• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1581-1586
• /
• 2010

Haptic-aided design (HAD) involves the use of a haptic simulator in place of physical prototypes in the design and development of products with which human beings interact physically. The development time and cost can be significantly reduced by adopting this HAD scheme. Although both physical and emotional factors are equally important, only the emotional factors were taken into consideration in the previous HAD process. Consequently, the design of the products was sometimes unsatisfactory from the viewpoint of ergonomics, even though users were emotionally satisfied with the products. To overcome this problem, in this study, we propose a new human-oriented design methodology that is enhanced by taking the physical factors into consideration. The HAD scheme was verified by using a haptic chair simulator to design a tilt mechanism of an office chair for which the stiffness of the backrest can be adjusted; then, the design was simulated using MADYMO. The results show that the proposed method can reflect both the physical and emotional factors to modify the design in real-time.

• Journal of Society of Preventive Korean Medicine
• /
• v.14 no.3
• /
• pp.1-12
• /
• 2010

Objective : Samulatang (herbal description) is much used for women's disease in Korean Traditional Medicine. The aim of this study is to evaluate reproductive toxic effect by Samultang in pregnant rats and fetuses, and ascertain a dose-response relationship Method : Pregnant Sprague-Dawley rats were administered with the Samultang at single, double and quadruple dose for 20 days, orally. Pregnant rats were sacrificed at 20th day of gestation, and observed internal and reproductive organs. Live fetuses of gestation were randomly selected and fixed in 95% ethanol. Fetuses were stained with alcian blue and alizarin red S. We observe maternal body weight,, index associated pregnancy, and skeletal malformations in fetus Result : Maternal body weight of Samultang treated group has increased, side effect was not found in maternal body compared to that of control group. There were no significant difference in internal and reproductive organs. Double concentration administered group had lowest value in number of implantation, live fetuses, implantation rate and delivery rate, Also double concentration administered group showed higher early and late resorption rate than the other group. But, these are not significant. In the sex ratio, number of females, bigger than number of males in all Samultang administered groups. The fetuses of dams treated with Samultang didn't showed external and skeletal malformation. Vertebral and sternal variations were observed in single, double and quadruple concentration administered group but, compared to the control, those variations were insignificant. There were no significant changes in number of ribs, cervical, thoracic, lumber, sacral and caudal vertebrae Conclusion : Samultang is not expected to affect on pregnant rats and fetus about maternal body weight and number of live fetuses. There were no significant changes in organ weight, reproductive organs. Although skeletal variations were showed in vertebrae and sternum, treated groups were shown insignificant changes in skeletal variation

• Archives of design research
• /
• no.16
• /
• pp.101-110
• /
• 1996

CHOOSA GORACK which is a typical example of traditional houses in the CHO SEON dynasty consists of the four terraced builfing group. Among those,SADANG CHAI are located in the highest level,and SADANG CHAI and SADANG CHAI are toward south direction.It means that building orientation and level were influenced by the distinction of social level and the idea of ancester worship. Floor and ceiling level in the same building is different which was caused by the distinetion of social level in the CHO SEON dynasty and an ariental dual as a variety of openings,exposed ceilings,and furniture against a wall were creating a typical Korean visual harmony. Although the furniture and equipments were very important elements in ONDOL BANG the occupance ratio of these were low because the free space in BANG should be utilized effectively to accommodate the space variation.Both an AN CHAI and SARANG CHAI were composed by the standard space module called KAN.And interior elements were established by several factors such as the human scale,the behavior pattern in traditional sitting life style, and the lumber size of post and lintel construction of Korean house.BANG and DAE GHUNG, composed of KAN,were expanded and arranged side by side so that the natural light and ventilation through them could be used in the result of the kind of lay out,traffic circulation was disturved.In conclusion,CHOOSA GOTACK was formed by the sirect effice of the KOREAN penisula. However this study was based on one sample. It may not enough to deduct soild conclusion.Therefore continuous and farher study is needed for the sestemane evaluation.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.2
• /
• pp.24-35
• /
• 2020

This study aims to identify the relationship between termite-damaged cultural heritage sites and the 'Forest Tending Project' based on a comprehensive survey of the status of damage caused by termites and of the Forest Tending Project. It was observed that the Forest Tending Project started in 2004 as a five-year policy project covering over 59% of the nation's forests, which showed the maximum value in 2009 and then gradually decreased. Since then, increased damage to national cultural heritage sites by termites has been confirmed and counter measures have been expanded since 2012. Also, as a result of the National Research Institute of Cultural Heritage surveying the status of termite damage in national cultural heritage sites over these six years, it was identified that about 98% of investigated cultural heritage sites were damaged by termites, about 78% of them were adjacent to forests, and that all 46 national cultural heritage sites which had been included in the 2008 Forest Fire Prevention Cultural Heritage Afforestation Project were damaged by termites. Therefore, it is claimed that the number of termite-damaged cultural heritage sites has increased after an extensive Forest Tending Project was applied on a national scale, and it seems that all cultural heritage areas close to forests are particularly subject to termite-damage due to the number of tree stumps and lumber byproducts which can serve as habitats for the pests.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.3
• /
• pp.45-52
• /
• 1993

Surveyed results on the slope of grain and the twist of sawn lumber of Pinus koraiensis, Larix leptolepis, and Pinus densiflora were summarized as follows: 1. The slope of grain of Pinus koraiensis has a Z-grain in the stem axis. The slope of grain was found to be the lowest at near to the pith and then constantly increased. At the height of 0.2m from the base of stem. a cross section of 35 annual rings was found to have a repeatedly increasing and decreasing slope of grain and then constantly decreased. At the height of 1.2m to 7.2m from the base of stem, the slope of grain increased conspicuously until the 10th annual ring, after which it increased near to the bark with repeatedly increasing and decreasing trends. 2. Pinus densiflora has a S-grain in the stem axis. The lowest slope of grain was found at near to the pith, and the highest in the 10 to 35 annual rings from the pith. 3. Larix leptolepis has a S-grain. At the height of 3.2m from the base of stem, the big fluctuation of the slope of grain was found without any particular trend. 4. The slope of grain and the twist between natural and reforested timber of Pinus koraiensis were found to be almost the same trend in viewpoint of the annual ring. The maximum slope of grain of imported Siberian timber of Pinus koraiensis was found at the 10 annual rings, which was quite similar to that of native species in Korea, but the big difference of the twist was found at 140 annual rings. 5. The twist was little at the mature wood of reforested Pinus koraiensis and Siberians and the duplicated part of mature and juvenile woods of those. On the contrary, the twist was great at the duplicated part of mature and juvenile woods of Pinus koraiensis. 6. The twist of Larix leptolepis showed the S-direction which coincided with that of slope of grain. The twist was greatest at the part of juvenile wood and little at the duplicated part of mature and juvenile woods, and little difference of twist was found between mature and juvenile woods. 7. Siberian larix having a minimum slope of grain showed the lowest twist, and the twist at the duplicated part of mature and juvenile woods showed a middle level of both mature and juvenile woods' portions.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.309-317
• /
• 2014

Harvested wood products (HWP) are known as products from the tree such as sawn wood, plywood, particle board, structural lumber, wooden interior material, wooden furniture, and paper products. Because carbon is locked up in the HWP until eventual end-use of HWP, HWP played a role as the carbon storage which has the effect of stabilizing the concentration of carbon dioxide in the atmosphere. For these reasons, the suggestion that it must admit the carbon storage effect of HWP has been constantly raised. In 2011, the 17th session of the Conference of the Parties (COP) to the United Nations Framework Convention on Climate Change (UNFCCC) which was held in Durban, South Africa, assigned "Production Approach" which targets only the HWP producted by using round wood of domestic forestry as a official method for carbon accounting. Therefore, it is necessary that each country has to determine the half-life of wood in order to correspond to the discussions and negotiations between countries in the future and to develop an inventory of product-specific domestic wood. In this study, some countries' examples of the methods and conditions for determining half-life of HWP were investigated, and it was tried to derive the factor and methodology to determine half-life span of domestic HWP appropriately.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.403-412
• /
• 2021

Despite strengthening requirements for fire retardancy and applied buildings of insulation panels, the number of fires and influence of damage have increased. In this study, the thermal effects were evaluated as the separation distances, and three types of EPS panel, glass wool panel, and gypsum board panel were then selected. Temperature sensors on the panels were installed vertically from the ground. The fire source on the lamination layer of lumber was ignited by changes in the separation distances (0 cm, 25 cm, 50 cm) from the panels. The test results suggested that the maximum temperature was 349 ℃ in the EPS panel. The inside/outside shape changes were limited by the height of the low and middle positions until the critical point of a 25 cm separation distance. Furthermore, the combustion marks appeared after 500 s on average, and then the EPS panel with a high fire strength showed a broad "U type" pattern, glass wool panel, and gypsum board panel showed medium or narrow "V type" pattern. Therefore, the acquired data can provide valuable information for evaluating the fire risks and verifying fire investigation from buildings composed of these insulation panels.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.82-89
• /
• 2004

Two kinds of chemicals (RNF-3 and RNF-4) with high anti-mold effectiveness against stored fungi causing fungal discoloration was selected from among the six kinds of fluoride-based chemicals in the preceding study. In this study, the anti-mold test using 16 species fungi isolated from the softwood lumbers which were fungal discolored and field test in the sawmill was carried out to prove the feasibility for practical using of selected chemicals.For the isolated fungi, the RNF-3 consist of F and Cu showed high mycelial growth control in the PDA medium and fungicidal effectiveness in the japanese red pine (Pinus densiflora), korean pine (Pinus koraiensis) and radiata pine (Pinus radiata) when the concentration was 2% or more. However the RNF-4 consist of F only was not effective compared with RNF-3 because of mycelial growth in the PDA medium and wood treated with 2% or more chemical solution. The RNF-3 also showed a strong anti-mold effectiveness because there was no fungal discoloration for the radiata pine boards treated by 2% and 10 min. soaking in the field test. These results mean that RNF-3 can be used as domestic anti-stain chemicals for prevention of fungal discoloration of the softwood lumber

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.5
• /
• pp.72-79
• /
• 2003

In reliability based design(RBD) method, the distribution characteristics of mechanical properties of material are basic input variable. Therefore, distribution type and parameters of mechanical properties should be determined accurately. Until now, the properties were derived from tests with small, clear specimens. However, the test conditions should emulate as nearly as possible the way in which the timber would be used in practice and the test results should, as closely as possible, reflect the structural end use conditions to which the timber products would be subjected. In this study, structural timbers (38mm by 140mm, 3.0m long) were graded by visual assessment of growth characteristics and defects. And then bending tests were conducted on 498 structural size timbers. For each grade, the distribution type and the parameters of mechanical properties were determined for each grade. For the determination of best-fit distribution type, comparing of square error between distribution types and KS test were conducted. Best-fit distribution type of bending strength(MOR) is weibull distribution for all grade. In case of MOE, normal distribution is best-fit.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.2
• /
• pp.309-321
• /
• 2023

Chamaecyparis obtusa (C. obtusa) belongs to Cupressaceae and grows wild in southern area of Korea. C. obtusa has been used for furnitures because of the superior quality of the lumber and remaining branches and leaves were used for extraction of essential oil (C. obtusa oil). C. obtusa oil has numerous health effects, including anti-inflammation, antibacterial, deodorization, sedative effect. This study was performed to evaluate the effects of C. obtusa oil on anti-wrinkles, skin-barrier and moisturizing. First, DPPH and ABTS assay were conducted to evaluate antioxidant effect and C. obtusa oil showed significance scavenging activity on both radicals. And elastase activity was examined for anti-wrinkle effect. At the result, elastase activity was significantly reduced by C. obtusa oil. Next, real-time PCR was performed to evaluate gene expression. At the results, MMP-1 mRNA expression was significantly reduced by C. obtusa oil in HDF cells. In addition, filaggrin and HAS-2 mRNA expression significantly increased by C. obtusa oil in HaCaT cells. Taken together, these results indicate that C. obtusa oil has potential as a cosmetic material for anti-aging by enhancing anti-wrinkle, skin-barrier and moisturizing effects.