• Journal of the Mineralogical Society of Korea
• /
• v.1 no.2
• /
• pp.117-130
• /
• 1988

The morphology of the Ca-montmorillonites from the Gampo area was investigated by the use of scanning and transmission electron microscope. These bulk samples show an irregular or rugged surface with well developed cavities and relict outline of original ash material at low magnification by SEM, indicating that montmorillonites are derived from volcanogenic material. Two different types of morphology of montmorillonites by SEM were observed which appear to depend very much on the space available for crystal growth. One is honeycomb structure montmorillonite growing in an open space. The other is the closely packed aggregates of intergrown montmorillonite showing platy particles where available space for the growth is limited. Several different habits of montmorillonite within a single sample can be observed by TEM. The dominant habit observed is the irregularly shaped and foliated aggregates and the platy shaped particles. In general, platy shaped particles are relatively abundant in the samples from Yongdongri compared with those from Jugjeonri area.

• Ocean and Polar Research
• /
• v.38 no.2
• /
• pp.139-148
• /
• 2016

The activity concentrations of $^{210}Po$ and $^{210}Pb$ within phytoplankton-zooplankton-anchovy-mackerel in the coastal water of the Jeju Island were determined to understand their distribution and bio-accumulation along the trophic level. In the surface water, the total activity concentrations of $^{210}Po$ and $^{210}Pb$ were $0.83{\pm}0.004mBq\;kg^{-1}$ and $1.27{\pm}0.03mBq\;kg^{-1}$. And the dissolved activity concentration of $^{210}Po$ and $^{210}Pb$ were $0.75{\pm}0.06mBq\;kg^{-1}$ and $1.22{\pm}0.09mBq\;kg^{-1}$ respectively. In the phytoplankton, the concentration factor (CF) of $^{210}Po$ and $^{210}Pb$ were $1.5{\times}10^5$ and $2.6{\times}10^4$ shows $^{210}Po$ is 5 times higher compared to $^{210}Pb$. The similar CF factor in the zooplankton of $^{210}Po$ was derived as $1.4{\times}10^5$. The CF of $^{210}Po$ in anchovy was increased twice compared to that in plankton. This is the evidence that there is $^{210}Po$ bio-magnification in the trophic level of plankton-anchovy. However the $^{210}Po$ activity concentration in the muscle tissue of mackerel was one-hundred times lower than that in anchovy. This reflects that in the trophic level of anchovy-mackerel, the bio-accumulation of $^{210}Po$ is decreased. The activity concentrations of $^{210}Po$ in the internal organs of anchovy and mackerel were 8 to 38 times higher than those in muscle tissues. In phytoplankton-zooplankton-anchovy, the CF of $^{210}Pb$ was decreased five times along the trophic level in order. In anchovy-mackerel it was decreased by 30-70%.

• Restorative Dentistry and Endodontics
• /
• v.37 no.1
• /
• pp.24-28
• /
• 2012

Objectives: The aim of this study was to test the hypothesis, that the effectiveness of irrigation in removing smear layer in the apical third of root canal system is dependent on the depth of placement of the irrigation needle into the root canal and the enlargement size of the canal. Materials and Methods: Eighty sound human lower incisors were divided into eight groups according to the enlargement size (#25, #30, #35 and #40) and the needle penetration depth (3 mm from working length, WL-3 mm and 9 mm from working length, WL-9 mm). Each canal was enlarged to working length with Profile.06 Rotary Ni-Ti files and irrigated with 5.25% NaOCl. Then, each canal received a final irrigation with 3 mL of 3% EDTA for 4 min, followed by 5 mL of 5.25% NaOCl at different level (WL-3 mm and WL-9 mm) from working length. Each specimen was prepared for the scanning electron microscope (SEM). Photographs of the 3mm area from the apical constriction of each canal with a magnification of ${\times}250$, ${\times}500$, ${\times}1,000$, ${\times}2,500$ were taken for the final evaluation. Results: Removal of smear layer in WL-3 mm group showed a significantly different effect when the canal was enlarged to larger than #30. There was a significant difference in removing apical smear layer between the needle penetration depth of WL-3 mm and WL-9 mm. Conclusions: Removal of smear layer from the apical portion of root canals was effectively accomplished with apical instrumentation to #35/40 06 taper file and 3 mm needle penetration from the working length.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.50
• /
• pp.105-125
• /
• 1999

The results of analysis on foreign exchange market, stock and financial market after January of 1997 are that foreign exchange market will be affected by stock and financial market volatility about 1999. This means that stock and financial market are more stable than foreign exchange market. This also is supported by ‘financial market forecast of 1999 in Daewoo Economic Research Institute’. After won/dollar (end of period) will be increasing in 1,430 at second quarter of 1999, this is to downward 1,200 fourth quarter of 1999. This is somewhat based on government's higher exchange rate policy. But, after yield of corporate bond is to 11.0% at first quarter of 1999, this will be stable to 10.2% at fourth quarter. During the first quarter of 1999, yield of corporate bond is to somewhat increasing through sovereign debt and public bonds, technical adjustment of interest rate. After this, yield of corporate bond will be stable according to stability of price, magnification of money supply, restucturing of firms. So, stock market is favorably affected by stability of financial market. But, the pension and fund of USA, i.e., long-term portfolio investment fund, are injected through international firm's management. It is included by openness of audit, fair market about foreign investors. Finally, Moody's strong rating on the won-denominated bonds suggest that Korea's sovereign debt ratings could be restored to an investment grade in the near future. It sequentially includes inflow of foreign portfolio investment fund, fall of won/dollar foreign exchange rate (appreciation of won) and stability of yield of corporate bond.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.2
• /
• pp.81-85
• /
• 2013

We performed analysis of composition and structure of coating layers by using ED-XRF and TOF-SIMS for some passion topaz of Swarovski which developed recently as new surface treatment of TCF (thermal color fusion) technique. In addition, we compared differences between Ti-coated topaz (Mystic topaz) and new treated colored topazes (passion topaz) with magnification observation and simplified durability test. As a result, we can observe similar characteristic clues in Ti-coated topaz and passion topaz by magnified observation. According to results of depth profile by TOF-SIMS, we can know that topaz is treated by multi-layer coating or surface diffusion coating. Moreover, the passion topaz which is treated by chemical reaction between metal elements shows more stable chemical resistance and higher Mohs' hardness than Ti-coated topaz.

• Clinical and Experimental Reproductive Medicine
• /
• v.27 no.1
• /
• pp.99-105
• /
• 2000

Objective: The objective of this study was to compare results of the macroscopic one-layer vasovasostomy with those of microscopic one-layer vasovasostomy and to analyze the change of semen parameters according to the interval of vasal obstruction. Method and Materials: Between March 1987 and December 1997, we performed 121 vasovasostomies using modified one-layer technique with loupe magnification (macroscopic vasovasostomy) or microscope. Among the 68 could be followed post-operatively, 37 patients were treated by macroscopic technique with loupe, and 31 patients by microscopic technique. We compared rates of anatomical patency (sperm count above than $10{\times}10^{6}$/ml) and pregnancy of macroscopic vasovasotomy with those of microscopic vasovasostomy. Patency and pregnancy rates according to vasal obstructive interval were also examined. Results: The patency rates of macroscopic and microscopic technique were 86.5% and 87.1%, and pregnancy rates of macroscopic and microscopic technique were 64.9% and 67.7%. There was no statistical significance between these two methods (p>0.05). The pregnancy rates and sperm motility were decreased if more than 10 years had elapsed following vasectomy (p<0.05). Conclusion: We found little difference in success rates resulting from macroscopic and microscopic vasovasostomy and the former had the advantage of reduced cost and a lower operator skill level. In post-operative semen analysis, the sperm motility was the most probable factor associated with vasal obstructive interval.

• Imaging Science in Dentistry
• /
• v.33 no.1
• /
• pp.35-41
• /
• 2003

Purpose: To aid in determining the volume of graft bone required before a maxillary sinus lift procedure and compare the alveolar bone height measurements taken by panoramic radiographs to those by CT images. Materials and Methods : Data obtained by both panoramic radiographs and CT examination of 25 patients were used in this study. Maxillary sinus volumes from the antral floor to heights of 5 mm, 10 mm, 15 mm, and 20 mm, were calculated. Alveolar bone height was measured on the panoramic images at each maxillary tooth site and corrected by magnification rate (PBH). Available bone height (ABH) and full bone height (FBH) was measured on reconstructed CT images. PBH was compared with ABH and FBH at the maxillary incisors, canines, premolars, and molars. Results: Volumes of the inferior portion of the sinuses were 0.55 ± 0041 ㎤ for 5 mm lifts, 2.11 ± 0.68 ㎤ for 10 mm, 4.26 ± 1.32 ㎤ for 15 mm, 6.95 ± 2.01 ㎤ for 20 mm. For the alveolar bone measurement, measurements by panoramic images were longer than available bone heights determined by CT images at the incisor and canine areas, and shorter than full bone heights on CT images at incisor, premolar, and molar areas (p<0.001). Conclusion: In bone grafting of the maxillary sinus floor, 0.96 ㎤ or more is required for a 5 mm-lift, 2.79 ㎤ or more for a 10 mm-lift, 5.58 ㎤ or more for a 15 mm-lift, and 8.96 ㎤ or more for a 20 mm-lift. Maxillary implant length determined using panoramic radiograph alone could result in underestimation or overestimation, according to the site involved.

• Structural Engineering and Mechanics
• /
• v.29 no.5
• /
• pp.505-530
• /
• 2008

This paper proposes the application of active multiple tuned mass dampers (AMTMD) for translational and torsional response control of a simplified two-degree-of-freedom (2DOF) structure, able to represent the dynamic characteristics of general asymmetric structures, under the ground acceleration. This 2DOF structure is a generalized 2DOF system of an asymmetric structure with predominant translational and torsional responses under earthquake excitations using the mode reduced-order method. Depending on the ratio of the torsional to the translational eigenfrequency, i.e. the torsional to translational frequency ratio (TTFR), of asymmetric structures, the following three cases can be distinguished: (1) torsionally flexible structures (TTFR < 1.0), (2) torsionally intermediate stiff structures (TTFR = 1.0), and (3) torsionally stiff structures (TTFR > 1.0). The even distribution of the AMTMD within the whole width and half width of the asymmetric structure, thus leading to three cases of installing the AMTMD (referred to as the AMTMD of case 1, AMTMD of case 2, AMTMD of case 3, respectively), is taken into account. In the present study, the criterion for searching the optimum parameters of the AMTMD is defined as the minimization of the minimum values of the maximum translational and torsional displacement dynamic magnification factors (DMF) of an asymmetric structure with the AMTMD. The criterion used for assessing the effectiveness of the AMTMD is selected as the ratio of the minimization of the minimum values of the maximum translational and torsional displacement DMF of the asymmetric structure with the AMTMD to the maximum translational and torsional displacement DMF of the asymmetric structure without the AMTMD. By resorting to these two criteria, a careful examination of the effects of the normalized eccentricity ratio (NER) on the effectiveness and robustness of the AMTMD are carried out in the mitigation of both the translational and torsional responses of the asymmetric structure. Likewise, the effectiveness of a single ATMD with the optimum positions is presented and compared with that of the AMTMD.

• Structural Engineering and Mechanics
• /
• v.66 no.3
• /
• pp.411-421
• /
• 2018

Although a rubber isolation cushion can reduce the dynamic response of a structure itself, it has little influence on the height of a sloshing wave and even may induce magnification action. Vertical baffles are set into a base-isolated Concrete Rectangular Liquid Storage Structure (CRLSS), and baffles are opened as holes to increase the energy dissipation of the damping. Problems of liquid nonlinear motion caused by baffles are described using the Navier-Stokes equation, and the space model of CRLSS is established considering the Fluid-Solid Interaction (FSI) based on the Finite Element Method (FEM). The dynamic response of an isolated CRLSS with various baffles under an earthquake is analyzed, and the results are compared. The results show that when the baffle number is certain, the greater the number of holes in baffles, the worse the damping effects; when a single baffle with holes is set in juxtaposition and double baffles with holes are formed, although some of the dynamic response will slightly increase, the wallboard strain and the height of the sloshing wave evidently decrease. A configuration with fewer holes in the baffles and a greater number of baffles is more helpful to prevent the occurrence of two failure modes: wallboard leakage and excessive sloshing height.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.3
• /
• pp.1-9
• /
• 2011

The purpose of this study is to examine the dynamic characteristics of low, medium and high speed Maglev trains and guideways through dynamic interaction analysis. The coupled dynamic equations of motion for a vehicle of 10-dof and the associated guideway girders are developed by superposing vibration modes of the girder itself. The controller used in the UTM-01 Maglev vehicle is adopted to control the air gap between the bogie and guideway in this study. The effect of roughness, the guideway deflection-ratio and vehicle speed on the dynamic response of the maglev vehicle and guideway are then investigated using the 4th Runge-Kutta method. From the numerical simulation, it is found that the air gap increases with an increase of vehicle speed and the roughness condition. In particular, the dynamic magnification factor of the guideway girder is small at low and medium speeds, but the factor is noticeable at super-high speeds.