• Journal of Preventive Medicine and Public Health
• /
• v.35 no.4
• /
• pp.282-286
• /
• 2002

Objectives : The level of 4-hydroxyproline (4-Hyp) in human urine was measured using high performance liquid chromatography (HPLC) with a fluorescence detector. This method is useful for medical examinations and investigating the radicals induced by physical, chemical, mental stresses. This method is superior to many published several methods in terms of its low cost and ability to analyze many samples. Methods : The urine from workers in a tire manufacturing company (22 male pre- and post-shift workers) and 18 office-workers as controls were analyzed. Data concerning age, the cumulative drinking amount and the cumulative smoking amount was collected with a questionnaire. The optimum applied amount of dansyl-Cl, the optimum reaction temperature and time, the recoveries and the optimum pH of the eluent and buffer were determined.4-Hyp from human urine was derivatized with dansyl-Cl (dimethylamino-naphthalene-1-sulfonyl chloride) after removing the a-amino acid by a treatment with phthalic dicarboxaldehyde (OPA) and cleaned with Bond Elut C18 column. The 4-Hyp derivatives were separated on a reversed phase column by gradient elution with a phosphate buffer (5 mmol, pH 8.0) and acetonitrile, and detected by fluorescence measurements at 340 nm (excitation) and 538 nm (emission). Results : The detection limit for the urinary free 4-Hyp was $0.364{\mu}mol/l$. The recovery rate of 4-Hyp was 99.7%, and the effective pH of the phosphate buffer and borate buffer were 3.0 and 8.0, respectively. From statistical analysis, age, drinking and smoking did not affect the urinary free 4-Hyp in both the controls and workers. The range of urinary 4-Hyp in the controls, pre-shift, and post-shift workers were 0.33-16.44, N.D-49.06, and $0.32-56.27{\mu}mol/l$. From the pared-sample t-test, the urinary 4-Hyp levels in post-shift workers ($11.82{\pm}6.73\;nmmol/mg\;Cre$) were 2-fold higher than in pre-shift workers ($5.36{\pm}5.53\;nmol;/mg\;Cre$) and controls ($4.91{\pm}4.89\;nmol;/mg\;Cre$). Conclusions : This method was developed with high sensitivity, accuracy, and precision. The present method was effectively applied to analyze the urinary free 4-Hyp in both controls and workers.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.4
• /
• pp.291-298
• /
• 2023

In this study, a quantitative analysis method was developed using high-performance liquid chromatography (HPLC) to analyze the content of ceramide NP in lotion, cream, and cleanser formulations in cosmetics. The analysis was performed using a C18 column, and the mobile phase was set at a ratio of 70 : 30 for acetonitrile and methanol, the flow rate was set to 0.8 mL/min, and the column temperature was set to 20 ℃. The method was verified by analyzing specificity, linearity, limit of detection, limit of quantitation, accuracy, and precision in accordance with the ICH guidelines. As a result of validating the method, the linearity of the calibration curve was excellent (R² = 0.99984). The accuracy of the lotion, cream, and cleanser formulations was confirmed with a recovery rate ranging from 95.11% to 100.48%. The precision analysis showed a low relative standard deviation (RSD) of less than 0.26%. The limit of detection was 0.902 ㎍/mL, and the limit of quantitation was 2.733 ㎍/mL. Through this quantitative analysis method of ceramide NP applied in cosmetics, it is expected to assist in the quality control of products by enabling measurement even when it is difficult to separate the main peak due to the influence of interfering substances.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.3
• /
• pp.206-218
• /
• 1984

The gonadal development and gametogenesis of shad, Konosirus, punctatus (TEMMINCK et SCHLEGEL) were studied by comparing with various quantitative indices, such as seasonal changes of gonadosomatic index, fatness, egg-diameter composition, first maturing size, and by comparing with histological changes of gonad and gonadotrophs(GTH) in pituitary. The materials were monthly sampled from Dadaepo at the estuary of the Nakdong river in Korea from September, 1982 to October, 1983. The ovary of shad is a pair of sac-shaped organs revered with a fibromuscular capsule and consisting of numerous sacs. The type of testicular structure is lobular type with development of germ cells, mesenchymal tissue on the lobuli. The gonadosomatic index (GSI) is rather low till March, but increases in April and reaches to peak in June in females and May in males. And it suddenly falls in July. The gonads become active on the increase of water temperature and spawning season ends before high water temperature. After spawning, the small oocytes continue to remain as they are untill the growing period next year. The reproductive cycle includes the successive stages of growing from March to April, mature from April to May, ripe and spawning in June, and recovery and resting from July to February next year. In egg-diameter composition of an ovary taken in the spawning season, 2-3 modes were recognized with some batches shown in an ovary. An individual shad spawns twice or more in a month-spawning season. The individual spawning interval is estimated to be ten days or less. Changes of fatness are corelated with those of water temperature that affect on the condition of feeding, but less corelated with spawning. The percentage of mature of female and male fish, are $50\%$ in 17.0-18.0 cm and $100\%$ in 18.0-19.0 cm. GTH cells are activated from growing period and decrease their activity at pre-spawning season with peak activity for mature period.

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.233-245
• /
• 2021

Many studies on the microstructures in rocks have been conducted using experimental methods with various equipment as well as natural rock studies to see the development of microstructures and understand their mechanisms. Grain boundary migration of mineral aggregates in rocks could cause grain growth or grain size changes during metamorphism or deformation as one of the main recrystallization mechanisms. This study suggests improved ways regarding the analog material experiments with reformed equipment to see sequential observations of these grain boundary migration. It can be more efficient than the existing techniques and carry out an appropriate microstructure analysis. This reformed equipment was implemented to enable optical manipulation by mounting polarizing plates capable of rotating operation on a stereoscopic microscope and a deformation rig capable of experimenting with analog materials. The equipment can automatically control the temperature and strain rate of the deformation rig by microcontrollers and programming and can take digital photomicrographs with constant time intervals during the experiment to observe any microstructure changes. The composite images synthesized using images by rotated polarizing plates enable us to see more accurate grain boundaries. As a rock analog material, norcamphor(C7H10O) was used, which has similar birefringence to quartz. Static grain growth and simple shear deformation experiments were performed using the norcamphor to verify the effectiveness of the equipment. The static grain growth experiments showed the characteristics of typical grain growth behavior. The number of grains decreases and the average grain size increases over time. These case experiments also showed a clear difference between the growth curves with three temperature conditions. The result of the simple shear deformation experiment under the medium temperature-low strain rate showed no significant change in the average grain size but presented the increased elongation of grain shapes in the direction of about 53° regarding the direction perpendicular to the shearing direction as the shear strain increases over time. These microstructures are interpreted as both the plastic deformation and the internal recovery process in grains are balanced by the deformation under the given experimental conditions. These experiments using the reformed equipment represent the ability to sequentially observe changing the microstructure during experiments as desired in the tests with the analog material during the entire process.

• Resources Recycling
• /
• v.33 no.4
• /
• pp.47-61
• /
• 2024

As a recycling technology for recovering zinc contained in large amounts in electric arc furnace dust (EAFD), the most commercialized technology in the world is the Wealz Kiln Process. The Wealz Kiln Process is a process in which components such as Zn and Pb in EAFD are reduced/volatile (endothermic reaction) in high-temperature Kiln and then re-oxidized (exothermic reaction) in the gas phase and recovered in the form of Crude zinc oxide (60wt%Zn) in the Bag Filter installed at the rear end of Kiln. In this study, an experimental Wealz kiln was produced to investigate the optimal process variable value for practical application to the recycling process of large-scale kiln on a commercial scale. Additionally, Pellets containing EAFD, reducing agents, and limestone were continuously loaded into Kiln, and the amount of input, heating temperature, and residence time were examined to obtain the optimal crude zinc oxide recovery rate. In addition, the optimal manufacturing conditions of Pellets (drum tilt angle, moisture addition, mixing time, etc.) were also investigated. In addition, referring to the SiO₂-CaO-FeO ternary system diagram, the formation behavior of a low melting point compound, a reaction product inside Kiln according to the change in the basicity of Pellet, and the reactivity (adhesion) with the castable constructed on the inner wall of Kiln were investigated. In addition, in order to quantitatively investigate the possibility of using anthracite as a substitute for Coke, a reducing agent, changes in the temperature distribution inside Kiln, where oxidation/reduction reactions occur due to an increase in the amount of anthracite, the quality of Crude zinc oxide, and the behavior of tar in anthracite were also investigated.

• Korean Journal of Ichthyology
• /
• v.19 no.1
• /
• pp.8-15
• /
• 2007

The morphology of gonad and reproductive cycle of ribbed gunnel (Dictyosoma burgeri) were investigated on the basis of histological observation. The specimens were monthly sampled in the coastal waters of Jeju from November 2001 to February 2003. The ovaries and testis of this species are categorized as cystovarian and lobule type, respectively. The gonadosomatic index (GSI) of female increased in November and maintained high values from December to February. The GSI of male was similar to that of female although it was decreased in February. The reproductive cycle can be grouped into the following successive stage in the ovary: growth (October to November), mature (November to February), spawning (January to February), and degenerating and recovery (March to September). And in the testis, the stage observed were: multiplication (August to November), growth (November to January), mature and spawning (November to February), and degenerating and recovery (January to September). The minimum maturation size of D. burgeri was over 15.0 cm and fecundity ranged from 2,194 to 6,581 eggs. The relationship between the fecundity and fish body was calculated in the fecundity (F) equation as: $F=0.4057TL^{3.1425}$ ($R^2=0.7621$) for total length (TL); $F=149.88BW^{0.9579}$ ($R^2=0.7982$) for body weight (BW), respectively. The fecundity was correlated positively with TL and BW. The histological observations of the gonads suggested that major spawning of this species probably occurs between January to February, when low water temperature ($13{\pm}0.3^{\circ}C$) period.

• Applied Biological Chemistry
• /
• v.22 no.2
• /
• pp.109-122
• /
• 1979

Present study was carried out to reduce residual toxicity of BHC insecticides inherent in the organochlorine pesticides. For This end, r-isomer, the most potent insecticidal component among the BHC stereoisomers, was isolated and thus fortified by means of solvent precipitation. In parallel, 3-(2,4,5-trichlorophenyl)-1-methyl urea was prepared in good yield from technical BHC via 1,2,4-trichlorobenzene, 1,2,4,-trichloronitrobenzene, and 2,4,5-trichloroaniline. In addition, certain merit of the compound which make it possible to use as a herbicide is discussed. The results are summarized as follows; 1. Recrystallizing technical BHC from methanol-water binary solvent system, r-isomer was enriched to 49.7% at 95% recovery of r-isomer. 2. By partitioning technical BHC in 85% of methanolic solution into chloroform, r-isomer was fortified to 89.6% at 90.5% recovery of r-isomer. 3. Yield of 1,2,4-trichlorobenzene from technical BHC was greatly dependent upon concentration of alkalies and to less degree on the alkalies. 4. Surfactants, in particular cationic a quartenary ammonium salt, increased yield of 1,2,4-trichlorobenzene from technical BHC by alkaline hydrolysis. 5. Conversion of 1,2,4-trichlorobenzene to 2,4,5-trichloronitrobenzene was effected almost quantitatively utilizing $HNO_3-H_2SO_4$ nitrating agent at low temperature. 6. Yield of 91.4% was observed for the synthesis of 2,4,5-trichloroaniline by reducing 2,4,5-trichloronitrobenzene in the presence of iron turning and hydrochloric acid. 7. Overall yield based on BHC of 3-(2,4,5-trichlorophenyl)-1- methyl urea was 60.8%. 8. Inhibition effects, both germination and growth, 3-(2,4,5-trichlorophenyl)-1-methyl urea on several crops were found comparable to or more potent than those of $linuron{\circledR}\;and\;diuron{\circledR}$. In addition, it was also noted that susceptibility to the prepared compound depended upon the crops as well as specific part (shoots, roots) of the plant exposed to the chemicals.

• Journal of the Korean Chemical Society
• /
• v.54 no.5
• /
• pp.556-566
• /
• 2010

A new kinetic spectrophotometric method is developed for the measurement of Mn(II) in natural water samples. The method is based on the catalytic effect of Mn(II) with the oxidation of Gallocyanin by $KIO_4$ using nitrilotriacetic acid (NTA) as an activation reagent at 620 nm. The optimum conditions obtained are $4.00{\times}1^{-5}\;M$ Gallocyanin, $KIO_4$, $1.00{\times}10^{-4}\;M$ NTA, 0.1 M HAc/NaAc buffer of pH = 3.50, the reaction time of 5 min and the temperature of $30^{\circ}C$. Under the optimum conditions, the proposed method allows the measurement of Mn(II) in a range of $0.1\;-\;4.0\;ng\;mL^{-1}$ and with a detection limit of down to $0.025\;ng\;mL^{-1}$. The recovery efficiency in measuring the standard Mn(II) solution is in a range of 98.5 - 102%, and the RSD is in a range of 0.76 - 1.25%. The newly developed kinetic method has been successfully applied to the measurement of Mn(II) in both some environmental water samples and certified standard reference river water sample, JAC-0031 with satisfying results. Moreover, few cations and anions interfere with the measurement of Mn(II). Compared with the other catalytic-kinetic methods and instrumental methods, the proposed kinetic method shows fairly good selectivity and sensitivity, low cost, cheapness, low detection limit and rapidity. It can easily and successfully be applied to the real water samples with relatively low salt content and complex matrices such as bottled drinking water, cold and hot spring waters, lake water, river water samples.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.39-43
• /
• 2017

Purpose Thyroglobulin (Tg) is a biologic marker of differentiated thyroid carcinoma (DTC), produced by normal thyroid tissue or thyroid cancer tissue. Therefore, the Tg values of DTC patients is the most specific indicator for judging whether recurrence occur or whether the remaining thyroid cancer is present. Thyroid cancer is currently the most common cancer in Korea, of which 90% is differentiated thyroid cancer. The number of patients with thyroid disease of this application also increased, and an accurate and prompt results are required. However, the incubation time of the Tg commonly takes about 24 hours in our hospital, and the result reporting time is delayed, and We could not satisfied with the requirements of clinical departments and patients. In order to fulfill these requirements, experiments were conducted by shortening the incubation time between company B's Kit currently in use and company C's Kit used in other hospitals. Through these experiments, we could perform the correlation with the original method and shortening method, and could find the optimum reaction time to satisfy the needs of the departments and the patients, and we will improve the competitiveness with the EIA examination. Materials and Methods In September 2016, we tested 65 patients company B's kit and company C's kit by three incubation ways. First method $37^{\circ}C$ shaking 2hr/2hr, Second method RT shaking 3hr/2hr, Third method 1hr/1hr shaking at $37^{\circ}C$. Fourth method RT shaking 3hr method which is the original method of Company C's Kit. Fifth method, the incubation time was shortened under room temperature shaking 2hr, Sixth method $37^{\circ}C$ shaking 2hr. And we performed and compared the correlation and coefficient of each methods. Results As a result of performing shortening method on company B currently in use, when comparing the Original method of company B kit, First method $37^{\circ}C$ shaking 2hr/2hr was less than Tg 1.0 ng/mL and the ratio of $R^2=0.5906$, above 1.0 ng/mL In the value, $R^2=0.9597$. Second method RT shaking 3hr/2hr was $R^2=0.7262$ less than value of 1.0 ng/mL, $R^2=0.9566$ above than value of 1.0 ng/mL. Third method $37^{\circ}C$ shaking 1hr/1hr was $R^2=0.7728$ less than value of 1.0 ng/mL, $R^2=0.8904$ above than value of 1.0 ng/mL. Forth, Company C's The original method, RT shaking 3hr was $R^2=0.7542$ less than value of 1.0 ng/mL, and $R^2=0.9711$ above than value of 1.0 ng/mL. Fifth method RT shaking 2hr was $R^2=0.5477$ less than value of 1.0 ng/mL, $R^2=0.9231$ above than value of 1.0 ng/mL. Sixth method $37^{\circ}C$ shaking 2hr showed $R^2=0.2848$ less than value of 1.0 ng/mL, $R^2=0.9028$ above than value of 1.0 ng/mL. Conclusion Samples with both values of 1.0 ng/mL or higher in both of the six methods showed relatively high correlation, but the correlation was relatively low less than value of 1.0 ng/mL. Especially, the $37^{\circ}C$ shaking 2hr method of company C showed a sharp fluctuation from the low concentration value of 1.0 ng/mL or less. Therefore, we are planning to continuously test the time, equipment, incubation temperature and so on for the room temperature shaking 2hr method and $37^{\circ}C$ shaking 1hr/1hr of company C which showed a relatively high correlation. After that, we can search for an appropriate shortening method through additional experiments such as recovery test, dilution test, sensitivity test, and provide more accurate and prompt results to the department of medical treatment, It is competitive with EIA test.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.4
• /
• pp.257-267
• /
• 1993

Optimum pasture management during the summer season is an important factor to maintain good regrowth and persistence of pasture. The field experiment was carried out to investigate the effects of cutting management on growth and reserve carbohydrates in stubble. and on dry matter yield of orchardgrass dominated pasture during the mid-summer season. Three different cutting times(July 15, 25 and August 5) as a main plot and three cutting heights(3, 6 and 10cm) as a sub plot were disigned with three replications. The experiment was done at pasture of Changsung Agricultural High School in 1988. The results obtained were summarized as follows: 1. Temperature of soil surface and underground in the cutting of July 15 and July 25 was not showed significantly different, because of low intensity of radiation with a run of wet weather, and that of August 5 cutting tends to be lowed in high cutting height during the mid-summer season. 2. Amount of soil moisture against cutting height showed that high cutting had a low content. 3. Growth rate against regrowth of plant height, lear length and leaf area showed to be fast in high cutting. 4. Rapid recovery period of carbohydrate content after cutting and large amount of carbohydrate accumulation were showed in the cutting of July 15 and 25 compared with August 5 cutting in the reserve carbohydrate content against cutting of time and height during the mid-summer season. 5. Dry matter yield of the 4th and 5th cutting showed to be remarkable in July 15 cutting compared to those of July 25 and August 5. From the above results, it is suggested that the 10cm cutting height during the mid-summer season is the most effective for good regrowth, reserve carbohydrates and dry matter yield of orchardgrass.