• 산업기술연구
• /
• 제21권A호
• /
• pp.257-261
• /
• 2001

The separation of rare earths minerals is very difficult because of their similar chemical properties. The rare earth minerals are used as the mixed rare earth minerals or the misch metal without separation to each element. However, the high purity rare earths are recently produced commercially to each element so they there are used as the materials for high tech. Based on the characterization results for the raw minerals, we have developed a combined process containing gravity seperation, magnetic seperation and flotation. The result obtained from this study is monazite concentration of TREO grade 69.11% and Recovery 56.02%.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.765-769
• /
• 2001

The refuse-derived fuel(RDF) is manufactured using waste plastics-based materials and its physical and chemical properties are analyzed. The manufacturing process consists of hand picking, primary magnetic separation, crushing, secondary magnetic separation, feeding and extrusion. The RDF products have a higher calorie content of over 6, 000 ㎉/kg and high stability because the waste plastics and paper are mainly selected. The combustion flue gas of RDF products is satisfied with the emission criteria of incinerator. The heavy metal concentration of combustion byproduct from the RDF boiler is also satisfied with the criteria and appears to be lower concentration than that of a common municipal waste incinerator.

• 한국자기공명학회논문지
• /
• 제4권2호
• /
• pp.91-102
• /
• 2000

The photoproduced cation radical of N-methylphenothiazine doped in the different kind of matrices of phenyltriethoxysilane (PhiTEOS), vinyltriethoxysilane (VTEOS), and methyloiethoxysilane (METOS) was comparatively studied with electron spin resonance (ESR) and electron nuclear double resonance (ENDOR). The photoinduced charge separation efficiency was determined by integration of ESR spectra which correspond to the amount of photoproduced cation radical in the matrices. This was correlatively studied with the polarity and pore size of the gel matrices. The polarity of the matrices was comparatively determined by measuring λ$\sub$max/ values of PC$_1$ in the different matrices. The relative pore size among the matrices was determined by measuring relative proton matrix ENDOR line widths of the photoproduced cation radical of PCI. The decay kinetic constants of the cation radical of PCI in the different matrices was relatively studied with fitting the biexponential decay curves after exposure into the ambient condition. This is correlatively interpreted with the polarity and pore size of the matrices.

• 한국세라믹학회지
• /
• 제27권6호
• /
• pp.769-776
• /
• 1990

This study deals with the refinement of Hwasun flint clay by grinding, classifying, magnetic separation and acid treatment in sequence. Results are as follows ; 1. Fine kaolinite particles of median size in the range of 4.8 and 1.7$\mu\textrm{m}$ was collected, with the yield of 87.4% by dry grinding and classifying process. 2. It is proven that the iron bearing are of Hwasun flint clay is mainly consisted of chloritoid and iron rich muscovite. 3. As the results of the high gradient magnetic separation, the bleaching and iron removal degree of the dry grinding and classifying sample was 4-58% and 5-62% respectively. 4. As the results of the acid treatment, bleaching and weight loss degree of the dry grinding and classifying sample was reduced to 16-82% and 6-29% respectively.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권3호
• /
• pp.10-13
• /
• 2021

The method of removing micro-plastics from sea water has been developed using electro-magnetic force. Plastics are difficult to decompose and put a great load on the marine environment. Especially a plastic with a size of 5 mm or less is defined as micro-plastic and are carried by ocean currents over long distances, causing global pollution. These are not easily decomposed in the natural environment. The Lorentz force was generated in simulated sea water and its reaction force was applied to the micro-plastic to control their motion. Lorentz force was generated downward and the reaction force to the plastics was upward. The plastic used in the experiment was polystyrene with a diameter of 6 mm, and the density was 1.07 g/cm³. The polystyrene sphere levitated at the current density of 0.83 A/cm² and the external field of 0.87T. The particle trajectory calculation was also made to design separation system using superconducting magnet.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.87-88
• /
• 2022

The use of converter slag as an aggregate for concrete is limited due to the risk of expansion. This study analyzed the substances causing the expansion of converter slag and evaluated the possibility of its use as an aggregate for concrete through separation and selection. As a result of the experiment, it was confirmed that CaO and MgO were concentrated in the slag particles inducing expansion, and it was confirmed that it was possible to separate them from non-expanded particles through magnetic.

• 한국지반환경공학회 논문집
• /
• 제13권12호
• /
• pp.59-66
• /
• 2012

본 연구에서는 철도정비창 부지 내에 폐기물 및 중금속오염 구간에서 채취한 토양을 대상으로 하였다. 그리고 효율적인 정화공정 설계를 위하여 고농도 오염구간, 저농도 오염구간, 폐주물사 함유 시료를 대상으로 입도분포 및 입도 분포 오염농도 분석을 실시하였다. 하지만 폐콘크리트, 폐목재 등의 건설폐기물, 폐주물사, 소각재 등이 부지 전반에 걸쳐 매립되어 있어 일반토양 오염과 다른 양상을 보이고 있었다. 따라서 일반적인 중금속정화기술로는 오염원이 감소하지 않아 혼합된 폐기물 중에 자성을 띠는 성분을 자력선별을 적용하여 실험한 결과 중금속 오염도는 감소하는 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.99-100
• /
• 2015

Significant amount of bottom ash has been produced in the power plant located at southeast region of Korea, but those were abandoned in the pond site without any treatment. In these days, there is a strong move to enforce environmental regulations to protect surrounding nature, a lot of pressure is given to the power plant industry to remove hazardous chemicals from their waste material before landfill or site storage. The overall objective of this research is to separate hazardous chemicals from the bottom ash, and use it safely as sustainable construction material. In this specific study, magnetic separation of bottom ash was applied, and used as a fine aggregates to make mortar specimens. According to the results, it was found that the use of bottom ash decreased 28-day compressive strength. However, using non-magnetic bottom ash provides best results in terms of thermal conductivity, showing strong possibility to be used as heat insulating material.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.113-116
• /
• 2010

The silica coated $Fe_3O_4$ nanoparticles have been synthesized using a micro-emulsion method. The $Fe_3O_4$ nanoparticles with the sizes 6 nm in diameter were synthesized by thermal decomposition method. Hydrophobic $Fe_3O_4$ nanoparticles were coated silica using surfactant and tetraethyl orthosilicated (TEOS) as a $SiO_2$ precursor. Shell thickness of silica coated $Fe_3O_4$ can be controlled (11~20 nm) through our synthetic conditions. The $Fe_3O_4$ and silica coated $Fe_3O_4$ nano powders were characterized by transmission electron microscopy (TEM), x-ray diffraction (XRD) and vortex magnetic separation (VMS).

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.480-489
• /
• 2016

A novel hybrid carrier-based pulse width modulation (CBPWM) scheme that combines unipolar and dipolar modulations is proposed for single-phase three-level rectifiers, which are widely applied in railway traction drive systems. The proposed CBPWM method can satisfy the volt-second balancing principle in the complete modulation index region through overmodulation compensation. The modulation scheme features two modulation modes: unipolar and dipolar. The operation range limits of these modulation modes can be modified by changing the separation coefficient. In comparison with the traditional unipolar CBPWM, the proposed hybrid CBPWM scheme can provide advantageous features, such as lower high-order harmonic distortion of the line current and better utilization of switching frequency. The separation coefficient value is optimized to achieve the maximum utilization of these advantages. The experimental results verify the feasibility and effectiveness of the proposed hybrid CBPWM scheme.