nondiabetic patients (P=0.0113), and patients with bone diseases (P=0.0427), adequate HD (spKt/$V{\geq}1.2$) (P=0.0178), and those with a family history of CRF (P=0.0255). Multiple logistic regression was used to examine the relationship between malnutrition and potential risk factors. After adjusting for age, sex, and other putative risk factors for malnutrition, the OR for malnutrition was greater in HD patients with a family history of CRF (OR, 3.290; 95% CI, $1.003{sim}10.793$). Active nutrition monitoring is needed to improve the nutritional status of HD patients. A family history of CRF may be an independent risk factor for malnutrition in Korean HD patients. A follow-up study is needed to investigate whether there is a causal relationship between a family history of CRF and malnutrition in Korean ESRD patients.

• Journal of the East Asian Society of Dietary Life
• /
• v.5 no.1
• /
• pp.41-51
• /
• 1995

Bone mass accretion during puberty appears to be critical in the development of peak bone mass. Although bone density of females in Korea has been studied, only a few studies have related bone mass with anthropometric patterns or puberty in the pubescent girls. This study was conducted as part of a study of major determinants of bone development during puberty. Subjects were aged 14∼16 yr(mean 14.97), and had no history of disorders or dedication use likely to influence bone or calcium metabolism. Bone mineral density and content were measured by dual energy X-ray absorptiometry using a Lunar DPX+Scanner (Lunar Madison, WI). Also, total body fat, and total lean body mass were assessed using a Lunar DPX dual-energy X-ray absorptiometer, Pubertal status was assessed according to the Marshall and Tanner guidelines. Serum levels of osteocalcin was measured by RIA using a commercial kit assay. Skinfold measurements were taken with a skinfold caliper(Lange Caliper, USA). Data were analyzed using the regression and GLM procedure of the statistical package SAS. The results indicated that the observed means for lumbar spine BMD and femoral BMD correspond to approximately 91% and 96% of the means for young adult females, respec tively. All subjects were menarchal, with the majority being in the middle to end stages of pubertal development. Total body BMD was positively related to fat mass(P<0.001), lean body mass and time since menarche, and negatively related to urine pyridinoline, serum alkaline phosphatase and osteocalcin. The data indicate that girls who reported lower age for menarche had significantly higher bone densities than girls who reported higher age for menarche. Attaining peak skeletal bone mass during puberty may reduce the incidence of osteoporosis in later life. this finding suggests that early menarche may augment peak bone mass, influencing the extent of bone loss later in adulthood. The results suggest that good nutrition in childhood appears to be needed not for growth and development, but possibly also to assure an optimal peak of bone mass and thus greater latitude for the maintenance or skeletal integrity in the face of bone losses. Troeps skinfold thickness was a better predictor of total BMD and total BMC than was any other skinfold thickness. The study did not find a relationship between total BMD and body fat %, but total fat was significantly positively related to total BMD(r=0.49) and total BMC(r=0.60). It supports earlier report that there was a significant correlation between TBMD and body weight. Conclusively, total fat, lean body mass and pubertal development could influence BMD in pubescent girls. Clearly, longitudinal studies are required to assess the effect of puberty on peak bone mass, and to define further the potential determinants of peak bone mass.