• BMB Reports
• /
• v.35 no.4
• /
• pp.377-383
• /
• 2002

Arsenic trioxide ($As_O_3$) was recently demonstrated to be an effective inducer of apoptosis in patients with relapsed acute promyelocytic leukemia (APL) as well as patients with APL in whom all-trans-retinoic acid and conventional chemotherapy failed. Chronic myelogenous leukemia cells are highly resistant to chemotherapeutic drugs. To determine if $As_O_3$ might be useful for the treatment of chronic myelogenous leukemia, we examined the ability of $As_O_3$ to induce apoptosis in K562 cells. In vitro cytotoxicity of $As_O_3$ was evaluated in K562 cells by a MTT assay: the $IC_50$ value for $As_O_3$ was determined to be $10\;{\mu}m$. When analyzed by agarose gel electorphoresis, the DNA fragments became evident after incubation of the cells with $20\;{\mu}m$ $As_O_3$ for 24 h. We also found morphological changes and chromatin condensation of the cells undergoing apoptosis. Activation of caspase-3 was observed 6 h after treatment with $20\;{\mu}m$ $As_O_3$ by a Western blot analysis. Next, we examined the MAP kinase-signaling pathway of $As_O_3$-induced apoptosis in K562 cells. $As_O_3$ at $10\;{\mu}m$ strongly induced the activation of p38, inhibited $As_O_3$ induced apoptotic cell death. These results suggest that $As_O_3$ is able to induce the apoptotic activity in K562 cells, and its apoptotic mechanism may be associated with the activation of p38.

• Journal of environmental and Sanitary engineering
• /
• v.24 no.1
• /
• pp.25-32
• /
• 2009

The analyzed results of the heavy metal concentration of air and soil at the D iron-manufacturing company area were as follows; The concentration of $PM_{2.5}$ in the case area exceeded the air standard level in 3 seasons except summer. The $PM_{10}$ level was similar to the standard level, which was similar to the standard level, which was $50{\mu}g/m^3$. The Pb concentration of air in the case area was $0.13{\mu}g/m^3$, which was slightly higher than $0.11{\mu}g/m^3$ in the control area. The concentration of Cd and Cr were higher in the control area. The heavy metal (Pb) concentration of soil in the case area was $10.7{\mu}g/m^3$, which was higher than that of the control area. For these results, it is necessary for the D iron-manufacturing company area to consider a counter plan for dusts and are duction plan for the heavy metal (Pb).

• Journal of Radiation Protection and Research
• /
• v.32 no.3
• /
• pp.111-115
• /
• 2007

A deuterium oxide leakage accident occurred on October 4, 1999, at nuclear power plant in Korea. The concentration of tritium in air increased and 22 workers were exposed by tritium at that time. It is well known that tritium causes internal exposure. Therefore, we examined complete blood cell count, physical and biological dosimetry fur 13 workers among whole 22 workers to check the health effect and to evaluate the dose estimation of tritium exposure. The leukocyte count test, one of general blood test, was normal. The estimated doses were 0 - 4.44 mSv by physical dosimetry and 0-37 mGy by biological dosimetry. This dose does not exceed radiation dose limit, and the clinical symptoms of the exposed workers were not shown. The consistency between clinical sign and estimated dose means that physical and biological dosimetry were very useful especially in accident evaluation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.3
• /
• pp.334-341
• /
• 2016

Objectives: This study is aimed at examining radon exposure in offices and the factors that can influence the concentrations. Methods: Indoor radon concentrations in a total of 30 places were measured from January 18 to 21, 2016, targeting six buildings in Seoul with different completion years. The measurement was conducted according to the radon measurement guidelines for indoor air suggested by the Ministry of Environment. Results: As a result of comparing each average concentration, underground area concentration was $42.850{\pm}22.501Bq/m^3$, and that of the ground floors was $27.850{\pm}12.232Bq/m^3$, which was lower than the concentration in the underground areas and statistically significant (p=0.045). As a result of comparing the concentration according to whether or not outside air entered, the average concentration for ventilated areas was $24.876{\pm}11.833Bq/m^3$, and the average concentration for enclosed areas was $47.892{\pm}19.375Bq/m^3$. The concentration in ventilated areas was lower at a statistically significant level (p=0.001). Finally, as a result of the multiple regression analysis for evaluating the factors influencing radon concentration, only ventilation was significant (p=0.007). Conclusions: As a result of measuring radon in office buildings, there was no place that exceeding the recommended standard of the US EPA, but the concentration in poorly ventilated areas was measured to be high. An effort to manage radon concentration and reduce it through the improvement of ventilation systems, repeated measurement is necessary in the future.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.3
• /
• pp.163-169
• /
• 2017

Objectives: This study was conducted toestimate quartz concentrations and contents in the airborne respirable dust from various industries. Methods: A total of 818 samples were collected from 174 industries. Respirable dust samples were collected using a cyclone equipped with a 37 mm, $5{\mu}m$ pore size PVC filter. The quartz concentrations were identified using the intensity of the absorption peak of quartz at $799cm^{-1}$ by Fourie Transformed Infrared Spectroscopy(FTIR). Results: The respective geometric means for quartz concentrations in the respirable dust were 0.0050, 0.0049, 0.0025, and $0.0019mg/m^3$ in foundries, ceramics, construction, and cement/stone. The geometric mean of quartz contents analyzed by FTIR were respectively 3.43, 1.99, 1.04, and 0.82% for ceramics, foundries, cement/stone, and construction. The rate of exceeding the Korean Occupational Exposure Limit($0.05mg/m^3$) was 2.03%, but rate of exceeding the American Conference of Governmental Industrial Hygienist(ACGIH) Threshold Limit Value($0.025mg/m^3$) was 7.12%. Conclusions: Given that foundries had a higher quartz concentration, there is a need to reduce respirable dust, such as through wet operation. In order to protect the health of workers exposed to mineral dust, it is necessary to actively consider strengthening the Korean Occupational Exposure Limit.

• Journal of Radiation Protection and Research
• /
• v.37 no.2
• /
• pp.56-62
• /
• 2012

To determine the biological effects of low-dose-rate radiation ($^{137}Cs$, 2.95 mGy/h) on EL4 lymphoma cells during 24 h, we investigated the expression of genes related to apoptosis, cell cycle arrest, DNA repair, iron transport, and ribonucleotide reductase. EL4 cells were continuously exposed to low-dose-rate radiation (total dose: 70.8 mGy) for 24 h. We analyzed cell proliferation and apoptosis by trypan blue exclusion and flow cytometry, gene expression by real-time PCR, and protein levels with the apoptosis ELISA kit. Apoptosis increased in the Low-dose-rate irradiated cells, but cell number did not differ between non- (Non-IR) and Low-dose-rate irradiated (LDR-IR) cells. In concordance with apoptotic rate, the transcriptional activity of ATM, p53, p21, and Parp was upregulated in the LDR-IR cells. Similarly, Phospho-p53 (Ser15), cleaved caspase 3 (Asp175), and cleaved Parp (Asp214) expression was upregulated in the LDR-IR cells. No difference was observed in the mRNA expression of DNA repair-related genes (Msh2, Msh3, Wrn, Lig4, Neil3, ERCC8, and ERCC6) between Non-IR and LDR-IR cells. Interestingly, the mRNA of Trfc was upregulated in the LDR-IR cells. Therefore, we suggest that short-term Low-dose-rate radiation activates apoptosis in EL4 lymphoma cells.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.59-67
• /
• 2018

There are not that many m-health related services limited to the elderly. Many of the elderly who are at risk of dementia are unfamiliar to smart devices, so it is required to design an user-customized App. Therefore, I design and embody a mobile voice alert integrated app, which enables voice input to increase the accessibility of the elderly, so as to prevent diseases caused by declined cognitive function such as dementia. I conducted interviews and questionnaire after having the students use the app in Lifelong Education Center in H region of Gyeongbuk, and the analysis result has showed the high satisfaction. It is expected that it will be able to play a key role for M-Health service for the elderly since it is possible to prevent dementia through the voice health care alert app. I would like to learn deep learning in the future to predict the life patterns and the possibility of dementia of the elderly.

• Biomedical Science Letters
• /
• v.22 no.3
• /
• pp.98-106
• /
• 2016

Investigation of human papillomavirus (HPV) in archival formalin-fixed paraffin-embedded (FFPE) material is important for understanding cervical carcinogenesis. The objective of the present study was to identify the high risk HPVs (HR-HPVs) using HPV E6/E7 mRNA testing from archival tissues in cervical cancer and the relation to HR-HPVs genotypes in paired cervical exfoliated cells. HPV E6/E7 mRNA testing and DNA chip testing were performed in 79 paired cervical FFPE tissues and exfoliated cells from women with histologically confirmed squamous cell carcinoma and adenocarcinoma. Overall agreement in HR-HPVs detection from FFPE samples and cytology samples were 98.5% in HPV 16, 100% in HPV 18, HPV 31, HPV 33, HPV 58, HPV 66, and HPV 68. Type-specific agreement between FFPE samples and cytology samples was 89.1% in HPV positive, 93.5% in HPV 16 and more than 70% in the other HR-HPVs. In conclusion, HR-HPVs were reliably detected in paired FFPE and cytology samples with some variation in type-specific detection.

• Journal of dental hygiene science
• /
• v.15 no.2
• /
• pp.196-201
• /
• 2015

The purpose of this study was to evaluate marginal gap of 3 unit fixed dental prostheses (FDPs) fabricated by 3-dimensional (3D) printing technology and to compare marginal gap of its by a conventional method (lost wax technique and casting method). Ten study models were manufactured. Three unit FDPs were fabricated by 3D printing technique (3D group) and conventional methods (CV group). Marginal gaps were measured by silicone replica technique and digital microscope (${\times}160$). Mann-Whitney test was executed (${\alpha}=0.05$). The mean${\pm}$standard deviation of marginal gap for premolars and molars were $112.5{\pm}8.6{\mu}m$ and $110.2{\pm}7.0{\mu}m$ in the 3D group and $83.2{\pm}4.4{\mu}m$ and $82.2{\pm}4.6{\mu}m$ in the CV group. There were statistically significant differences (p<0.05). As results, clinical application further improvement of 3D printing technique may be required.

• 대한예방의학회:학술대회논문집
• /
• 2001.10a
• /
• pp.201-202
• /
• 2001