• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.1032-1036
• /
• 2019

When the equipment which is related to safety or important to power production is installed in nuclear power plant units (NPPs), verification of equipment Electromagnetic Susceptibility (EMS) must be performed. The low-frequency radiated magnetic field susceptibility (RS101) test is one of the EMS tests specified in U.S NRC (Nuclear Regulatory Commission) Regulatory Guide (RG) 1.180 revision 1. The RS101 test verifies the ability of equipment installed in close proximity to sources of large radiated magnetic fields to withstand them. However, RG 1.180 revision 1 allows for an exemption of the low-frequency radiated magnetic susceptibility (RS101) test if the safety-related equipment will not be installed in areas with strong sources of magnetic fields. There is no specific exemption criterion in RG 1.180 revision 1. EPRI TR-102323 revision 4 specifically provides a guide that the low-frequency radiated magnetic field susceptibility (RS101) test can be conservatively exempted for equipment installed at least 1 m away from the sources of large magnetic fields (>300 A/m). But there is no exemption criterion for equipment installed within 1 m of the sources of smaller magnetic fields (<300 A/m). Since some types of equipment radiating magnetic flux are often installed near safety related equipment in an electrical equipment room (EER) and main control room (MCR), the RS101 test exemption criterion needs to be reasonably defined for the cases of installation within 1 m. There is also insufficient data regarding the strength of magnetic fields that can be used in NPPs. In order to ensure confidence in the RS101 test exemption criterion, we measured the strength of low-frequency radiated magnetic fields by distance. This study is expected to provide an insight into the RS101 test exemption criterion that meets the RG 1.180 revision 1. It also provides a margin analysis that can be used to mitigate the influence of low-frequency radiated magnetic field sources in NPPs.

• Journal of Electrical Engineering and Technology
• /
• 제1권3호
• /
• pp.359-365
• /
• 2006

Since the start of the KSTAR (Korea Superconducting Tokamak Advanced Research) project, Instrumentation and Control (I&C) of the Neutral Beam Test Facility (NB-TF) has been striving to answer diverse requests arising from various facets during the project's development and construction phases. Hard-wired electrical circuits have been designed, tested, fabricated, and finally installed to the relevant parts of the system. In relation to the vacuum system I&C, controlling functions for the rotary pumps, a Roots pump, two turbomolecular pumps, and four cryosorption pumps have been constructed. I&C for the ion source operation are the temperature and flow rate signal monitoring, Langmuir probe signal measurements, gradient grid current measurements, and arc detector circuit. For the huge power system to be monitored or safely operated, many temperature measurement functions have also been implemented for the beam line components like the neutralizer, bending magnet, ion dump, and calorimeter. Nearly all of the control and probe signals between the NB test stand and the control room were made to be transmitted through the optical cables. Failures of coolant flow or beam line vacuum pressure were made to be safely blocked from influencing the system by an appropriate interlock circuit that will shut down the extraction voltage application to the system or prevent damages to the vacuum components. Preliminary estimation of the beam power through the calorimetric measurement shows that 87.9% of the total power of the 60kV/18A beam with 200 seconds duration is absorbed by the calorimeter surface. Most of these I&C results would be highly appropriate for the construction of the main NBI facility for the KSTAR national fusion research project.

• 농업과학연구
• /
• 제40권4호
• /
• pp.395-403
• /
• 2013

Plant factory has drawn attention in many countries in the world due to capability of environmental control not only for better yield and quality, but also for increase in functional and medicinal components of the products. In this paper, an experimental plant factory was constructed for various tests under different environmental conditions, and the operations were evaluated. A production room was constructed with adiabatic materials with dimensions of $6,900{\times}3,000{\times}2,500$ mm ($L{\times}W{\times}H$). Four sets of $2,890{\times}600{\times}2,320$ mm ($L{\times}W{\times}H$) production frame unit, each with 9 light-installed beds and an aeroponic fertigation system, resulting in 36 beds, were prepared. Accuracy and response were evaluated for each environmental control component with and without crops. Air temperature, humidity, $CO_2$ concentration, light intensity, frequency, and duty ratio, fertigation rate and scheduling were controllable from a main control computer through wireless communication devices. When the plant factory was operated without crop condition, the response times were 8 minutes for change in temperature from 20 to $15^{\circ}C$ and 20 minutes from 15 to $20^{\circ}C$; 7 minutes for change in humidity from 40 to 65%; and 4 minutes for change in $CO_2$ concentration from 450 to 1000 ppm. When operated for 24 hours with crop cultivation; average, maximum, and minimum values of temperatures were 20.06, 20.8, and $18.8^{\circ}C$; humidity were 66.72, 69.37, and 63.73%; $CO_2$ concentrations were 1017, 1168, and 911 ppm, respectively. Photosynthetic Photon Flux Density was increased as the distance from the light source decreased, but variability was greater at shorter distances. Results of the study would provide useful information for efficient application of the plant factory and to investigate the optimum environment for crop growth through various experiments.

• 보건교육건강증진학회지
• /
• 제22권4호
• /
• pp.57-72
• /
• 2005

Objectives: To investigate the status of health education in elementary schools. Methods: 620 school nurses were surveyed by questionnaires from September to December in 2003. Results: 1) Among the school nurses under inquiry of planning of health education, 3.3% and 9.3% of them did not prepare for teaching plan. 2) The average time for health education by a school nurse was 96.8 hours a year, and handouts for health education were distributed 10.6 times. Among the contents of health education, sex education took the largest portion of health education with 24.6 hours a year. 3) With regard to the contents of health education covered by school nurses, sex education ranked first with 90.2%, next came drug abuse with 78.4%, dental health, CDC, disease control, healthy life and smoking, body structure and function and growth and development safety, alcohol, nutrition and environmental health followed them. 4) The main contents of education were CDC, dental health sex, healthy life and disease control for 1st, 2nd and 3rd grade students, sex, CDC, disease control and safety for 4th grade students, and sex, CDC, drug abuse and smoking for 5th and 6th grade students. 5) 72.6% of school nurses used class room for health education, 20.0% and 7.4% of them used grade and others such as broadcast, respectively. 6) 42.1% of school nurses used blackboard, 37.0% and 18.6% of them used visual media and handout as a teaching aids for health education. 7) 31.6% of school nurses replied that education time was insufficient 9.5% and 15.9% of them replied the contents of health education were inadequate and methods of health education were inappropriate, respectively. Conclusions: For the successful school health education, it would be in need of sufficient time for health education by opening health education course and of modify the various working conditions of school nurses, and those of effective educational materials and media for health education.

• 지역사회간호학회지
• /
• 제17권4호
• /
• pp.482-491
• /
• 2006

Purpose: Hemiplegia patients who were attacked by a stroke suffer from hemiplegic disabilities as well as motor disabilities. For them, rehabilitation cure is being carried out broadly. However, it is not enough for them to use the upper extremity than the lower extremity. For the use of the upper extremity, we examined the effect of constraint-induced movement therapy developed in this research on patients who experienced a stroke following hemiplegia. Method: For this study we selected 36 stroke patients who were registered at the community health center through accidental sampling, and assigned 21 of them to the experimental group, and 15 to the control group. The experimental group had constraint-induced movement therapy for 5 days and 7 hours a day from 9 to o'clock in the morning 9 to 4 o'clock in the afternoon 4 including warmup exercise and main exercise in the rehabilitation room, whereas the control group were restricted. Result: As a result of constraint-induced movement therapy, affected side elbow joint flexion range, side shoulder joint extension range and side shoulder joint of the flexion range of motions increased obviously in the experimental group compared to those in the control group. Conclusion: The result above clearly shows that constraint-induced movement therapy is an effective intervention for the rehabilitation of hemiplegia patients in increasing affected side elbow joint of the flexion range of motion, the shoulder joint extension, and the increase of flexion range of motion.

• 제어로봇시스템학회논문지
• /
• 제4권3호
• /
• pp.392-399
• /
• 1998

A full-scope replica type simulator whose MCR(main control room) has the same features and operation functions as MCR of the reference power plant has been developed for a fossil power plant. This simulator was developed with the model of Poryung Fossil Power Plant #3,4 which is the standard model of the Korean fossil power plant. It is the first localized simulator for the supercritical, variable boiler pressure type fossil power plant. The simulator provides various kinds of accidents which are in normal plant operation and thus enables operators to recover or reduce possible damages. To design and develop this kind of simulator, we need to integrate high technologies such as system analysis, plant operation and system integration of mechanics, physics, computer science. CASE(Computer Aided Software Engineering) tools were used to develop the dynamic model. This simulator will greatly contribute to the improvement of the safety and efficiency of the fossil power plant by implementing operator training. In this paper, the outline of software and hardware configuration and characteristics of the simulator are described, and the results of 30%, 50%, 75%, 100% load operation test will be discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.111-114
• /
• 1999

Electroluminescence(EL) devices based on organic thin films have been attracted lots of interests in large-area light-emitting display. In this stuffy, an emissive layer was fabricated using Langmuir-Blodgett(LB) technique in organic light-emitting (OLEDs). This emissive organic material was synthesized and named PECCP[poly(3.6-N-2-ethylhexyl carbazolyl cyanoterephthalidene)] which has a strong electron donor group and an electron acceptor group in main chain repeated unit. This material has good solubility in common organic solvents such as chloroform. THF, etc, and has a good stability in air. The Langmuir-Blodgett(LB) technique has the advantage of precise control of the thickness down to the molecular scale, In particular, by varying the film thickness it is possible to investigate the metal/polymer interface. Optimum conditions for the LB film deposition are usually determined by investigating a relationship between a surface pressure $\pi$ and an effective are A occupied by one molecule on the subphase. The LB films were deposited on an indium-tin-oxide(ITO) glass at a surface pressure of 10 mN/m and dipping speed of 12 mm/min after spreading PECCP solution on distilled water surphase at room temperature, Cell structure was ITO/PECCP LB film/Alq$_3$/Al. We considered PECCP as a hole -transport layer inserted between the emissive layer and ITO. We also used Alq$_3$ as an emissive layer and an electron transport layer. We measured current-voltage(I-V) characteristics, UV/visible absorption, PL spectrum and EL spectrum of the OLEDs.

• Journal of Forest and Environmental Science
• /
• 제35권4호
• /
• pp.223-231
• /
• 2019

Castanopsis indica (Sil Batna) is an ecologically valuable multipurpose indigenous tree species of Bangladesh. Considering its high value but poor natural regeneration due to seed dormancy, the authors conducted an experiment at the Institute of Forestry and Environmental Sciences Chittagong University (IFESCU) during 2012-2013 to find out effective pre-sowing treatments. Ten pre-sowing seed treatments were applied on mature, even-sized seeds namely-control; sandpaper rubbing; nail clipping; immersion in normal water (at room temperature: 24℃) for 24 hrs., 48 hrs. and 72 hrs.; immersion in hot water (80℃) for 1 minute; soaking in 10% dilute H₂SO₄; soaking in 10% HCl for 5 minutes; and sowing in propagator house. Seeds sown after sandpaper rubbing at the distal end revealed best performances by providing highest germination percent (66.7%), germination energy (30%), germination index (0.17), germination rate (0.0145), germination value (30%) and plant percent (66.7%) within shortest period (38 days). The treatment also produced most vigor seedlings with 20.9 cm shoot height, 15 node number, and largest leaves (11.1 cm×2.9 cm). Hence, it is recommended to adopt sandpaper rubbing method for maximum germination and quality seedlings.

• 산업경영시스템학회지
• /
• 제27권1호
• /
• pp.109-120
• /
• 2004

In large scale complex system such as a nuclear power plant, it is important to select guidelines and/or checklist to evaluate the system performance, especially human performance for visual information while the number of evaluation items of the guidelines and checklist is voluminous. This paper presents the methodology and experiment for the relative weights or priority selection of evaluation items on the advanced information display of main control room in a nuclear power plant. To summarize this, 1) many human factors guidelines of Visual Display Terminal(VDT) displays are collected, 2) the collected guidelines are integrated and unified based on some rules in a way to avoid confusion or errors about work performances of operator groups, 3) using the unified guidelines, the more important items are defined when the advanced information indexes are applied by using the Analytic Hierarchy Process(AHP). For employing the AHP, the decisions and response of many human factors evaluation specialists in this field are collected to get the priority order of the evaluation items of VDT. The result of this paper will be applied for the evaluation of the usability of next generation of nuclear power plant which is focused on the visual information display on VDT.

• 한국결정학회지
• /
• 제4권1호
• /
• pp.11-17
• /
• 1993

융액인상법에 의해 코런덤 단결정을 육성하였다. 인상속도, 회전속도, 융액온도 등 결정육성 요소가 결정 의 품질에 미치는 영향을 조사하였다. 양질의 결정을 육성하기 위한 최적 인상속도는 4.0 mm/hr, 회전속도는 30rpm이었다. 코런덤 결정에서 가장 중요한 결합은 기포이었으며, 기포발생을 억제할 수 있는 융액의 온도제어 방법을 논의하였다. 육성된 결정의 성장방위는 (0001)이었으며, 이 방위는 가장 빠른 성장속도를 갖는 것으로 판단되었다. 흡수 스펙트럼 을 측정하여 Cr3+이온의 흡수천 이를 확인하였다.