• 한국가시화정보학회지
• /
• 제10권1호
• /
• pp.40-46
• /
• 2012

Recently micro shock tube is extensively being used in many diverse fields of engineering applications but the detailed flow physics involved in it is hardly known due to high Knudsen number and strong compressibility effects. Unlike the macro shock tube, the surface area to volume ratio for a micro shock tube is very large. This unique effect brings many complexities into the flow physics that makes the micro shock tube different compared with the macro shock tube. In micro shock tube, the inter- molecular forces of working gas can play an important role in specifying the flow characteristics of the unsteady shock wave flow which is essentially generated in all kinds of shock tubes. In the present study, a CFD method was used to predict and visualize the unsteady shock wave flows using the unsteady compressible Navier-Stokes equations, furnished with the no-slip and slip wall boundary conditions. Maxwell's slip equations were used to mathematically model the shock movement at high Knudsen number. The present CFD results show that the propagation speed of the shock wave is directly proportional to the initial pressure and diameter of micro shock tube.

• Computers and Concrete
• /
• 제22권2호
• /
• pp.209-220
• /
• 2018

In order to evaluate the effect of hybrid fibers on the flexural performance of tunnel segment at room temperature, twelve reinforced self-consolidating concrete (SCC) symmetric inclination beams containing steel fiber, macro polypropylene fiber, micro polypropylene fiber, and their hybridizations were studied under combined loading of flexure and axial compression. The results indicate that the addition of mono steel fiber and hybrid fibers can enhance the ultimate bearing capacity and cracking behavior of tested beams. These improvements can be further enhanced along with increasing the content of steel fiber and macro PP fiber, but reduced with the increase of the reinforcement ratio of beams. The hybrid effect of steel fiber and macro PP fiber was the most obvious. However, the addition of micro PP fibers led to a degradation to the flexural performance of reinforced beams at room temperature. Meanwhile, the hybrid use of steel fiber and micro polypropylene fiber didn't present an obvious improvement to SCC beams. Compared to micro polypropylene fiber, the macro polypropylene fiber plays a more prominent role on affecting the structural behavior of SCC beams. A calculation method for ultimate bearing capacity of flexural SCC symmetric inclination beams at room temperature by taking appropriate effect of hybrid fibers into consideration was proposed. The prediction results using the proposed model are compared with the experimental data in this study and other literature. The results indicate that the proposed model can estimate the ultimate bearing capacity of SCC symmetric inclination beams containing hybrid fibers subjected to combined action of flexure and axial compression at room temperature.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1993년도 추계학술대회
• /
• pp.13-16
• /
• 1993

In this paper the morphological characteristic parameters according to the Lee's physical constitution theory are suggested using the X-ray computed tomography. The Lee's physical constitution theory is classify into 4 physical constitutional types by the relative degree of visceral function: those are macro-negative(strong liver- weak lung), micro-negative(strong kidney- weak spleen), micro-positive(strong spleen- weak kidney) and macro-positive(string lung- weak liver). The morphological characteristic parameters are the following. The AA-line is the distance between Rt. & Lt. acupuncture point keug-cheun. The BB-line is the length of lung. The CC-line is the longest width of thorax. The DD-line is the vertical distance between the CC-line and the EE-line. The EE-line is the distance between the Rt. and Lt. anterior superior iliac spines. As the results macro-negative(strong liver-weak lung) has the longest CC-line and the short BB-line. Micro-negative(strong kidney-weak spleen) has the longest EE-line and the short CC-line. Micro-positive(strong spleen-weak kidney) has the longest DD-line and the short BB-line. And macro-positive(strong lung-weak kidney) has the longest BB-line and the short EE-line.

• Asia pacific journal of information systems
• /
• 제5권1호
• /
• pp.236-257
• /
• 1995

Not much attention has been paid to the characteristics of successful MIS in small business in Korea. This study compares the characteristics of successful MIS with those of less successful MIS of manufacturing industry in Korea in terms of micro level, macro level, and personal level. The micro level consists of those variables relating to the system development and maintenance while the macro level consists of the environmental variables relating to the information systems. The personal level measures a personal EDP experience. A mail survey was sent to small manufacturing companies to collect the data for the hypothesis tests. And 81 usable questionnaires were returned for data analysis. This study performs the validity of the categorization of variables in terms of three levels. The results shows that this categorization is appropriate but the personal level. As the personal experiences of EDP in Korea used to come up with those of the organization, the variables in the personal level have high correlations with those in the macro level in empirical testing. As the personal level, however, is different dimension from the macro level in theoretical aspect, the level is maintained separately throughout the study. The data were analyzed with MANOVA and two group discriminant analysis. The analyses reveal that the characteristics of successful MIS are different from those of less successful MIS in terms of three levels. And the micro level is more important than the macro level to develop successful MIS. That is because the organizations have relatively few experience in dealing with information systems, they have not developed unique information systems which are adjusted to their organizational characteristics. Those findings seems to be important determinants of success for the MIS in a firm.

• 한국추진공학회지
• /
• 제16권5호
• /
• pp.74-80
• /
• 2012

최근 Micro Combution, Micro Propulsion, Particle Delivery Systems 등 다양한 공학 응용 분야에서 Micro Shock Tube의 중요성이 커지고 있다. 그러나 여러 분야에 Micro Shock Tube를 효율적으로 적용하기 위해서는 관내유동과 충격특성에 대한 상세한 지식을 필요로 한다. 경계층과 같은 많은 요소들 때문에 Micro Shock Tube 내부의 낮은 Reynolds Number와 높은 Knudsen Number가 형성되며, 이때의 충격파 전파는 기존의 Macro Shock Tube와 상이하게 나타난다. 본 연구에서는 Micro Shock Tube에서의 충격파 전파와 유동특성을 조사하기 위해 직경 3 mm와 6 mm의 두 가지 Micro Shock Tube를 이용하여 실험을 수행하였으며, 압력은 고압관의 파막압력과 저압관의 세 지점에서 측정되었다. 충격파 속도와 같은 다른 변수들의 실험값으로부터 충격파 강도를 찾고 충격파 선도를 나타내었다.

• 한국추진공학회지
• /
• 제17권3호
• /
• pp.37-46
• /
• 2013

최근, micro shock tube는 Micro combustion, Micro propulsion, Particle delivery systems 등과 같은 다양한 공학응용분야에서 사용 되고 있다. Micro shock tube 에서 일어나는 유동 특성은 아주 작은 레이놀즈수 와 높은 누센수의 영향으로 인해 잘 알려진 기존의 macro shock tube 유동 특성과 상당한 차이가 나타난다. 또한 기존의 많은 shock tube의 순간적 과정으로 간주되는 격막파막 과정은 micro shock tube의 격막 근처의 유동장과 충격파 형성을 결정하는 중요한 요인이 될 것이다. 본 논문에서는 micro shock tube를 모사하기 위해 축 대칭, Maxwell's 슬립속도 조건과 온도 변화 경계 조건을 적용하여 수치 해석을 수행 하였다. 또한 유동장과 충격파 형성에 대한 유한 파막 과정의 영향을 자세히 조사 하였고, 결과로부터 충격파 강도는 micro shock tube를 통해 전파됨에 따라 급격히 감소하였다.

• Design & Manufacturing
• /
• 제13권1호
• /
• pp.5-12
• /
• 2019

In this paper, we studied the micro tool deflection, micro cutting with low temperature, and deformation of micro ribs caused by cutting forces. First, we performed an integrated machining error compensation method based on captured images of tool deflection shapes in micro cutting process. In micro cutting process, micro tool deflection generates very serious problems in contrast to macro tool deflection. To get the real images of micro tool deflection, it is possible to estimate tool deflection in cutting conditions modeled and to compensate for machining errors using an iterative algorithm correcting tool path. Second, in macro cutting fields, the cryogenic cutting process has been applied to cut the refractory metal but, the serious problem may be generated in micro cutting fields by the cryogenic environment. However, if the proper low temperature is applied to micro cutting area, the cooling effect of cutting heat is expected. Such effect can make the reduction of tool wear and burr formation. For verifying this passibility, the micro cutting experiment at low temperature was performed and SEM images were analyzed. Third, the micro pattern was deformed by the cutting forces and the shape error occurred in the sidewall multi-step cutting process were minimized. As the results, the relationship between the cutting conditions and the deformation of micro-structure during micro cutting process was investigated.

• 정보과학회 논문지
• /
• 제44권10호
• /
• pp.1105-1111
• /
• 2017

영향력 최대화란 소셜 네트워크에서 최대의 영향력을 갖는 k개의 시드(seed) 노드로 이루어진 집합을 선출하는 문제이다. 이 문제를 해결한 기존 방법들이 갖는 가장 큰 문제는 시드 집합을 선출하는데 너무 많은 시간이 소요된다는 점이다. 이러한 성능 문제는 미시적, 거시적 두 가지 측면에서 발생한다. 본 논문은 미시적, 거시적 측면의 성능 문제 동시에 해결하는 효율적인 영향력 최대화 방안을 제안한다. 또한, 양질의 시드 집합을 선출하기 위한 새로운 경로 기반 커뮤니티 탐지 기법을 제안한다. 네 가지 실세계 데이터를 이용한 실험을 통해, 제안하는 방안이 미시적, 거시적 측면의 문제를 모두 해결하는 동시에 양질의 시드 집합을 선출함을 확인하였다.

• 펄프종이기술
• /
• 제34권2호
• /
• pp.73-83
• /
• 2002

Gloss is very important optical property influencing the perceived quality of the paper surface as well as the surface after printing. Although the average gloss level of paper products or printed images is important to meet end use specifications, the occurrence of gloss mottle, or non-uniformity of gloss, is often of greater concern for meeting quality requirements, especially for the high gloss paper. Gloss variation originates from the irregularities of paper surface, especially surface roughness of paper. Roughness of paper can be divided into micro-roughness (under $1\mu m$ scale in variation) and macro-roughness (over $1\mu m$ scale in variation) depending on the scale of the irregularities. A clearer understanding of the gloss variation of paper can be achieved by separating the contributions of these two scales of roughness, and characterizing them independently. In order to do this, a novel gloss measuring method was introduced. This can detect local gloss with very high resolution. The effect of macro-roughness on gloss variation, which was identified by the measurable surface topography, was separated from the total gloss variation by using this method. The effect of micro-roughness was then estimated indirectly. The local gloss variations of various paper samples were then evaluated to demonstrate the utility of this approach.

• 한국세라믹학회지
• /
• 제32권9호
• /
• pp.967-976
• /
• 1995

The possiblity of the existence of a spontaneous relaxor-normal ferroelectric transition was proposed and examined using 1~5 mol% PbZrO3-doped Pb(Ni1/3Nb2/3)O3-PbTiO3 (PNN-PT) systems having tetragonal symmetry at rom temperature. On cooling, the system with 60mol% Pb(Ni1/3Nb2/3)O3 underwent a spontaneous transition from a relaxor to a normal ferroelectric state. A microscopic examination demonstrates that the relaxornormal ferroelectric transition corresponds to a micro-macro domain switching accompanied with thermoelastic martensitic transformation. The long-range macrodomains below the transition temperature were characterized by twinlike 90$^{\circ}$macrodomains with tetragonal symmetry. The relaxor-normal ferroelectric transition was further correlated with the rhombohedral-tetragonal first-order structural transition.