• 한국의류학회지
• /
• 제34권6호
• /
• pp.937-954
• /
• 2010

This study analyzes the body characteristics of Korean obese women using 2004 Size Korea data. For selecting the obesity sample, 7 obesity judgment indices were chosen from previous clothing-related studies. A total of 636 females defined as "obese" by 5 out of 7 indices were selected as subjects for this study. 54 body measurements and obesity judgment indices were used. First, the subjects had a BMI 27.11, R$\ddot{o}$hrer index 1.76, Vervaeck index 104.77, Relative weight 133.00, and WHR 0.90. In the case of the distribution by age groups, the twenties were 6.4% of the entire subjects, the thirties were 18.2%, the forties were 16.4%, the fifties were 37.4%, and the sixties were 21.5%. The result of the ANOVAs (divided into 5 age groups) showed significant differences in 41 measurement items except for bust circumference, waist length front, and all of obesity judgment indices. Second, according to the ANOVAs among stature groups divided by 5cm pitches there are significant differences in all measurements except for bust circumference. The results of the ANOVAs among bust circumference groups divided by 5cm pitches show that significant differences were observed in all measurements except four measurement items (including body rise). According to the ANOVAs among the waist circumference groups divided by 5cm pitches, there are no significant differences in all height measurements and shoulder length, waist to hip length, and crotch length. It is confirmed that stature and bust circumference have a deep relationship with measurements other than waist circumference. Third, as the factor analysis were conducted using 39 measurement items to extract the body characteristics of obese women Factor 1 is "circumference measurements & obesity judgment indices," Factor 2 is "heights & arm-related lengths," and Factor 3 is "size and ratio of waist circumference & hip circumference." Factor 4 was "lengths in upper body," Factor 5 was "back width in upper body," Factor 6 was "side neck point to bust & bust circumference," Factor 7 was "length in lower body & arm circumferences," and Factor 8 was "neck base circumference & front widths in upper body." These 8 factors explained 76.54% of the total variance.

• 대한가정학회지
• /
• 제19권2호
• /
• pp.151-163
• /
• 1981

This study was to investigate the changes of shape of the surface square measurements, the rate, measurements of expansion and contraction and correlation. In this study was found the following: 1. According to the developmental illustration of the shell it was revealed that there was a great change in the thigh area of the body. When the leg was raised and the waist bent forward the front sections of the abdomen were contracted and the center back of the hip was expanded. 2. It was found that the contraction was present in the girth of the back section and front section was expanded in the rate of the body surface. In the length from the middle waist to hip the front area showed a great deal of contraction the back area of the hip & thigh revealed a great deal of expansion. 3. By the somatometry, the measurements of the expansion and contraction of the body surface, there was a great change in waist and hip. It revealed that the maximum expansions of waist and hip line in the chair were 1.8cm and 4.08cm respectively. Therefor, when slacks are made at least the amount of ease of 1.8cm of waist line and 4cm of hip line must be made and the allowance of the center back of hip area must be made. 4. It revealed that there was a correlation between waist and hip girth.

• 한국가구학회지
• /
• 제19권3호
• /
• pp.193-202
• /
• 2008

In order to occupy educational furniture market that grows by the day and to meet demands for alternative product for the current market, this study took business features and productivity of Sinil Furniture Co into consideration, and developed computer desk for education by group, which is new among educational furniture. The scope of the study ranges from data research based on design process into creation of prototype. By improving the condition where, despite that electrically-powered computer desk for anti-theft system is high priced, it sees frequent malfunction, the study suggested low-priced, non- electrically-powered anti-theft system which has more solid structure. Furthermore, in order for the user to be more free and comfortable while studying on it, it differentiates from other products by locating PC main body to the back of the monitor and lowering it below the altitude of monitor to prevent it from interfering with studies. We've made the higher board of the desk in a soft curved-shape in order to lessen the stress from studying. And as space for the monitor's lower mount was decreased, we've put the lower mount below the higher board; so that lacking space can be recovered while functioning as anti-theft system. Moreover, we've covered the PC main body with steel cover so that it would add color and formal luxuriousness to the appearance of the desk. Considering ease of mobility and productivity, knock-down system was introduced.

• 대한가정학회지
• /
• 제46권9호
• /
• pp.137-146
• /
• 2008

This study was conducted in order to spread out lower body 3D scan data of men in their twenties. The aim was to achieve slacks pattern with ease allowance through comparison with existing flat patterns. For conversion of 3D scan data into 20 pattern, reference lines were established by using Rapid Foam in 3D shape analysis software. 2C-AN program and Yuka CAD were used to convert 20 pattern earned with straight posture of 3D scan data into slacks pattern by using Triangle Simplification & Runge-Kutta Method. In order to achieve this we needed to set a line 9cm below the hip line, to array vertex of each block to crease line while maintaining the horizontal line. And then we needed to set ease allowance in back crotch and to set waist circumference or hip circumference ease allowance in side seam of slacks. Results showed that long front crotch length can be achieved if 3D scan data is compared with 20 existing flat pattern. Slacks pattern that raise front crotch by about 1.5cm compared to back crotch and also possess ease allowance in back crotch area are great in appearance evaluation.

• 한국의류학회지
• /
• 제47권1호
• /
• pp.123-136
• /
• 2023

To develop smart sportswear capable of measuring biometric data, we created a close-fitting pattern using two- and three-dimensional (2D and 3D, respectively) methods. After 3D virtual fitting, the tightness of each pattern was evaluated using image processing of contact points, mesh deviation, and cross-sectional shapes. In contact-point analysis, the 3D pattern showed high rates of contact with the body (84.6% and 93.1% for shirts and pants, respectively). Compared with the 2D pattern, the 3D pattern demonstrated closer contact at the lower chest, upper arm, and thigh regions, where electrocardiography and electromyography were primarily carried out. The overall average gap was also lower in the 3D pattern (5.27 and 4.66 mm in shirts and pants, respectively). In the underbust, waist, thigh circumference, and mid-thigh circumference, the cross-section distance between clothing and body was showed a statistically significant difference and evenly distributed in the 3D pattern, exhibiting more closeness. The tightness and fit of the 3D smart sportswear sensor pattern were successfully evaluated. We believe that this study is critical, as it facilitates the comparison of different patterns through visualization and digitization through 3D virtual fitting.

• 복식문화연구
• /
• 제31권5호
• /
• pp.627-639
• /
• 2023

This study seeks to increase the satisfaction of elderly men when purchasing and wearing ready-to-wear clothes by designing a slacks pattern suitable for their body type, which is determined by analyzing their lower bodies using virtual avatars and 3D virtual simulation system. The study found the following. First, based on virtual visualization of the comparison slacks pattern, the waistline position was consistently the lowest scored question among the evaluation survey items. Interpretation of this dissatisfaction suggests that, because the front waistline falls below the abdomen, the lower body, and especially the abdominal shape, is unpleasantly emphasized. Second, by using a virtual simulation system, the study developed a new slacks pattern that considered the concerns of elderly men. The primary measurement changes were as follows: front waist girth W/4+1.5cm+0.5cm, back waist girth W/4+1.5cm-0.5cm, front hip girth H/4+2.5cm-0.5cm, back hip girth H/4+2.5cm+0.5cm. Third, the new slacks pattern's appearance was evaluated more highly than the comparison pattern, confirming the new pattern's appropriateness for elderly men. This study demonstrates how slacks and other clothing patterns designed in a 3D virtual garment simulator can be used to design more appealing clothing for elderly men, increasing the satisfaction of wearing ready-made clothes at older ages.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.612-616
• /
• 2007

This paper describes a procedure to improve road noise using DPDS estimation. We can estimate a body local stiffness at chassis mounting point where the path of road input vibration by DPDS with experiment and FE simulation. DPDS result from FE model has a good correlation with experiment data. FE model DPDS shows weak points among chassis mounting points. Body panel thickness and shape were changed to meet DPDS target. Improved DPDS of critical points makes a road noise level lower.

• 한국해양공학회지
• /
• 제11권3호
• /
• pp.20-28
• /
• 1997

The fatigue crack propagation properties and fatigue life of two kinds of Al body panel for automobile were examined experimentally by using the plate specimen and the single spot welding specimen. The fatigue limit of spot welding specimens was lower than that of a plate specimen. The fatigue limit was similar in two kinds of spot welding specimen. The shape and size of crack propagation were observed and measured on beach mark of fracture surface. The crack propagation of surface crack specimen showed almost same tendency to that of a thick plate as almost semi-elliptical. In spot welding specimen, the fatigue crack occurred in inside surface of nugget area was almost semi-elliptical. The crack growth rate can be explained using equation of stress intensity factors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.327-329
• /
• 2000

This paper present the characteristic improvements of one-coil coin type vibration Motor. Rotor is consist of coreless coil and 4 segment commutator. Magnet is 4 pole, z direction magnetized. This one-coil coin type vibration motor has simple mechanical structure and good efficiency. So production cost is lower than other having 2 or more coils coin type motor but it has the weak points. That is small vibration magnitude and dead zone. Modifying the shape of rotor, vibration magnitude is increased. To avoid the dead zone we attached more magnetic body on rotor. As result we show the optimal position of magnetic body.

• 한국식품영양과학회지
• /
• 제39권3호
• /
• pp.383-391
• /
• 2010

본 연구는 광주 전남지역 중학생 732명을 대상으로 BMI 수준에 따른 식습관, 식행동, 체형인식 및 체중조절 실태에대해 조사하였으며 이에 대한 연구 결과를 요약하면 다음과 같다. BMI 수준에 따른 조사대상자의 분포는 남학생이 저체중군 27.8%, 정상체중군 45.9%, 과체중군 26.3%이었으며, 여학생은 저체중군이 26.2%, 정상체중군 53.6%, 과체중군 20.2%이었다. 남녀 중학생의 평균 BMI는 각각 $20.7{\pm}1.0$과 $20.6{\pm}0.2$이었다. 점수로 평가한 식습관과 식행동에서 남자중학생은 과체중군이 저체중군에 비해 빨리 먹는 점수가 높으며, 저녁식사의 양과 야식섭취 및 식품선택 시 기호보다 영양을 고려하는 점수는 낮았다. 여자 중학생은 과체중군이 과식과 스트레스 시의 음식 섭취와 식품선택 시 가격보다 영양을 고려하는 점수는 높았고, 야식 점수가 낮았다. 조사대상자의 신장은 남자 중학생 저체중군이 정상체중군과 과체중군에 비해 유의적으로 낮았으나, 여자 중학생은 그룹간 차이가 없었으며, 남녀 중학생 모두 실측한 신장보다 더 크기를 원하였다. 조사대장자의 체중은 남녀 중학생 모두 그룹간의 차이가 유의적이었다. 남자 중학생은 과체중군에서만 체중감소를 희망한 반면, 여자 중학생은 과체중군뿐아니라 정상체중군에도 체중의 감소를 희망하였는데, BMI가 클수록 원하는 체중과 실측체중간의 차이가 컸다. 본 연구대상자들의 인지체형은 남녀 중학생 모두 해당 군별 체형에 근접하였으나, 정상체중군에서 인지체형에 대한 왜곡경향이 높았으며, 희망체형과 인지체형의 차이가 과체중군에서 가장 컸다. BMI가 높을수록 체중조절에 대한 관심과 경험이 높았는데, 남자 중학생은 건강을 위해서, 여자 중학생은 날씬한 외모를 갖고 싶어서가 체중감량의 이유로 가장 많았다. BMI가 클수록 체형만족도가 낮으며, 희망체형과 인지체형간의 차이 값이 컸으나 스트레스는 BMI가 낮을수록 컸다. 또한 희망체중과 체형에서 실측체중 및 인지체형을 뺀 값이 클수록 체형만족도가 낮았다. 본 연구의 결과, 과체중군은 정상체중군과 저체중군에 비해 과식, 스트레스 시의 음식섭취에서 보다 바람직하지 않았으며, 스트레스와 체중 조절관심도 및 경험이 더 많아, BMI 수준에 따라 식생활 양상에 차이를 보였는데, 과체중군의 식행동과 태도가 보다 바람직하지 못하였다. 따라서 남녀 중학생을 대상으로 올바른 체형인식과 더불어 체계적인 영양교육의 필요성을 제시하는 바이다.