• Geophysics and Geophysical Exploration
• /
• v.22 no.2
• /
• pp.62-71
• /
• 2019

We conducted DC resistivity and MT survey to obtain the resistivity structure of the central Myanmar basin. We tried to analyze the underground structure through the resistivity variation of Myanmar by performing representative geophysical survey methods because researches on the electrical resistivity structure are insufficient in Myanmar. The electrical resistivity is expected to be low considering the marine sedimentary rocks composed of shale and sandstone in this area. The DC resistivity and MT survey were carried out using SmartRho of Geolux Co., Ltd. and MTU-5A of Phoenix geophysics Ltd., respectively, to visualize the electrical resistivity structure of study area. DC resistivity and MT survey showed an electrical resistivity less than dozens of ohm-m within the depth of 100 m. In particular, MT survey data were almost similar to TM and TE modes in the frequency range above 1 Hz. The two-dimensional inversion of MT data showed a subsurface structure with low resistivity below 150 ohm-m divided into east-west direction. We confirmed that the inversions of DC resisitivity and MT data along an overlapped survey line represented similar results. In the future, considering the high electrical conductivity, it would be effective to perform DC resistivity and MT survey simultaneously to study the electrical resistivity structure of the central Myanmar basin.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.2
• /
• pp.93-100
• /
• 2022

The collision behaviors of the tripod and jacket structures, which are considered as support structures for offshore wind towers at the Southwest sea of Korea, were compared by nonlinear dynamic analysis. These structures, designed for the 3 MW capacity of the wind towers, were modeled using shell elements with nonlinear behaviors, and the tower structure including the nacelle, was modeled by beam and mass elements with elastic materials. The mass of the tripod structure was approximately 1.66 times that of the jacket structure. A barge and commercial ship were modeled as the collision vessel. To consider the tidal conditions in the region, the collision levels were varied from -3.5 m to 3.5 m of the mean sea level. In addition, the collision behaviors were evaluated as increasing the minimum collision energy at the collision speed (=2.6 m/s) of each vessel by four times, respectively. Accordingly, the plastic energy dissipation ratios of the vessel were increased as the stiffness of collision region. The deformations in the wind tower occurred from vibration to collapse of conditions. The tripod structure demonstrated more collision resistance than the jacket structure. This is considered to be due to the concentrated centralized rigidity and amount of steel utilized.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.1
• /
• pp.25-35
• /
• 2004

We achieved a Quantitative economic growth through rapid developed in 1970' and 1980'. It was confronted after IMF crisis that we needed to improve the past economic policy and the industrial structure. In line of that, the problem of the industrial structure like huge accidents of 1990' converted the recognition of safety. And to improve the conversion, the research of a safety management was needed. In this paper, we thought 4M1E(Man, Machine, Method, Material, Environment) as the cause of accident using the principal of process, assuming that output is accident. Applying 4M1E to the structure of QFD(Quality Function Deployment), we propose the safety function deployment, which has the flow line as followed; demand safety, safety characteristic, direct cause, 4M1E and safety management.

• Journal of the Optical Society of Korea
• /
• v.12 no.1
• /
• pp.31-37
• /
• 2008

To increase output power of a He-Ne laser we propose to use the capacitive rf discharge and implement four channel structure. Most of experiments were carried out with a single laser tube from this structure to optimize the output mirror transmission, pressure and composition of the mixture. A laser tube of 2.8 mm inner diameter and 50 cm discharge length can give an output power of above 5.5 mW at 3.39 ${\mu}m$. Four such tubes in "matrix" structure let us obtain 20 mW of output. Simplified models which can be used to evaluate the behavior of an equivalent electrical circuit with laser plasma and qualitative characteristics of output power of He-Ne laser were also described.

• ETRI Journal
• /
• v.17 no.1
• /
• pp.1-10
• /
• 1995

We have achieved very low threshold current densities with high light output powers for InGaAs/ GaAs surface-emitting lasers using a periodic gain active structure in which three quantum wells are inserted in two-wavelength-thick (2${\lambda}$ ) cavity. Air-post type devices with a diameter of 20~40${\mu}m$ exhibit a threshold current density of 380~410$A/cm^2$. Output power for a 40${\mu}m$ diameter device reaches over 11 mW. A simple theoretical calculation of the threshold and power performances indicates that the periodic gain structure has an advantage in achieving low threshold current density mainly due to the high coupling efficiency between gain medium and optical field. The deterioration of power, expected from the long cavity length of $2{\lambda}$, is negligible.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.168-168
• /
• 2010

DCM derivatives were newly synthesized. The OLEDs with a DCM-A as an emitting layer was fabricated and analyzed their opto-electrical properties. The structures of OLEDs were I) ITO/DCM-A/Al, II) ITO/-NPD/DCM-A/LiF/Al, and III) ITO/-NPD/DCM-A/Alq3/LiF/Al. The EL peak of the DCM-A shows the red emission in the range of 700 nm. The structure I) shows that 1050 nW/cm2 at 510 mA/cm2. The structure II) shows that takes the most excellent luminance about 39,000 nW/cm2 at 290 mA/cm2. The EL structure ill shows luminance about 13,000 nW/cm2 at 6 mA/cm2.

• Journal of KSNVE
• /
• v.6 no.4
• /
• pp.431-438
• /
• 1996

The channel type structure which has large openings is frail with respect to torsional strength, and the horizontal-torsional motion is highly coupled, because of the large difference between the centroil and the shear center. Also, a discontinuous boundary phase is came from tansition section between the opened section and the closed section. To analyze the Bending- Torsional coupled mode parameters for the channel type structure, the Transfer Matrix Method was used. Comparing the result of F.D.M.T.M.M yields good results in relatively low frequency region.

• The Korean Journal of Malacology
• /
• v.24 no.2
• /
• pp.81-87
• /
• 2008

Distribution, population structure, and growth of the bivalve Protothaca euglypta were investigated for clams collected from the northwestern part of the East Sea of Russia. This species is distributed in further northern area than it was found earlier. In the southern area, this clam is found in the intertidal zone, up to 8 m in depth. It is one of the most numerous infaunal species of bivalves, and protected to wave action in the gravel-pebble and sand with rubble biotope. Population density of P. euglypta reaches 500 $spc./m^2$, and biomass 2 $kg/m^2$. Size and age composition of the local settlements and allometric growth of P. euglypta depend on a biotope. The growth rate of P. euglypta considerably reduces in case of the northern boundary area, whereas life span increases.

• Smart Structures and Systems
• /
• v.18 no.5
• /
• pp.839-864
• /
• 2016

This paper presents an efficient method for updating the structural finite element model. Model updating is performed through minimizing the difference between the recorded acceleration of a real damaged structure and a hypothetical damaged one. This is performed by updating physical parameters (module of elasticity in this study) in each step using iterative process of modified nonlinear conjugate gradient (M-NCG) and modified Broyden-Fletcher-Goldfarb-Shanno algorithm (M-BFGS) separately. These algorithms are based on sensitivity analysis and provide a solution for nonlinear damage detection problem. Three illustrative test examples are considered to assess the performance of the proposed method. Finally, it is demonstrated that the proposed method is satisfactory for detecting the location and ratio of structural damage in presence of noise.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.312-315
• /
• 2008

The flow structure behind circular and elliptical type rings embedded in a cross-flow was investigated experimentally using two-frame particle image velocimetry (PIV). The experiments were performed in a circulating water channel with a test section of 0.35m height ${\times}$ 0.3m width ${\times}$ 1.1m length. PIV measurements were carried out with varying the Reynolds number in the range of 4.5 ${\times}$ $10^2$ - 4.5 ${\times}$ $10^3$. In the present study, turbulent flow structures in the stream-wise direction and span-wise direction were investigated. The mean velocity field distribution was obtained by statistical-averaging instantaneous velocity fields. The spatial distributions of turbulent statistics such as turbulent intensities and turbulent kinetic energy were also investigated.