• Clinical and Experimental Reproductive Medicine
• /
• v.42 no.4
• /
• pp.156-162
• /
• 2015

Objective: To investigate fertilization and embryo quality of dysmorphic mature oocytes with specific morphological abnormalities obtained from intracytoplasmic sperm injection (ICSI). Methods: The fertilization rate (FR) and embryo quality were compared among 58 dysmorphic and 42 normal form oocytes (control 1) obtained from 35 consecutive ICSI cycles, each of which yielded at least one dysmorphic mature oocyte, performed over a period of 5 years. The FR and embryo quality of 441 normal form oocytes from another 119 ICSI cycles that did not involve dysmorphic oocytes served as control 2. Dysmorphic oocytes were classified as having a dark cytoplasm, cytoplasmic granularity, cytoplasmic vacuoles, refractile bodies in the cytoplasm, smooth endoplasmic reticulum in the cytoplasm, an oval shape, an abnormal zona pellucida, a large perivitelline space, debris in the perivitelline space, or an abnormal polar body (PB). Results: The overall FR was significantly lower in dysmorphic oocytes than in normal form oocytes in both the control 1 and control 2 groups. However, embryo quality in the dysmorphic oocyte group and the normal form oocyte groups at day 3 was similar. The FR and embryo quality were similar in the oocyte groups with a single abnormality and multiple abnormalities. Specific abnormalities related with a higher percentage of top-quality embryos were dark cytoplasm (66.7%), abnormal PB (50%), and cytoplasmic vacuoles (25%). Conclusion: The fertilization potential of dysmorphic oocytes in our study was lower, but their subsequent embryonic development and embryo quality was relatively good. We were able to define several specific abnormalities related with good or poor embryo quality.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.3
• /
• pp.149-155
• /
• 2012

The ankle over-pronation causes the mechanical overloading transferred to proximal areas (i.e. knees or hips) over time. Thus, the over-pronation is recognized as a contributory factor in a wide variety of musculo-skeletal pathologies in lower extremities. Commonly, over-pronated ankles are treated using specially designed insoles that support medial heels and correct the posture of lower limbs. However, the biomechanical effects of the insoles are not yet fully understood, so there still are controversies whether such insoles really have clinical significance. In this study, in order to verify the effects of insoles and determine the best shape of the insoles, we examined how the medio-lateral knee joint reaction force changes due to insole conditions through a case study about a subject. As a result, it is revealed that the medial heel post, which drastically reduced the peak medio-lateral knee joint reaction force, has significant effects on the gait of the over-pronated patients. However, in case that the arch support is combined together, the positive effect of the medial heel post may rather decrease.

• Steel and Composite Structures
• /
• v.29 no.4
• /
• pp.557-567
• /
• 2018

Cylindrical shell structures buckle at service loads which are much lower than their associated theoretical buckling loads. The main source of this discrepancy is the presence of various imperfections which are created on the cylinder body during different processes as manufacturing, handling, assembling and machining. Many cylindrical shell structures are still designed against buckling based on the experimental data introduced by NASA SP-8007 as conservative lower bound curves. This study employed the numerical based Linear Buckling mode shape Imperfection (LBMI) method and modified it using a stochastic method to assess the effect of geometrical imperfections in more details on the buckling of cylindrical shells with and without the cutout. The comparison of results with those obtained from the numerical Simcple Perturbation Load Imperfection (SPLI) method for cylinders with and without cutout revealed a good correlation. The effect of two parameters of size and number of cutouts on the buckling load was investigated using the linear buckling and Modified LBMI methods. Results confirmed that in cylinders with a small cutout inserting geometrical imperfection using either SPLI or modified LBMI methods significantly reduced the value of the predicted buckling load. However, in cylinders with larger cutouts, the effect of the cutout is dominant, thus considering geometrical imperfection had a minor effect on the buckling loads predicted by both SPLI and modified LBMI methods. Furthermore, the modified LBMI method was employed to evaluate the combination effect of cutout numbers and size on the buckling load. It is shown that in small cutouts, an increasing in the cutout size up to a certain value resulted in a remarkable reduction of the buckling load, and beyond that limit, the buckling loads were constant against D/R ratios. In addition, the cutout number shows a more significant effect on decreasing the buckling load at small D/R ratios than large D/R ratios.

• Design Convergence Study
• /
• v.17 no.3
• /
• pp.55-70
• /
• 2018

This study was conducted as a part of long-term project on the development of a set of design guidelines for a crutch as mobility aids for the handicapped in the lower extremity and the suggestion a practical solution for a crutch design. The purpose of this study is to develop a design of a crutch and a set of prototypes that reflects the characteristics of crutch-gait and has a realistic possibility for mass production-based industry. TOGO, a axillary crutch as the result of this study, shows a number of characteristics distinguished from ordinary crutches. These are (1)Minimize the shock associated with planting of the crutch tips by improving the form and structure of crutch tip and axillary pad, (2)Ergonomically designed crutch in accordance with users' body movement while walking on crutches, (3)Easy length control to maximize mobility and maneuverability by changing the cross section of the crutch revolutionary, (4)Minimize possibilities of safety hazards, and (5)Attractive shape of the crutch to keep user self-esteem. The revolutionary crutch derived from this study results has been patented, and the company is seeking to mass-produce and find ways to commercialize it after reviewing the potential problems that may arise in the mass production environment.

• Clinical and Experimental Reproductive Medicine
• /
• v.50 no.4
• /
• pp.270-276
• /
• 2023

Objective: This study investigated the clinical and laboratory factors associated with the presence of dysmorphic oocytes in intracytoplasmic sperm injection (ICSI) cycles. Methods: The study involved 200 ICSI cycles, performed from 2020 to 2021, that yielded at least one mature oocyte. Clinical characteristics and ovarian stimulation methods were compared between 68 cycles with at least one dysmorphic oocyte (the dysmorphic group) and 132 cycles with normal-form oocytes only (the non-dysmorphic group). Dysmorphic oocytes were characterized by dark cytoplasm, cytoplasmic granularity, cytoplasmic vacuoles, refractile bodies in the cytoplasm, smooth endoplasmic reticulum in the cytoplasm, an oval shape, an abnormal zona pellucida, a large perivitelline space, debris in the perivitelline space, or an abnormal polar body. Results: The ages of the women, indications for in vitro fertilization, serum anti-Müllerian hormone levels, and rates of current ovarian endometrioma were similar between the dysmorphic and non-dysmorphic groups. In both groups, the three ovarian stimulation regimens, two types of pituitary suppression, and total gonadotropin dose were employed similarly. However, the dual-trigger method was used more frequently in the dysmorphic group (67.6% vs. 50%, p=0.024). The dysmorphic group contained significantly more immature oocytes and exhibited significantly lower oocyte maturity (50% vs. 66.7%, p=0.001) than the non-dysmorphic cycles. Within the dysmorphic group, significantly lower oocyte maturity was found in the cycles using a dual-trigger, but not in those with a human chorionic gonadotropin trigger. Conclusion: ICSI cycles with dysmorphic oocytes are closely associated with reduced oocyte maturity. This association was observed exclusively in dual-trigger cycles.

• The Research Journal of the Costume Culture
• /
• v.4 no.3
• /
• pp.305-323
• /
• 1996

The purpose of this sty is to forecast the tendency of clothing colors, to provide materials useful for making the color plan for a better costume, and suggest new information in the apparel industry. To achieve these purposes, this study was carried out by suggesting vogue colors of recent apparel, along with the 20 standard colors of Muncell to 350 men and women in their 20s residing in Taegu.. We analysed and compared their preferred colors in suits vidual factor ;age, sex, education ,skin color, and body shape, and additionally classifying their interest in clothing colors, cause for color selection , degree of interest in color of clothes, color satisfaction of apparel market, and color combination of clothing, color satisfaction of apparel market, and color combination of clothing. We compared these elements according to their age, sex, and education. The results of this study is summarized as follows; 1. It was shown that both men and women in their 20s preferred warm colors the first colors mentioned being the most popular ; Pastels, Red, Blue and Black. They disliked dark and sordid colros in the order of Mauve, Khaki and Red. They preferred wearing Pastels and Yellow in the Spring, White, Blue, and Pastels were the favorites for summer, Beige in autumn, and black, Gray, and Beige in winter. The repugnated colors they chose two wear were Black, Red, Mauve, Khaki in spring and summer. Mauve, Red, Yellow were favorites for autumn, and Blue·White, Yellow·Green, and Pastels in winter. 2. The preferred colors for T-shirts were Yellow, Pastels, White in spring. White and Pastels were summer favorites, Beige an Red for autumn, and Black, Red, Beige in Winter. As for suits, the preferred colors in spring were in the order of Pastels, Beige and Yellow. The preferred colors of upper garments in summer were in the order of White and pastels. for lower summer garments Pastels, White and Blue were favorites. In autumn, Beige was shown to be highly preferred, and in winter, the order of preferred colors was Black, Gray and Beige. 3. On of those individual factors showing the greatest difference was sex. 4. Those factors having the greatest impact on the selection of clothing color were the season and their preference color. 5. The in vogue color of men in their 20s was at a higher level than hat of women. The groups that had an upper college level education showed a significant difference in their choices thant hose who were highschool graduates and technical college student and graduates. The consideration of inteterest in color of clothes, holding clothes during new purchasing, body shape and skin color was higher for women than men. In buying and wearing accessaries, women tend to take into consideration the harmony with the garment, and there was shown a significant difference between highschool graduates and the groups above the level of college education.

• The Journal of the Korea Contents Association
• /
• v.13 no.12
• /
• pp.860-868
• /
• 2013

The purpose of this study is to ensure safety by measuring External radiation dose ratio (ERDR) by traits of patients in many ways after administering radiopharmaceutical($^{18}F$-FDG) for PET Torso scan, and to decrease ERDR of those to RI technologist, caretakers, and those who frequently exposed to radiation by arousing attention to radiation dose. Radiopharmaceutical was administered to 80 patients who conducted PET Torso from January to June, 2013. Radiation dose emitted from the patients was measured according to body shape(BMI), water hydration, height, amount of radiation administration. From the moment immediately after the radiopharmaceutical was administered, ERDR was measured by personal traits of patients. The radiation dose increased in proportion to the administered amount of the radiopharmaceutical, and there was no significant difference depending on the body shape of the patients. When water was supplied and the height was normal, the radiation dose was lower compared with the cases where water was not supplied and height was not normal. There is a need for making efforts to minimize the working time through sufficient education and mock training before those who RI technologist with sources of radiation for complying the radiation safety management rule. And they should minimize the ERDR by wearing a protective gear.

• Conservation Science in Museum
• /
• v.25
• /
• pp.1-8
• /
• 2021

This study investigated White Porcelain Water Dropper with Openwork Lotus Scroll Design and Eight Trigram Design in Cobalt-blue Underglaze (hereinafter, the "water dropper") in the collection of the National Museum of Korea using computed tomography (CT). A replica was produced to examine both the structure and its original production method. The CT scanning identified no joint lines or pores in the clay, which suggests that the body (the lower part of the water dropper) was shaped in a single piece using a mold and was then matched with a mold-formed lid (the upper part of the water dropper). The inner container of the body portion was roughly trimmed with a bamboo knife so that its upper surface could be securely attached to the bottom of the lid and prevent any leakage in the joined surface. It appears that the inner container for storing water was made first in a cylindrical shape that met the unit of quantity used at the time and could be easily formed by molding. It was transformed into a trapezoid shape during the process of combining it with the lid. A cylindrical inner container was reproduced using silicon 3D printing to compare its capacity with that of the original inner container. The comparison revealed that the reproduced container had a capacity of 152.5㎖, whereas the original container holds approximately 168.6㎖, a figure similar to three hop (around 174㎖) in Joseon-period units of quantity. Since the capacity of the cylindrical inner container corresponds to a known measure from the late Joseon dynasty, it is likely that the water dropper was originally produced to contain a cylindrical inner container.

• Conservation Science in Museum
• /
• v.27
• /
• pp.1-22
• /
• 2022

A chimi(a roof ridge decoration) excavated from the Busosan Temple Site in Buyeo was restored in 1978 at the Buyeo Museum. The gypsum restoration material had deteriorated over time and part of it was seriously damaged and unable to bear the weight of the chimi. The chimi features traces of emergency treatment revealing that the inside of the body and some portions of the tail were reinforced several times using epoxy resin. A condition survey performed in preparation for its transfer for an exhibition found the lower body and wings of the chimi to be highly vulnerable and it was determined that the chimi needed further restoration. The dismantling of the chimi for restoration revealed several elements that provide clues to the production techniques applied by its makers, so they were subjected to inspection. This study explores the production techniques used in the chimi from the Busosan Temple Site that were revealed during the process of dismantling it for restoration. The chimi was inspected using 3D scanning and its rigid vertical shape was restored to a natural form based on the production techniques identified during the dismantling process. The existing restoration material was replaced to improve durability. 3D printed elements were produced based on 3D modelling and were joined to the original chimi to correct its shape and fill in the missing parts, restoring the chimi to its original appearance.

• Korean Journal of Human Ecology
• /
• v.13 no.1
• /
• pp.97-110
• /
• 2004

This study was carried out to investigate the ity, food habits and eating behavior of the college students. The responses of 1,112 students(male 468, female 644) to the questionnaire were analyzed. The results were summarized as follows: The means of height, weight were $174.1{\pm}5.1cm$, $66.0{\pm}8.1kg$ for males, respectively and were $164.3{\pm}6.0cm$, $50.7{\pm}5.3kg$ for female, respectively. The means of relative body weight(RBW) were $99.1{\pm}11.6$ for males and $91.2{\pm}10.3$ for females. Body mass index(BMI) were $21.8{\pm}2.5$ for males and $19.3{\pm}2.0$ for females. The rate of underweight, normal and obese on the basis of BMI was 19.9%, 71.5%, 8.6% for males, respectively and 68.4%, 30.4%, 1.3% for females respectively. Among underweight subjects, 59.3% answered that they had normal weight. 37.5% of normal weight subjects regarded themselves more obese or less obese than their actual body shape. Food habit score(out of a possible 50 points) was 29.4 in male and 29.3 in female, the score of self boarding students was the lowest among groups. Self boarding students had lower scores than the home-living students on the regularity of meals, eating time, protein intake, vegetable intake, lipid intake and food balance. The average meal frequency of the students was 2.46 times a day. Breakfast was skipped most frequently. Self-boarding students missed breakfast more often than other groups. The main reason of skipping breakfast was due to lack of time. The type of favorite snack was cookies and ramyun and in terms of snack time, most of the students had snack between lunch and dinner or after dinner. The rates of smoking and alcohol drinking were 29.8%, 76.7%, respectively and 25% of subjects exercised regularly. The results of this study suggest that a comprehensive nutrition education program is needed for college student to improve their eating habits about skipping meal and to maintain their health.