• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.157-159
• /
• 2007

광속구에서 광원(light source)의 광속(luminous flux)을 측정할 때, 통상적인 측정환경의 변화는 보조램프(aux. lamp)를 사용하여 그 차이를 보정할 수 있다. 그러나 PLS(plasma lighting system)와 같이 표준광원과 시료광원의 위치가 크게 다를 경우에는 그에 따른 광속변화를 직접 측정하고 보정계수를 산출 반영하거나 시료광원의 측정위치와 동일한 위치에서 Calibration을 시행해야 할 것이다. 따라서 본 논문에서는 광속구에서의 기존 광원의 광학적 특성치를 통하여 새롭게 개발되는 광원류에 대한 부 표준램프를 제작 실험한 결과를 제시한 것이다. 광속구에서의 광특성은 센터와 사이드 측정방식에 의한 특성결과치를 기준으로 보정계수를 구하고 부 표준램프를 제작하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.94.1-94.1
• /
• 2014

We have carried out IGRINS test observations during its May commissioning run. Our targets were composed of three Luminous Blue Variables (LBVs), one supernova remnant (SNR), and an unidentified stellar source emitting [Fe II] 1.644 um line. In the preliminary results, three LBVs MWC 314, P Cygni, and AFGL 2298 show different characteristics: the spectrum of MWC 314 which is known to be in a binary system clearly shows double-peak structures in hydrogen and iron lines, the P Cygni spectrum reveals the Brackett series of hydrogen emission lines with prominent P-Cygni profiles, and AFGL 2298 likely at its visual minimum phase shows rather different spectrum with relatively weak hydrogen lines. The SNR (G11.2-0.3) was to test the sensitivity of IGRINS for diffuse emission. We successfully detected a dozen H2 emission lines with a velocity width of ~13 km/s, which might indicate a C-shock origin. The unidentified stellar source was one of stellar/compact sources of unknown nature detected in the survey of the Galactic plane in [Fe II] 1.644 um emission line (http://gems0.kasi.re.kr/uwife/). Its spectrum is under investigation. We will present the spectra of test observations and will discuss their scientific significance.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.4
• /
• pp.448-454
• /
• 2015

In this paper, the band structural design that is typically in a line was arranged in a ring shape, so as to configure the high power LED lighting in such a way as to form a concentrated light distribution angle of less than 15 degrees. The parabolic aluminized reflector PAR38 that facilitates design using area and the area of the optical system to the same extent, applied a multiple light-source condenser lens optical system for the control of integration. The LED used here implemented a single linear light source using ans LED module with ans LED, flip-chip chip-scale package. The optical system was designed based on the energy star standard.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.8
• /
• pp.24-31
• /
• 2014

This paper dealt with the LED optical illumination system design for the Masthead navigation light to replace halogen lamps. We made Fresnel lens satisfy luminous intensity distribution of "Convention on the International Regulation for Preventing Collisions at Sea(COLREG)". The optical system is designed by classifying three parts: light source, lens, and cut off plate. The source of light has been made to have the uniform horizontal and vertical light distribution by placing 6 LEDs at intervals of $54^{\circ}$, and as the cylindrical Fresnel lens, the lens has been designed to achieve the uniform horizontal and vertical light distribution in the range of plain light. Finally, the cover has been designed to block the light from the outside of plain light and ultimately met the standards for light distribution of navigation lights. In addition, the validity of design has been verified with manufacturing a trial product.

• Journal of the Korean Home Economics Association
• /
• v.48 no.5
• /
• pp.17-24
• /
• 2010

Although design, color, and material are important elements in stage costumes, stage lightning also plays significant role in the presentation of stage costumes. Costumes color, material and perception can be significantly influenced by visual effects. Stage illumination can be arranged or managed so that colors are closely related to or enhanced or change the effects of costume colors on the runway or display at specific times. The results of this thesis are as follow; 1) Fabric tone, name, brightness, and chroma of colors were changed by the colors of stage lighting. 2) An achromatic color was changed to a chromatic color after being combined with colors of stage lighting. 3) Stage illuminations can make fabric, colors look similar to stage colors. 4) Plain satin silk fabric which reflects light shows high brightness and chroma after being influenced by stage lighting its shining effects and color changes were clear and apparent. 5) Velvet pile fabric which absorbs light shows low brightness and chroma after being influenced by stage lightning its shining effects and changes of colors were not clear and apparent. In conclusion, natural lights did not significantly influence fabric colors and perception, while artificial lights had wide range of effects on fabric colors and perception.

• Journal of Convergence for Information Technology
• /
• v.10 no.2
• /
• pp.96-101
• /
• 2020

In micro-sized light emitting diodes, which are increasingly attentions as the light sources of displays and semiconductor lighting, increasing the amount of light and improving the luminous efficiency are very important and various development directions and methods have been proposed. In this study, the design of 3-dimensional nano structures through nano frame formation and the application of a nano pattern and a reactive etching method were proposed. And it will also be discussed that nano pillar arrays with nano cavities having improved verticality can be applied to semiconductor light sources through the development of nano frame structures.

• Korean Journal of Materials Research
• /
• v.32 no.7
• /
• pp.320-325
• /
• 2022

Single OLED and tandem OLED was manufactured to analyze the electroluminescence characteristics of DC driving, AC driving, and full-wave rectification driving. The threshold voltage of OLED was the highest in DC driving, and the lowest in full-wave rectification driving due to an improvement of current injection characteristics. The luminance at a driving voltage lower than 10.5 V (8,534 cd/m²) of single OLED and 20 V (7,377 cd/m²) of a tandem OLED showed that the full-wave rectification drive is higher than that of DC drive. The luminous efficiency of OLED is higher in full-wave rectification driving than in DC driving at low voltage, but decrease at high voltage. The full-wave rectification power source may obtain higher current density, higher luminance, and higher current efficiency than the AC power source. In addition, it was confirmed that the characteristics of AC driving and full-wave rectification driving can be predicted from DC driving characteristics by comparing the measured values and calculated values of AC driving and full-wave rectification driving emission characteristics. From the above results, it can be seen that OLED lighting with improved electroluminescence characteristics compared to DC driving is possible using full-wave rectification driving and tandem OLED.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.757-758
• /
• 2010

At the time of medical treatment and surgical operation, halogen lamp and plasma lamp were mainly used as luminous source for lighting. These two luminous sources have drawbacks that the life of lamps are not long, various problems are brought about due to excessive heat generation and its volume is very big because of cooling device. Accordingly, in this research a ring light was developed so that a partial shadowless shooting for the patient's affected area at the medical treatment room and surgical operation room using high luminance LED for which attention is being paid as new lighting parts for medical purpose. LED which was applied to the development used high luminance three color LED for full color for which various color materialization and the adjustment of radiation intensity are possible and we can get white light in order to emphasize the delicate expression for generic tone of shooting object, strong highlight, simple shadow and three dimensional effect at the time of close-up shadowless shooting of the affected area.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.3
• /
• pp.789-791
• /
• 2004

We study on the video-capillaroscopy system for look a.t the nail fold capillary by the computer. This system is composed of the luminous source-producer, image-input, phase microscope. The method and contents of observation on this system are seperated from the image-analysis of nail fold capillary form-patterns and the currents of hematocytes. Therefore we think this system is possible to the practical clinic use for the basic model on the cardiac failure and the deficiency(血虛), stagnant(血瘀) of blood in human.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1880-1885
• /
• 2016

This study aims to design a zonal lumen for parking garage LED lightings of a slim appearance and 20 W/2,000 lm capacity and to fabricate a lighting luminaire accordingly. The frame is of a one-dimensional bar type with a reverse V-shaped section, with LED chips arranged along both sides. To maximize the $60^{\circ}$ to $80^{\circ}$ zonal lumen, the geometric structure was designed with the apex of the reverse V-shaped section at $40^{\circ}$ and both sides at $70^{\circ}$. As for the LED light source, focusing lenses with narrower full-width half-maximum (FWHM) in luminous intensity were used. A ray-tracing simulation method was utilized for the zonal lumen simulation of the given structure. An actual hardware of luminaire based on the simulation results was fabricated and characterized. The suggested model is meant to develop LED lightings with a proper level of zonal lumen required in parking garages.