• Korean Journal of Oriental Medicine
• /
• v.1 no.1
• /
• pp.289-319
• /
• 1995

The clinical studies were performed on 301 cases who took Yongkakkyo-tang from June 1993 to December 1994 The results were as follows: 1. About 80%(239 cases) patients who took Yongkakkyo-tang were improved. 2. The ratio of male to female patients was 106:133. In the age distribution, it was found that under 20's were 8%(24/301), 30's and 40's were 33%(98/301), and over 50's was 39%(117/301). 3. In the regional distribution, it was found that Cervical region was 22 cases, thoracic region was 12 cases, cervical & lumbar region complex was 50 cases, upper limbs region was 6 cases, lower limbs region was 12 cases, and lumbar region was 153 cases(64%). 4. Among improved cases, the cases treated only with Yongkakkyo-tang were 16(5%), the cases treated with Yongkakkyo-tang, and treated with Chiropractic were 19(6%), the cases treated with Yongkakkyo-tang and Yanggun-tang chiropratic were 133(44%). 5. Among improved cases, the number of Chiropractic treatment, less then 15 teimes were 69 cases, 15 to 30 times were 91cases. Basedon these results, it was shown that Yongkakkyo-tang could be used for the treatment of degenerative disease of vertebra, and the treatment with Yongkakkyo-tang, Yanggun-tang and Chiropratic is more effective.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.95-103
• /
• 2008

The package loading process of the lumbering industry is an operation that after a pair of workers bind three or six lumbers into one unit and cut both ends of the lumbers, transports the weight cargo of 30-50kg by one meter, pack and load at a height of 1.2 meters. This package loading process causes lots of noise and wood dust when workers carry out the heavy work as the above. Therefore we developed the monolithic both ends cutting package loading equipment in order to prevent from getting musculoskeletal disease. An loading bar working system of this equipment is improved from pneumatic pressure system to oil pressure system, furnished the newly designed flow dividers, and developed the new system that a both end array is loaded identically. Also we developed the safety equipment of loading bar in order to prevent workers mistake and overload from malfunction during the package loading process. The main cause of job evasion on working place could be solved by preventing the musculoskeletal disease and improving the working environments.

• Structural Engineering and Mechanics
• /
• v.73 no.3
• /
• pp.353-365
• /
• 2020

In the previous studies, the authors proposed the use of laminated veneer lumber - carbon fiber reinforced polymer (LVL-CFRP) composite beams for structural application. Bond strength of the LVL-to-CFRP interface and flexural strengthening schemes to increase the bending capacity subjected to positive and negative moment were discussed in the previous works. In this article, theoretical models are proposed to predict the moment capacity when the LVL-CFRP beams are subjected to negative moment. Two common failure modes - CFRP fracture and debonding of CFRP are considered. The non-linear model proposed for positive moment is modified for negative moment to determine the section moment capacity. For the debonding based failure, previously developed bond strength model for CFRP-to-LVL interface is implemented. The theoretical models are validated against the experimental results and then use to determine the moment-rotation behaviour and rotational rigidity to compare the efficacy of various strengthening techniques. It is found that combined use of bi- and uni-directional CFRP U-wrap at the joint performs well in terms of both moment capacity and rotational rigidity.

• Journal of the Korea Furniture Society
• /
• v.21 no.1
• /
• pp.62-71
• /
• 2010

This study was carried out to investigate the physical and mechanical properties of 6 hardwoods before and after heat treatment in an effort to produce the high quality industrial lumber product. The object of the research was to design living products with heat treated woods. The results were as follows. Specific gravities of green woods were in range from 0.87 to 1.12. The specific gravities of never treated woods showed higher than those of the heat treated woods. The shrinkage of heat treated woods when green to air & oven dry was significantly low, compared to never treated woods. The compression strengths parallel to grain of heat treated woods showed higher than those of never treated woods. The moduli of rupture (MOR) of never treated and heat treated woods were $170.37N/mm^2~107.07N/mm^2$ and $122.78N/mm^2~61.27N/mm^2$ respectively. MORs of heat treated woods showed lower than those of never treated woods. The modulus of elasticity (MOE) of heat treated woods showed higher than those of never treated woods.

• Archives of Reconstructive Microsurgery
• /
• v.11 no.1
• /
• pp.47-52
• /
• 2002

One of the most common problems in cord injury is pressure sores. In the early stage of pressure sores, the wound can be covered by advancing or transpositioning a local myocutaneous flap. However, it can be a great challenge to treat end-stage paraplegic patient who underwent multiple prior flaps, where continuous treatment is needed to prevent recurrent pressure sore due to infection and metabolic drain. In these patients, a local myocutaneous flap may be very difficult for coverage of the wounds. Therefore, hemipelvectomy may be considered. The authors performed a hemipelvectomy on a 33 year-old male paraplegic patient who presented with multiple, large wounds seen in end-stage pressure sores. He had a compression fracture of the lumber spine 9 years ago during a motor vehicle accident. After a wide exicision of the wound, the anterior flap was used as a fillet-flap for reconstruction. On the sixth day postoperatively, secondary repair was done due to wound dehiscence and the postoperative results have been satisfactory thus far.

• Korean Journal of Veterinary Research
• /
• v.36 no.2
• /
• pp.289-296
• /
• 1996

A case of schistosomus reflexes in Korean native female calf was observed macroscopically and radiographically. The results were summarized as follows. 1. The abdominal visceral organs were exposed. 2. The vertebral column bent laterally to the left, and the sacrum approached to the cranium by reflected caudal lumber vertebrae, presenting S-shaped lateral twisting of the vertebrae. 3. The right ribs reflected laterally and dorso-cranially from the 7th rib to 13th rib. The left ribs bent caudally from 8th rib to 13th rib. 4. The length of rudimentary 6th right rib was one half of normal size and the 7th right rib was one third. 5. The sternum was bifid split from the fourth sternebra through the xyphoid cartilage. 6. The diaphragm was intact and thoracic cavity was reduced in size. The lung and heart severely deformed in shape and size. 7. The liver markedly deformed in shape and thickness. 8. The pelvic cavity was reduced in size by compression laterally to the left. 9. The uterus horn, ovary, urinary bladder, and urethra were severely deformed in the shape and position.

• Korean Journal of Veterinary Research
• /
• v.59 no.4
• /
• pp.175-180
• /
• 2019

This study was conducted to evaluate and analyze fractures types in wild mammals in Korea. Wild mammals treated at 3 wildlife centers in Korea were included. Of the 63 cases included in this study, water deer was the most common species encountered with fractures. We determined 85 different fracture sites, with maximum lumber vertebral fractures followed by femoral, tibial and pelvic fractures. External skeletal fixator (ESF)-intramedullary (IM) pin (IM+ESF tie-in fixation) was the most common method applied for the surgical treatment of mammals. Lumbar vertebrae and femur were the most common bones involved. The findings of this study are expected to provide information for veterinarians regarding the frequency and characteristics of fractures in wild mammals and serve as a basic database for the types and outcomes of fractures in wild mammals.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.3
• /
• pp.34-41
• /
• 1990

본 연구는 CCA로 방부(防腐)처리된 Lodgepole pine 각재(角材)의 재건조(再乾燥)시 고온건조법(高溫乾燥法)의 적용이 건조속도(乾燥速度) 및 건조결함(乾燥缺陷)의 발생에 어떻게 영향하는가를 고찰하고자 수행되었다. 고온건조시 건조속도는 통당(通常) 열기건조(熱氣乾燥)시보다 약(約) 2.5배 증가되었으며, 방부처리재의 재건조 속도는 처리전(前)의 전건조속도보다 약간 감소됨을 보였다. 표면할열(表面割裂)의 발생정도(程度)은 전건조시의 경우, 고온건조시 보다 심(甚)하였으나 재건조시에는 건조방법간에 큰 차이가 없었다. 방부제의 침투(浸透)를 도모(圖謀)하기 위하여 자상(自傷)처리(Incising)된 각재의 경우에는 재건조시 절개부(切開部)의 연장(延長)에 의해 할렬의 정도가 증가됨을 보였다. 뒤틀림(Warping)의 발생정도는 고온건조시가 통상 열기건조에 비해 심하지 않았으며, 전(全) 건조과정을 통하여 발생된 뒤틀림은 WWPA가 정(定)해놓은 Lodgepole pine 2등급(等級)(No. 2 grade)의 뒤틀림 허용치(許容値)의 범위내(範圍內)에 있음을 보였다. 결론적(結論的)으로, 고온건조시 증가되는 건조속도와 건조재의 질(質)에 큰 영향을 주지않는 범위내에서 발생되는 건조결함을 고려할 때, Lodgepole pine의 전건조및 CCA 처리후 재건조를 위해 큰 문제없이 고온건조법이 적용될 수 있음을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.1
• /
• pp.3-18
• /
• 1974

The exports of plywood are increasing annually and it has ranked first in the world market because of the high quality product and manufactured using mordern techniques. However, it is known that the exports of the other wood products, except plywood, is inactive because of their low quality. Accordingly, to increase the exports of various wood products investigations were carried out on kiln drying techniques to improve the quality of the wood. Wet wood should be kiln dried before use to prevent various drying defects such as distortion, shrinkage etc., which would develop after processing,:and also wet wood is not suitable for cutting, gluing and finishing. Therefore, the kiln drying properties of lumber from such species as oak, ramin and meranti which are used in large quantity for manufacturing exporting wood products have been studied. The results of the research are summarized as follows. (1) The end checks and the time for drying from initial moisture content of about 40 percent to 5 percent moisture content in ovendry were investigated as follows: (2) The kiln dried results, for 30mm stock, which are presented by using kiln schedule table 3 are as follows: (3) The kiln schedules for ramin, meranti and oak are given respectively as follows: Ramin kiln schedule: Table 17 and Table 18. Meranti schedule : Table 12. Oak schedule : Table 15.

• Journal of Korean Neurosurgical Society
• /
• v.39 no.1
• /
• pp.11-15
• /
• 2006

Objective : A prospective, randomized, controlled clinical study is performed to verify the effectiveness of epidural dexamethasone-soaked gelatin sponges to reduce postoperative pain following lumbar microdiscectomy. Methods : Twenty-three patients (10 men and 13 women) undergoing lumbar microdiscectomy were included. Five pieces of gelatin sponge measuring $1{\times}1cm$ [Gelfoam; Pharmacia & Upjohn. Kalamazoo, MI, USA], soaked with either 5mg dexamethasone or an equal amount [2mL] of saline, were left on the decompressed nerve root after unilateral hemilami-nectomy, flavectomy and discectomy. Results : Subjective visual analog scale[VAS] scores of leg pain in the dexamethasone group on the first, third and first postoperative days [2.5, 2.5, 1.7, respectively] were significantly lower than in the control group [5.0, 4.8, 3.6][P<0.05]. No side effects related to the dexamethasone-soaked gelatin sponges were observed. Conclusion : The intraoperative application of dexamethasone-soaked gelatin sponges during lumber microdiscetomy can provide effective-postoperative analgesia without complications.