• Journal of the Korean Wood Science and Technology
• /
• v.22 no.1
• /
• pp.12-19
• /
• 1994

An electrically heated experimental lumber dry kiln was retrofitted with a computer-based control system to control kiln conditions more precisely and monitor and record several kiln variables. Flat-sawn 2.5cm-thick Pinus densiflora boards were dried in constant temperature process(65$^{\circ}C$ & 50~60 %RH) and continuously rising temperature process, respectively. The average drying rate in continuously rising temperature process was 5.7 %/hr, which was above 3 times faster than that in constant temperature process. But, the average rate of case-hardening and moisture difference between shells and cores of boards dried in continuously rising temperature process were 82 % and 5.5 %, respectively, which were much larger than those of boards dried in constant temperature process.

• Journal of Navigation and Port Research
• /
• v.35 no.10
• /
• pp.847-853
• /
• 2011

The purpose of this study is to develope a series of business models for promotion of value added logistics activities of lumber hinterland in Incheon Northport. A set of policies to create value added developed are an import market diversification model using Incheon Northport, a model by building integration processing center by pallet facility, a model by joint logistics center, an export-oriented Pre-cut material development model and an export processing value added model.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.3 no.1
• /
• pp.83-94
• /
• 2008

This study is designed to evaluate the effect of conservative oriental medical treatment with Kyungkuen Chuna for Herniated intervertebral lumber disc(HIVD) patient. The improvement of the patient was evaluated by Range of Motion(ROM), Straight Leg Rasing Test(SLRT), Visual Analogue Scale(VAS), Oswestry Low-back Pain Disability Index(ODI). After conservative oriental medical treatment with Kyungkuen Chuna, ROM, SLRT, VAS and ODI were significantly improved. It is suggested that Conservative oriental medical treatment with Kyungkuen Chuna could be effective methods to treat the HIVD patient.

• Journal of the Korea Furniture Society
• /
• v.21 no.3
• /
• pp.248-252
• /
• 2010

This study is carried out to introduce the concept of Kagome structure as the new trial for the furniture design and the feasibility of its utilization in furniture industry. Kagome means originally the two dimensional bamboo-basket woven pattern that is composed of interlaced triangles whose lattice points each have four neighboring points, which was used in traditional bamboo craft design like 'Jukbuin(bamboo-wife)'. Its unique truss structure has been widely used by many kinds of the domain of science and engineering in mechanical and architectural industry with some merits, i,e, material utilization efficiency and robust strength. Here we tried to introduce two dimensional and three dimensional form of Kagome which are supposed to be a furniture design elements. Authors think these Kagome design could be realized with domestic lumber of inferior properties. Both of them would be used as a decorative element or mechanical supporter in furniture design.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.5
• /
• pp.459-464
• /
• 2009

This study was conducted to find the relationship between the moisture content and basic density of green lumber and the final moisture content of kiln dried lumber. The possibility of using a ultrasonic nondestructive testing technology was investigated. Four matched 2-foot long boards were kiln-dried for 12, 24, 36 and 48 hours. Twenty three slices were cut to examine the distribution of moisture content along the length. It was revealed that the green weight was a better estimator of the final moisture content of the kiln-dried board than the green moisture content. The standard deviations of the moisture contents of the slices were not correlated with the final moisture contents of the kiln-dried boards. The two ultrasonic devices used for this study were apparently good tools for NDT.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.5
• /
• pp.33-41
• /
• 2008

This study was aimed to develop the knot quantification method to predict bending strength, using x-ray scanner. The bending strength prediction model was proposed in this paper. The model was based on Knot Depth Ratio (KDR) and closely-spaced knot was taken into account. The previous paper reported that KDR is the ratio of the knot and transit zone to the lumber thickness. Even though KDR involves transit zone, it was verified that the ratio of the moment of inertia for knot to gross cross section ($I_k/I_g$) based on KDR was a good predictor for bending strength of lumber. To take closely-spaced knot into account, a projection method was also proposed. This projection method improved the predictive accuracy significantly. It showed coefficient of determinant of 0.65 and root mean square error (RMSE) of 9.17.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.5
• /
• pp.425-431
• /
• 2013

Estimation equations of shear modulus in the plane of laminated veneer lumber (LVL) were compared each other through uniaxial tension test results. The equations - basic elastic equation in the dimensional orthotropic case, Hankinson's formula and empirical equation proposed by Salikis and Falk, were applied to determine the elastic constants at various angles to the grain, which were needed for determination of shear modulus. Tensile elastic modulus of LVL predicted from these equations were compared with test data to evaluate the accuracy of the equation. Tensile elastic modulus rapidly decreased at orientations between 0 and 15 degrees and elastic modulus at grain angles of 15, 30, and 45 degrees overestimated in the presented equations. But the proposed equation by Salikis and Falk showed better prediction, especially at 30, and 45 degrees. This proposed formula would be more useful and practical for estimating of shear modulus of wood composites like LVL to minimize the effect of Poisson's ratio term.

• 한국방재학회:학술대회논문집
• /
• 2009.02b
• /
• pp.130.2-130.2
• /
• 2009

• Korean Journal of Applied Biomechanics
• /
• v.15 no.2
• /
• pp.147-153
• /
• 2005

The purpose of this study were to compare the differences of isometric lumber extension strength and subjective pain degrees between obesity patients group and normal body fat group in disc surgical operated patients. The research purposed to indicate how isometric lumbar extension exercise for 12 weeks affected to lumbar strength and visual analogue scale of patients suffered by chronic back pain. The subjects were 65 low back pain patients(male 30, female 35)who had disease on lumbar in W hospital. The lumbar extension strength was measured at seven degrees of angles, which were $0^{\circ}$ $12^{\circ}$ $24^{\circ}$ $36^{\circ}$ $48^{\circ}$ $60^{\circ}$ and $72^{\circ}$ before and after the exercise program. We got the results of subjective pain degree using the modified visual analogue scale(VAS) of Lawlis et al(1989) and measured the maximal isometric lumbar strength of all subjects using MedX lumbar extension machine. Results were as follows; After the exercise, the lumbar extension strength of normal body fat patients groups included males and female were greater than that of the obesity patients groups in all angles(p<.05). The visual analogue scale of chronic back pain patients was decreased significantly after the exercise(p<.05). The results showed the significance between the lumbar extension strength and the visual analogue scale of chronic back pain patients and showed that the isometric lumbar extension exercise decreased the subjective pain degrees of visual analogue scale with and increased lumbar extension strength. The correlation between the visual analogue scale and the %body fat of chronic back pain patients was no significant after exercise. Therefore, the lumbar extension strength exercise is needed for improvement of back strength, decrease of %body fat.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.20-27
• /
• 2017

The aim of this paper is to present the modulus of elasticity of $E_L$, $E_R$, $E_T$ along three principal axis of softwood dimension lumber by nondestructive method. Ultrasonic measurement was carried out on defect free wood samples taken by the Japanese Larch, SPF (spruce-pine-fir) and Hem-fir $2{\times}4s$. The ultrasound velocities were measured to calculate young's moduli and it was derived elastic constants for each wood samples using the ultrasound velocities and densities of wood. From the test, $E_L$ was much greater than $E_R$ and $E_T$. $E_R/E_T$ ratios were about 1.3. The high density wood had high young's moduli in three principal axis and the difference in young's moduli between species was greater in transverse direction than longitudinal direction. The anisotropy of the lumber was presented through the calculated elastic moduli and compliances matrix in diagonal term were determined by inverting the stiffness matrix.