• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.1
• /
• pp.33-41
• /
• 2011

The objective of this study was to compare the shear bond strengths of five dentin adhesive systems cured with three different light curing sources. Seventy five noncarious permanent teeth were collected and stored in an 0.1% thymol solution at room temperature after extraction. The tested adhesives were: Adper Scotchbond Multi-purpose Plus Adhesive (SM) Adper Single bond 2 (SB), Clearfil SE Bond (SE), Adper Prompt L-Pop (PL), G-Bond (GB). And three light curing unit systems were used: Elipar Free light 2(LED), OptiLux 501 (Halogen), Flipo (PAC). For the shear bonding test, the labial and lingual surfaces of permanent teeth were used. To obtain a flat dentin surface, the labial and lingual surfaces of the teeth were sanded on SiO2 with number 600 grit and then divided into 15 groups of 10 surfaces each. All samples were theromocycled in water $5^{\circ}C$ and $55^{\circ}C$ for 1000 cycles. The results were as follows: 1. When cured with Freelight 2, the shear bond strength of SM was significantly higher than that of PL, GB (p<0.05), whereas no significant difference was found among those of any other bonding agents. 2. When cured with Optilux 501, the shear bond strength of SM was significantly higher than those of any other bonding agents (p<0.05), whereas no singnificant difference was found among those of andy other bonding agents. 3. When cured with Flipo, the shear bond strength of SM was significantly higher than those of SB, SE, GB (p<0.05), whereas no significant differences was found among those of any other bonding agents. 4. For comparison according to three different light cure unit system, except SB and GB, each three dentin bonding agents showed no significant difference. For SB, only Freelight 2 was significantly higher than the others, with no significant difference between Optilux 501 and Flip. For GB, Statistically significant difference was found only between Freelight and Flipo.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.88-89
• /
• 2003

Rotifer의 먹이 생물로 이용되는 Chlorella의 대량 배양에는 농업용 비료가 널리 이용되고 있다. 그러나 농업용 비료만을 사용할 경우 f/2배지에 비해 성장이 낮은 단점이 있다. 따라서 본 연구는 농업용 비료 배지에 여러 가지 미량 성분을 첨가하여 그 성장 변화를 측정하고, 고밀도 대량 배양에 필요한 미량 원소 성분을 파악하고자 하였다. 먼저 Chlorella의 대량 배양에 이용되는 농업용 비료 배지(복합, 요소비료)에 실내 배양에 주로 이용되는 f/2배지의 trace element 성분 중 코발트(Co), 구리(Cu), 아연(Zn) 및 몰리브덴(Mo)를 f/2배지의 함량을 기준으로 각각 0.5, 1.0, 1.5 및 2.0배로 첨가하여 $25^{\circ}C$, 5,000 lux 연속조명, 15$\textperthousand$에서 배양한 결과 각 미량 원소의 첨가 함량이 높을수록 Chlorella의 성장은 높게 나타났다. 전체 실험구 중에서 아연 2.0배, 구리 2.0배를 첨가한 비료 배지에서 S.G.R.이 각각 0.3598, 0.3599의 성장을 나타내었으며, 아연과 구리 성분을 첨가한 Chlorella에서 높은 성장률을 보였다. 위의 실험에서 첨가효과가 좋은 Cu와 Zn 2.0배와 철(Fe)과 망간(Mn)을 같은 비율(0.5~2.0배)로, 다시 배양한 결과, Cu 2.0배와 Zn 2.0배는 S.G.R.이 각각 0.6283과 0.6231로 가장 높았으며, Fe 2.0배, Mn 2.0배와 1.5배에서 S.G.R이 각각 0.6210, 0.6200, 0.6183의 높은 성장률을 나타내었다. 위의 실험에서 농업용 비료에 첨가된 모든 trace element 중에서 가장 좋은 성장을 나타낸 구리(Cu) 성분의 정확한 공급 농도를 파악하기 위하여 농업용 비료에 2, 3, 4 및 5배를 첨가하여 $25^{\circ}C$, 5,000 lux, 15$\textperthousand$에서 배양한 결과, S.G.R.이 CU 함량을 3배로 첨가하였을 경우 2716$\times$$10^4$cells/$m\ell$로 가장 높은 세포 밀도를 나타내었다. 또한 5종의 trace element (Fe, Mn, Zn, Cu, Co)를 혼합하여 비료 배지(1.25배)에 첨가하여 미량 원소간의 상호 작용에 대해서 알아 본 결과, Fe와 Mn 두가지 성분만을 농업용 비료 배지에 혼합하였을 경우 세포수가 2720$\times$$10^4$cells/$m\ell$로서 높은 성장을 나타내었다. 다음으로 Fe, Mn, Zn 및 Cu 4종을 모두 혼합하여 첨가한 실험구가 2608$\times$$10^4$ cells/$m\ell$ 높은 세포 밀도를 나타내었다. 이러한 결과로서 옥외에서 농업용 비료배지에 구리(Cu, f/2배지 기준 3.0배)성분을 첨가함으로써 Chlorella의 성장을 효율적으로 향상시킬 수 있을 것으로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.547-554
• /
• 2014

In this study, have researched 'a' index from three sound sources, effects on subject and finding optimal 'a' index, which can improve subject's stability, concentration and productivity. Check the health status of subjects who were selected 5 male and 5 female university students, and the period of this experiment was about two months. It were measured each subject's EEG, HRV and vibra image to analyze transition of stability, concentration, stress and heart beat. The results was measured in an environmental test room of temperature $25[^{\circ}C]$, the relative humidity 50 [%], illuminance 1,000 [lux] and air current speed 0.02[m/sec] with 'a' index of three sound sources which are a=1.106, a=1.749 and a=2.227. Results in a=1.106 compared to before exposure, relative $S{\alpha}$ wave, relative $L{\beta}$ wave and relative $M{\beta}$ wave have been revitalized, asymmetry index, stress and HRV have been decreased. Thus, to increase stability, concentration and productivity, also to decrease stress, changes in sound source of a=1.106 was found to be the most effective.

• Journal of the Korean Chemical Society
• /
• v.58 no.2
• /
• pp.179-185
• /
• 2014

Commercial (S)-naproxen was racemized under strong basic condition. After checking the peak position of (R)- and (S)-naproxen by analysis the recemized naproxen, optical purity of 19 commercialized naproxens sold in 2013 in Korea were examined by chiral HPLC. The Chiralcel OD-H column, ChiralHyun-LE(S)-1 column and LUX-Cellulose-1 column were used as chiral stationary phases and the mixed eluent of hexane:isopropanol:acetic acid as 100:1:0.1 was used as a mobile phase with a flow rate of 1.0 mL/min. Each data was obtained from an average value of at least three different experiments for each sample and the relative standard deviation of them appeared very small. The average optical purity values obtained from three different chiral columns were very similar and the total average optical purity value (99.32%) of nineteen commercialized naproxens used in this study were larger than those of three years ago (98.17%).

• Journal of the Korean Chemical Society
• /
• v.58 no.3
• /
• pp.277-282
• /
• 2014

The optical purity of 11 commercial dexibuprofens and 7 ibuprofens sold in Korea in 2013 were examined by chiral HPLC. The Chiralcel OD-H column and LUX-Cellulose-1 column were used as chiral stationary phases and the mixed eluent of hexane:isopropanol:acetic acid as 100:1:0.1 was used as a mobile phase with a flow rate of 1.0 mL/min. Each data was obtained from an average value of at least three different experiments for each sample and the average value of relative standard deviation of them appeared very small, 0.19%. Average optical purity value (97.5%) of eleven commercial dexibuprofens used in this study were smaller than those of 9 years ago (99.2%), but larger than four years ago (95.6%). Enantiomeric ratios of (R)- and (S)-isomers of seven ibuprofen samples used in this experiment were achieved at about 50:50 which was different with the result (44:56) from four years ago.

• Journal of Animal Environmental Science
• /
• v.11 no.3
• /
• pp.177-188
• /
• 2005

In this study, the thermal environmental factors in a layer f(arm such as dry bulb temperature, relative humidity, black globe temperature and illumination intensity were measured and analyzed to serve as basis for effective design and plan of poultry houses. The correlation analysis between the different factors was also done. Heat Index as measure of the thermal stress was also calculated and analyzed. A $1,000m^2$ laying house, 4 meters high with 52,000 layers in six-stage type cages was used in the measurement of the different environmental parameters. The results were as follows; 1. The temperature of the inside air and materials was directly related to the increase in aerial temperature based on the dry-bulb, black globe temperature reading. The correlation factor of the outside to inside air based on dry bulb setting was very significant at 0.927 The dry bulb temperature for inside temperature ranged from $19.9\~28.8^{\circ}C\;with\;SD+2.2^{\circ}C$ while that of the outside air was $16.2\~33.1^{\circ}C,\;SD+3.5^{\circ}C$. In addition, the temperature of the inside air was very stable. 2. The black globe temperature of the inside air ranged from $20.1\~28.8^{\circ}C,\;SD+2.3^{\circ}C$ while that of the outside air was $16.2\~47.5^{\circ}C,\;SD+6.0^{\circ}C$. 3. The relative humidity of the outside and inside air was $72.4\~100\;and\;50.2\~85.6\%$ with an average of $89.2\;and\;71.7\%$, respectively. 4. The illumination intensity in the laying house was less than 7 lux, with an average of $1.2\~2.5lux$ relative to height indicating that the laying house was well isolated from outside radiation. 5. The heat index of the inside air of the laying house had a high variation from $20.5^{\circ}C,\;SD+2.5^{\circ}C$ while that of the outside air was $13.1\~45.5^{\circ}C$, with an average of $21.6^{\circ}C,\;SD+6.3^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.199-204
• /
• 2015

Thermoplastic road markings are one of the most widely used road markings in the world. However, the durability of domestic road markings is relatively shorter than that of the global average of, approximately, three years. To overcome it, the conventional thermoplastic road markings were prepared by adding polyolefin and oxidized PE wax to conventional petroleum resin. In addition, the melting viscosity was designed below 500 cP at $220^{\circ}C$ as well as the optimum viscosity for spray painting, and embedding ratio of glass beads were controlled about 50~60% by spraying in an interval of 1 second. Also the glass bead adhesive ratio was improved by reducing the amount of $CaCO_3$ below 40 wt%. The retroreflectivity was tested under four different conditions to evaluate the abrasion resistance of thermoplastic road markings. The retroreflectivity coefficient satisfied the international standard ($150mcd{\cdot}m^{-2}{\cdot}lux^{-1}$) in this study, and TPRM-7 was determined as an optimal ratio.

• The Korean Journal of Mycology
• /
• v.12 no.2
• /
• pp.59-64
• /
• 1984

The effects of cultural conditions in the rice straw media for cellulolytic enzymes production by Pleurotus sajor-caju were investigated. The optimum moisture content, pH and temperature for enzymes production were 60%, 7.0 and $35^{\circ}C$ in $C_1-cellulase$, and 60%, 5.0 and $25^{\circ}C$ in $C_x-cellulase$, and 60%, 7.0 and $20^{\circ}C$ in ${\beta}-glucosidase$, respectively. When light was irradiated during the cultivation period, $C_1-cellulase$ and ${\beta}-glucosidase$ production were decreased but $C_x-cellulase$ production increased at $500{\sim}1,000\;lux$. During the cultivation period, $C_1-cellulase$ production was contrary to $C_x-cellulase$ and ${\beta}-glucosidase$. Among the various materials added, rice bran was effective to $C_1-cellulase$ production, cotton seed cake and rice bran to $C_x-cellulase$ production, and defatted soybean and fish meal to ${\beta}-glucosidase$ production. The optimum concentration of rice bran for enzymes production were 20% in $C_{1-}$, $C_x-cellulase$ and 10% in ${\beta}-glucosidase$.

• Journal of the Korean Society of Radiology
• /
• v.12 no.3
• /
• pp.381-387
• /
• 2018

A Effect on physiological metabolism of microorganism which irradiated by visible light of non-ionization radiation(12,000 Lux) was investigated. The microorganism used in this experiment was a Rhodospirillum rubrum KS-301 of chemosynthetic microorganism. Batch fermentation of glucose were implement, and based on the data resulted from the fermentation. First, physiological characteristic of microorganism which was not irradiated was investigated. As a result, the decrease of the residual quantity of the substance(5.03 g/L - 2.17 g/L) was increased with the quantity of the bacteria(1.08 g/L - 3.14 g/L)and the quantity of the hydrogenous production(0.186 g - 0.3 g) respectively. Second, physiological characteristic of microorganism which was irradiated was investigated. As a result, the decrease of the residual quantity of the substance(13.17 g/L - 5.2 g/L) was increased with the quantity of the bacteria(4.7 g/L - 10.57 g/L)and the quantity of the hydrogenous production(0.186 g - 0.3 g) respectively. As the physiological characteristic of microorganism which was irradiated by visible light of non-ionization radiation(12,000 Lux) was active with its life, but the cell damages irradiated by with gamma-ray, X-ray, electron-ray in ionization radiation were appeared at cell.

• Applied Biological Chemistry
• /
• v.37 no.4
• /
• pp.295-302
• /
• 1994

For the development of biological wastewater treatment process using photosynthetic bacteria (PSB), photosynthetic sludge process consisted of anaerobic digestion and PSB reactor were designed for the treatment of swine wastewater and the optimal operating conditions in flask-scale were examined. Photosynthetic bacteria from soil, pond, rice field, ditch etc. were isolated in synthetic medium containing high amount of organic acids and finally isolated one strain KK14 which showed the most degradating ability of organic acids was selected for the treatment of swine wastewater. It was identified as Rhodopseudomonas palustris. In the anaerobic digestion stage, the maximum organic acid productivity was obtained at pH 5.0, $37^{\circ}C$, HRT 2 day and under anaerobic standing condition. The optimal operating conditions of PSB reactor for the treatment of swine wastewater were pH 7.0, $30^{\circ}C$ under 4,000 lux illumination, and optimal initial COD loading (kg COD/kg D. C. W of PSB) was 2 (20% v/v seeding) in the main purification stage. Maximum removal rate of COD reached 92% under the above optimal conditions for 5 days.