• 대한기계학회논문집B
• /
• 제27권10호
• /
• pp.1385-1392
• /
• 2003

An electromagnetic flowmeter(EMF) was developed and its characteristics were compared with a commercial EMF. The developed EMF was designed as the 100 mm nominal diameter. A signal processing circuit was also developed for generating the magnetic field and converting the flow signal to flowrate and flow quantity. In order to obtain a more stable and reliable flow signal, the double magnetizing frequency was adopted for magnetizing the coil of the EMF. For the characterization of the developed EMF, the uncertainty of calibrator was estimated within $\pm$0.5 %. The evaluation procedure of the uncertainty followed the ISO Guide to the Expression of Uncertainty in Measurement. It was found that the flow signals between the electrodes were about $\pm$60-$\pm$300$\mu$V, which were sufficient for the discrimination of flowmeter and the protection of noise. The test results against the calibrator showed the good linearity in the range of 3 ㎥/h and 70 ㎥/h. A commercialized design of the EMF based on the current study will be technically more competitive in domestic and foreign market.

• 한국군사과학기술학회지
• /
• 제6권4호
• /
• pp.22-28
• /
• 2003

In the conventional weapon system, such as gun and small arms, it Is a general trend that for maximization of its performance and enhancement of its effectiveness, the firing control system(FCS) is developed and applied with the guns and small arms in the world. The FCS of the small arms for infantry man is composed of a few of sensors for acquisition of input data of FCS, such as range measurement, position sensing of weapon, temperature, etc., computer, displayer and power pack, and also the air burst munition is developed in parallel for the maximization of FCS's effectiveness. Since the flight time setting fuze for the air burst munition is adapted for next me, the measuring device of the muzzle velocity is needed to overcome the variation of muzzle velocity due to producing procedures and the differences of the using temperatures and so maintain the burst position accuracy This paper contained the technical information on the development of the measuring device of muzzle velocity, which designed in compact & light weight configuration with reliability and accuracy.

• Progress in Superconductivity
• /
• 제5권1호
• /
• pp.38-44
• /
• 2003

The aim of this study is to confirm clinical usefulness of magnetocardiogram (MCG) by analyzing MCG data of health subjects and patients with Wolff-Parkinson-White (WPW) syndrome and dilated cardiomyopathy (DCM). Measurement of MCG signals was done with a home-made 40-channel SQUID system. MCG signals of 30 healthy subjects were measured as the reference of MCG signals. Among the DCM patients, 7 patients showed abnormal the direction of T wave vector. For a WPW syndrome patient, we measured the MCG signals before and after the surgery. and compared the difference. From the measured magnetic field distribution, current vector map was obtained to show the myocardium current activity. By comparing the MCG signals and current maps, we showed the differences in the analysis results between the healthy subjects and patients with heart diseases.

• 한국철도학회논문집
• /
• 제9권2호
• /
• pp.230-236
• /
• 2006

For a short-term measurement to reduce an accident on a railroad crossing, it is necessary to find out the weakness and problems of existing equipment in the railroad transportation system. The analysis of railroad crossing accidents shows that main causes of accidents (24.9%) are the careless driving including an engine problem, damage on the safety equipment, slide on the snow, and an engine stop on the railroad crossing. Therefore, it is required to install a sensor, or to make a crossing gate at the exist for detecting obstacles on a railroad to prevent collisions among trains. This paper suggests 'a panel sensor using the strain gauge' to make up the weaknesses of the sensing Dead Zone, which are caused by using a laser method, and to detect any small objects passing railroads in order to reduce the errors, which are occurred in the earth magnetic field for controlling Exit Slide Crossing Arm Detector. The device, suggested in this paper, is verified with detecting any small objects passing the railroad, with judging entry decision clearly, and with controlling passing gate and obstruction warnings/cautions obstacles at the same time, through an experimental test.

• 한국전자파학회논문지
• /
• 제20권9호
• /
• pp.989-996
• /
• 2009

전자파전력은 전자파 측정표준 분야의 기본 측정량이며, 관련된 주요 전자파 측정량, 예를 들면 감쇠량, RF 전압, 안테나 특성, 전자기장의 세기 등의 국가 표준을 확립하는데 직접 사용된다. 본 논문에서는 전자파전력 측정에 필요한 전자파전력계와 전력 감지기의 측정 원리를 다룬다. $50\;MHz{\sim}26.5\;GHz$의 주파수 범위에서 동작 하는 전자파전력 국가 표준 원기인 3.5 mm 등축형 미소열량계의 설계, 제작에 있어서의 핵심 사항에 대해서 다루고, 미소열량계를 중심으로 구성된 전력 측정 시스템의 구조 및 동작 원리를 고찰한다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권12호
• /
• pp.732-738
• /
• 2004

In this paper, we constructed 13 turns pancake coil and solenoid coil with HTS tape and measured AC losses of the pancake coil. The critical current of the pancake coil and the solenoid coil were 80A and 109A, respectively. To compare measured AC losses of the two coils, we carried out numerical analysis using 2-D FEM program for manufactured coils. This paper presents current density distribution, flux density distribution and AC losses of the pancake coil and the solenoid. As a result, we obtained that current density distribution was closely related to the orientation of magnetic field and distribution of AC losses were also closely related to the perpendicular component of flux density distribution in coil. The calculated AC losses of the two coils showed good agreement with measured AC losses and AC losses of the pancake coil was about 9 times bigger than that of the solenoid coil under the same turns and length.

• 한국광학회지
• /
• 제7권1호
• /
• pp.37-43
• /
• 1996

횡자장하에서 Zeeman 안정화된 He-Ne 레이저를 광원으로 한 두 종류의 공기굴절율 측정용 간섭계를 설계.제작하였다. 제작된 간섭계는 레이저 광속이 진공조와 기체조를 2번 혹은 4변 지나도록 설계하여 분해능을 향상시켰으며 그 경로가 진공조를 중심으로 대칭적으로 지나도록 설계하여 열적인 변형 및 기계적인 진동에 강한 특성을 갖도록 하였다. 진공조와 기체조 사이의 광로차를 위상각 검출 방식의 heterodyne 간섭계로 측정하므로써 homodyne 간섭계에서 발생되는 간섭무늬 해석 오차를 최소화시켜 공기굴절율 측정의 정확도를 향상시켰다. 제작된 두 굴절율계를 이용하여 여러 조건에서 공기굴절율을 측정한 결과 평균값에서의 상호 편차는 $2\times10^{-8}$ 이하였으며 Edlen공식을 이용한 굴절율계와의 편차는 $1\times10^{-7}$ 이하였다.

• Progress in Superconductivity
• /
• 제12권1호
• /
• pp.41-45
• /
• 2010

Low temperature micro-calorimeters have been employed in the field of high resolution alpha spectrometers. These alpha detectors typically consist of a superconducting or metal absorber and a temperature sensor. The temperature sensor can be a transition edge sensor (TES), a metallic magnetic calorimeter (MMC) or other low temperature detectors for an accurate measurement of temperature change due to an alpha particle absorption. We report a recent study of the heat flow between a replaceable absorber and a temperature sensor. A piece of gold foil in $2.4{\times}2.7{\times}0.03\;mm^3$ is used as an absorber. A $40\;{\mu}m$ diameter Au:Er paramagnetic sensor is attached to another small piece of gold foil in $400{\times}200{\times}30\;{\mu}m^3$ to serve as the temperature sensor. This sensor assembly, Au:Er and gold foil, is placed on a miniature SQUID susceptometer in a gradiometric configuration. The thermal connection between the absorber and the sensor was made with three gold bonding wires. The measured thermal conductance shows a linear dependence to the temperature. The values are in a good agreement with Wiedemann-Franz type thermal conductance of the gold wires.

• 한국광학회지
• /
• 제9권2호
• /
• pp.96-99
• /
• 1998

본 연구에서는 새로운 광피드백 장기 안정화법을 제안하고 실험적으로 그 가능성을 입증하였다. 제안한 방법은 광로장을 제어하는 방법으로써 지금까지와는 다른 고감도의 광피드백 위상 변별 기법을 도입하였다. 이는 외부 반사체로 사용한 공초점 패브리-페로 공진기의 반사모드의 편광 분광법에 의하여 위상 변별 신호를 얻어내는 것이다. 실험 결과 약 20시간 정도의 안정된 제어 상태를 유지하였다. 이 실험에서 사용한 광학계가 각각의 분리된 광학 요소를 광학 테이블에 배열한 불안정한 상태였으므로 광학계의 크기를 줄이고 각 광학적 요소를 하나의 판 위에 고정시킴으로서 일체화시킨다면 안정된 제어의 유지시간을 대폭 늘일 수 있을 것이다.

• 한국자기학회지
• /
• 제15권1호
• /
• pp.48-52
• /
• 2005

본 연구는 미래의 가정에 설치되 전자식 전력량계의 정밀 전류측정용 센서 개발에 관한 내용이다. 전류센서는 공심코어 원리를 사용하기 때문에 일반 변류기(current transformer)의 자기포화와 비선형 오차의 한계 영향이 적다. 개발된 센서는 저전류 범위에서 선형도의 개선과 함께 공심코어를 사용하므로 제작이 간단한 장점을 가지고 있다. FEM solver 를 사용하여 자기장 해석을 하였으며 실제 측정된 값과 계산에 의한 값을 비교하였다.