• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.353.1-353.1
• /
• 2016

다공성 물질은 동공의 크기에 따라 미세동공(Micropore), 메조동공(Mesopore), 거대동공(Macropore)으로 나누어 분류한다. 다공성 재료의 장점은 높은 비표면적으로써, 촉매, 센서, 연료전지 전극, 에너지 저장장치 등으로의 이용 가능성을 보여주는 연구가 활발히 보고되고 있다. 종래의 연구는 두 가지 이상의 원소로 구성된 박막을 제작한 후 전기화학적 분해법, 선택적 용해법 등 습식공정을 통해 다공성 구조체를 제작하였다. 하지만 본 연구에서는 Au, Ag 타겟과 $CH_4$ gas를 이용해 ICP-assisted reactive magnetron sputtering 장비를 활용하여 450 nm 두께의 Au-C, Ag-C 박막을 제작하였다. 이후 연속적으로 RF 250 W를 ICP antenna 에 인가하여 $O_2$ plasma dealloying 공정을 통해 탄소(Carbon) 만을 선택적으로 제거함으로써, 건식 공정만으로 Si wafer ($10{\times}10mm^2$) 기판 위에 250 ~ 300 nm 두께의 다공성 Au, Ag 박막을 제작하였다. SEM (Scanning Electron Microscopy)를 활용하여 표면, 단면 형상을 관찰해 다공성 구조를 확인하였으며, AES (Auger Electron Spectroscopy)를 통해 plasma dealloying 전 후 박막의 조성변화를 관찰하였다. 따라서 plasma dealloying 공정으로 제작된 다공성 Au, Ag 박막은 기존의 습식 공정 대비 청결하고 신속한 공정이 가능하며 높은 재현성을 통해 위의 적용분야에 보다 쉽게 사용될 수 있을 것으로 기대된다.

• Journal of Environmental Science International
• /
• v.13 no.2
• /
• pp.161-165
• /
• 2004

This study has been conducted to develop a new recycling technology of sewage sludge using a carbonization process. The carbonizing yield, the calorific value and EC(electric conductivity) of carbonized sewage sludge had a tendency to be decreased with increase of the carbonizing temperature and time, but pH and the C/N were increased with increase the carbonizing temperature and time. The whole pore volume of carbonized sludge processed in the carbonizing furnace was /g, which was smaller than that in the electric furnace. But, the rates of mesopore and macropore were found to account for 100% therein. Rate of color and organic materials removal for dyeing wastewater were determined 70~97%, 78~83% on cotton yarn, 88~96%, 69~80% on wool wastewater and 77~89%, 77~87% on towel compared with powder activated carbon. Effect of carbonized sludge on chrysanthemum growth was investigated. Plant height and number of leaves was better mixture of carbonized sludge than comparison.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.17-22
• /
• 2009

계절에 따른 토양공극의 수리학적 변화를 파악하기 위해서 설마천 유역의 범륜사 독립사면과 광릉 원두부 소유역의 독립사면을 대상으로 장력침투실험을 실시하였다. 토양수분 확보에 신뢰를 받기위해서 TDR(Time Domain Reflectometry)및 현장에서 토양의 불포화 투수계수 측정이 가능한 장력침투계(Tension infiltrometer)를 이용하였다. 계절에 따른 자료수집을 위해서 2008년 3월 20일 부터 약 6주간격으로 10월 29일까지 5회에서 6회 토양수분 자료 및 토양장력침투 자료를 획득하였다. 획득한 자료를 이용하여 포화 및 불포화 수리전도도, 대공극 유효흐름분율(macropore flow), 대공극 유효부피분율을(effective macroporosity) 나타내었다. 분기별로 자료분석 결과 계절별 특성이 나타남을 알 수 있다. 수리전도도는 3월, 5월, 10월은 유사한 반면 6월과 7월 그리고 9월은 상대적으로 높았다. 이는 여름철에 공극 발달이 활발하다는 것을 의미한다. 선행토양수분은 수리전도도에 영향을 미치는 것으로 나타났다. 대공극의 발달은 삼림과 같은 복잡 경관에서는 강우사상에 따른 토양수분의 공간 분포 및 이송, 유출과정이 물순환에 영향을 미친다. 지형분석을 통한 공극의 흐름특성과 토양수분 유의성에 대하여 논의하였고, 대공극 변화에 밀접한 관계가 있는 식생과 그밖에 계절적으로 발달을 일으키는 요인을 모색 하였다. 본 연구는 계절에 따라 변하는 수리전도도를 기초로 하여 불포화대에서 토양공극의 수리학적 변화와 시공간적으로 침투흐름에 얼마나 영향을 주는가를 보여준다.

• Journal of Powder Materials
• /
• v.23 no.3
• /
• pp.189-194
• /
• 2016

We report a facile method for preparing KIT-1 mesoporous silicates with two different macroporous structures by dual templating. As a template for macropores, polystyrene (PS) beads are assembled into uniform three dimensional arrays by ice templating, i.e., by growing ice crystals during the freezing process of the particle suspension. Then, the polymeric templates are directly introduced into the precursor-gel solution with cationic surfactants for templating the mesopores, which is followed by hydrothermal crystallization and calcination. Later, by burning out the PS beads and the surfactants, KIT-1 mesoporous silicates with macropores are produced in a powder form. The macroporous structures of the silicates can be controlled by changing the amount of EDTANa4 salt under the same templating conditions using the PS beads and inverse-opal or hollow structures can be obtained. This strategy to prepare mesoporous powders with controllable macrostructures is potentially useful for various applications especially those dealing with bulky molecules such as, catalysis, separation, drug carriers and environmental adsorbents.

• Applied Chemistry for Engineering
• /
• v.18 no.2
• /
• pp.111-115
• /
• 2007

Bimodally porous ${\gamma}$-alumina granules, including mesopores (2~50 nm) and macropores (>50 nm), were prepared by sol-gel and oil-drop method. Mesopores are made from the voids among the alumina crystallites, while macropores are from the space of the decomposed PS particles used as physical templates during the granulation process. The product ${\gamma}$-alumina granules with the average diameter of 2 mm were characterized by FE-SEM, XRD, FT-IR, $N_2$ porosimetry, and universal mechanical testing system.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.2033-2037
• /
• 2014

A reaction mixture was developed for formation of soft organic monolith that was easily smashed, rinsed, refluxed, filtered, and dried to give monolith particles having high pore volume of macropores. This phase was almost without mesopores. The reaction mixture was composed of methacrylic acid, ethylene glycol dimethacrylate, polyethylene glycol (porogen), and an initiator in a mixed solvent of toluene and isooctane. The selection of porogen and its amount was carefully carried out to obtain the optimized separation efficiency of the resultant phase. The median macropore size was 1.6 ${\mu}m$, and the total pore volume was 3.0-3.4 mL/g. The median particle size (volume based) was 15 ${\mu}m$, and the range of particle size distribution was very broad. Nevertheless the column (1 ${\times}$ 300 mm) packed with this phase showed good separation efficiency (N~10,000-16,000) comparable to that of a commercial column packed with 5 ${\mu}m$ C18 silica particles.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.6
• /
• pp.671-678
• /
• 2007

2-methylisoborneol (MIB) is a musty odor compound produced as a secondary metabolite by some cyanobacteria and actinomycetes. It is lead to distrust in tap water due to taste and odor. It is well known that activated carbon (AC) adsorption is the best available technology to remove 2-MIB and geosmin. In this study, physical characteristics of virgin AC and reactivated AC was compared. The effect of variation of NOM molecular weight on adsorption of 2-MIB in virgin AC and reactivated AC were also evaluated. BET surface area was decreased by 13 to 23% and total pore volume was decreased by 18 to 21% due to first and second reactivation compare to the virgin carbon. However, mesopore volume ($V_{meso}$) was increased about 14% after reactivation. It showed that micropore volume was decreased and move to mesopore or macropore after reactivation. Decreased adsorption capacity of 2-MIB was greatly related to below 3000Da. Adsorption capacity of 2-MIB was rather greater in virgin AC than in reactivated, which is strongly related to micropore volume.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.63-67
• /
• 2014

The effects of reactant composition on the particle size distribution, synthetic yield, and density of Phenol-formaldehyde bead were examined in the synthesis of resol-type phenolic resin. Decrease of the content of DI water as dispersion media can increase the viscosity of suspension, which may cause the difference of particle size distribution and aggregation. The average particle size of synthesized beads was also decreased with the increasing content of stabilizer which can affect the interfacial area. The amount of crosslinking agent showed no effect on the size distribution and synthetic yield, but it made a decrease in the density of synthesized bead due to the macropore in the bead.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1638-1642
• /
• 2010

Mesoporous carbon CMK-3s with different textural properties have been used for the adsorption of phenol to understand the necessary physicochemical properties of carbon for the efficient removal of phenol from contaminated water. The kinetic constants (both pseudo-second order and pseudo-first-order kinetics) increase with increasing pore size of carbons. The maximum adsorption capacities correlate well with micropore volume compared with surface area or total pore volume even though large pore (meso or macropore) may contribute partly to the adsorption. The pore occupancies also explain the importance of micropore for the phenol adsorption. For efficient removal of phenol, carbon adsorbents should have large micropore volume and wide pore size for high uptake and rapid adsorption, respectively.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.382-390
• /
• 2015

Poly(methyl methacrylate) (PMMA) supports and amine additives were investigated to adsorb $CO_2$. PMMA supports were fabricated by using different ratio of pore forming agents (porogen) to control the BET specific surface area, pore volume and distribution. Toluene and xylene are used for porogens. Supported amine sorbents were prepared by wet impregnation of tetraethylenepentamine (TEPA) on PMMA supports. So we could identify the effect of the pore structure of supports and the quantity of impregnated TEPA on the adsorption capacity. The increased amount of toluene as pore foaming agent resulted in the decreased average pore diameter and the increased BET surface area. Polymer supports with huge different pore distribution could be fabricated by controlling the ratio of porogen. After impregnation, the support with micropore structure is supposed the pore blocking and filling effect so that it has low $CO_2$ capacity and kinetics due to the difficulty of diffusing. Macropore structure indicates fast adsorption capacity and low influence of amine loading. In case of support with mesopore, it has high performance of adsorption capacity and kinetics. So high surface area and meso-/macro- pore structure is suitable for $CO_2$ capture.