• Proceedings of the Korean Vacuum Society Conference
• /
• 2002.02a
• /
• pp.184-184
• /
• 2002

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.9
• /
• pp.1-7
• /
• 2010

Ceramic metal halide lamps have been widely used due to long lifetime, high luminous efficiency and good colour rendering. 35[W] ceramic metal halide lamps has very different characteristics between ignition state and steady state. The developed electronic ballast is satisfied to both ignition state and steady state characteristics by using a micro-controller. The proposed electronic ballast is consists of EMI filter, Full-wave rectifier, Active PFC, DBI(Dual Buck Inverter), Igniter and control circuit. It enables to supply both low-frequency rectangular wave voltage and current to the lamp by using DBI(Dual Bcuk Inverter) structure.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.2
• /
• pp.126-131
• /
• 2014

In this paper, plant crops used in the region to grow crops for the LED lighting area of a rectangle to fit the light distribution to maximize the efficiency of a rectangular distribution was made of LED lights. After the fabrication of LED lamps, light distribution, and in the area of $1.2m{\times}3m$ was the analysis of Illuminance chart. As a result of examining the performance light distribution for total Emin/Eav is 56%, and the target area of the light distribution compared to normal lamps Emin/Eav is improved by about 17%. In addition, plants grown in the area to minimize the outgoing light distribution can be focused on the cultivation area, according to the distance of the plants and be able to have the best luminous efficacy is judged.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.787-790
• /
• 2009

High contrast red, green and blue organic light-emitting diodes were fabricated using inorganic metal multi layer composed of thin Al, KCl and thick Al and then were compared to optical and electrical characteristics with the attached polarizer and conventional OLEDs. Ambient light reflection of OLED using inorganic metal layer, polarizer and conventional metal layer were 29.2, 31.1 and 82.5% respectively. Optical characteristics of OLEDs using inorganic metal layer were max luminescence of 13040 cd/m2 and luminous efficiency of 2.12 cd/A at 8V whereas OLEDs using polarizer has 8456 cd/m2 and 1.43 cd/A at 8V each. OLEDs including inorganic metal multi layers show significant technical advantages in achieving high performance of OLED display with improved contrast ratio of 251:1, specifically in Red OLED.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.830-833
• /
• 2009

We report the synthesis and electroluminescent properties of new aromatic compounds as emitting materials based on indenopyrazine, such 2,8-bis(3,5-diphenylphenyl)-6,6,12,12-tetraethyl-6,12-dihydrodiindeno[1,2-b:1',2'-e]pyrazine (DPP-EPY) and 2,8-bis(3',5'-diphenylbiphenyl-4-yl)-6,6,12,12-tetraethyl-6,12-dihydrodiindeno[1,2-b:1',2'-e]pyrazine (DPBPEPY). DPP-EPY showed high thermal stability, narrow FWHM of 46 nm, luminous efficiency of 1.04 cd/A at current density of 10 mA/$cm^2$ and CIE coordinate of (0.161, 0.104).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.762-766
• /
• 2009

We have synthesized and demonstrated a red emission in Organic Light Emitting Diodes (OLEDs) using phosphorescent iridium(III) complexes based on the 2-phenylpyridine ligands with electron-withdrawing carbonyl groups. Among those, a device exhibited highly efficient red-orange emission with the luminance of 20460 cd/$m^2$ at 12 V, the luminous efficiency of 22.0 cd/A at 20 mA/$cm^2$, and the $CIE_{x,y}$ coordinates of (x=0.560, y=0.439 ) at 10 V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1300-1302
• /
• 2009

Transparent $Zn_2SiO_4:Mn^{2+}$ film has been synthesized by spray pyrolysis with various spraying conditions. It illuminates an efficient green emission with the relative emission intensity about 45% under 147nm excitation of a commercial powder phosphor. Additionally, the zinc precursors and additives play a key factor both controlling luminous efficiency and transparency.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.206-207
• /
• 2006

기존의 fence전극구조는 ITO구조에 비해 방전전류와 휘도가 감소하여 효율이 떨어지는 것으로 알려져 있다. 따라서 효율 상승을 위하여 다음과 같은 fence 구조를 제안하였다. 실험은 reference(ITO구조) 와 제안된 structure로 구성되어 있는 4-inch ac-PDP 패널을 직접 제작하여 sustain voltage magin, discharge current, luminance를 측정하여 비교하였다. 제안된 구조는 방전전류 최대 43%감소, 휘도는 최소 35% 감소하여 효율면에서 ITO와 거의 동일한 효율을 가진다.

• Journal of Industrial Technology
• /
• v.30 no.A
• /
• pp.83-88
• /
• 2010

Recently, the LED lighting is widely used to illumination purpose due to its high luminous efficiency and the long life time. However, the light power and lifetime is reduced by junction temperature increment of LED. So it is important to measure the junction temperature accurately. In this paper, we proposed a new design and implementation method of high power LED junction temperature measurement circuit. The proposed circuit has two current sources which are a driving current source and a measurement is verified by experiment, and the result shows that the proposed circuit is appropriate to practical use.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.1
• /
• pp.38-41
• /
• 2002

We have investigated current-voltage-luminance characteristics of organic light-emitting diodes based on TPD/Alq$_3$organics depending on the application of forward-backward bias voltage. Luminance-voltage characteristics and luminous efficiency were measured at the same time when the current-voltage characteristics were measured. We have observed that the current-voltage characteristics shows a reversible current maxima at low voltage, which is possibly not related to the emission from Alq$_3$. Current-voltage-luminance characteristics imply that the conduction luminance mechanism at low voltage is different from that of high voltage one.