• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1039-1041
• /
• 2000

To obtain a high performance in a vector controlled induction machine, it is essential to know the instantaneous position of the rotor flux which depends on the rotor time constant. But the rotor time constant mainly varies due to the temperature rise in the motor winding, so real time compensating algorithm is necessary. This paper proposes that it uses short duration pulses added to the constant flux command current and then resultant torque command current produced by speed controller is utilized for the rotor resistance estimation. This method has advantages with a low computational requirement and does not require voltage sensors. The proposed method is proved by simulations.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.125-132
• /
• 2003

The joint method and characteristics of MC nylon and metal are analyzed. Considering the productivity and economics, two materials are joined with the process of turning, knurling, and induction heating. The joint strength is determined by adhesion of the melted nylon, the size of knurl, and the interference from the difference of the diameters. The adhesion strength of the melted nylon is measured. The effects of the knurl size and diameter difference are analyzed with the statistical methods. Finally the joint strength is analyzed in the environments of low, room, and high temperature. Based on this study, the nylon/metal material is expected to be widely used as the sliding machine elements with good lubrication and strength properties.

• Journal of Powder Materials
• /
• v.8 no.3
• /
• pp.207-209
• /
• 2001

Nano particles have recently been a major research interest, motivated by their unusual physical and chemical properties. Such particles can be synthesized using physical and chemical methods. The physical methods need expensive installation like vacuum induction furnace, whereas in chemical methods the process in generally very simple and low cost. In this study, simple and new fabrication process by using ultrasound was investigated to prepare the nano-sized metal particles on various powders at room temperature.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.2
• /
• pp.69-76
• /
• 2002

To obtain a high performance in a vector controlled induction motor, it is essential to know the instantaneous position of the rotor flux which depends on the rotor time constant. But the rotor time constant mainly varies due to the temperature rise in the motor winding, so real time compensating algorithm is necessary. This paper proposes that it uses short duration pulses added to the constant flux command current and then resultant torque command current produced by speed controller is utilized for the rotor resistance estimation. This method has advantage with a low computational requirement and does not require voltage sensors. The proposed method is proved by simulations and experimentals.

• Journal of Korea Foundry Society
• /
• v.23 no.3
• /
• pp.122-129
• /
• 2003

The abilities and fading behaviors of 5 different inoculants were evaluated by the thermal analyses of the melts which were held at constant temperature after addition in induction furnace. The silicon content was preserved at the high holding temperature of 1,450${\sim}$1,500$^{\circ}C$, which reduced by oxidation at the low one. The inoculation temperature should be higher to obtain better and reproducible result. The inoculation performance of 1%Ba-Fe-Si was the best on the bases of effect and fading behavior.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.252-254
• /
• 2002

Djungarian hamsters show distinct seasonal rhythms in several physiological parameters. One of them is daily torpor that occurs in winter with decreased body temperature (about 1O-20$^{\circ}$C) during daytime. Daily torpor is induced by short-day photoperiod, food restriction and castration. But the mechanism to induce daily torpor has not been clarified. In the present study, we tried to clarify the process of daily torpor induction in detail. Adult male hamsters were kept in long photoperiod and high temperature (LP-HT) before the experiment and, thereafter, the animals were transferred to short photoperiod and low temperature (SP-LT), and they were kept in this condition for about six months. The daily rhythms of locomotor activity and body temperature were recorded every three-minutes by using the Minimitter telemetry system. Locomotor activity and body temperature showed very closely synchronized rhythms. All animals under LP-HT showed daily rhythms with higher locomotor activity and body temperature in nighttime than in daytime. Under SP-LT, there were two types of animals with and without showing daily torpor. Thus, they have individual differences in the response to SP -LT.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.3
• /
• pp.149-156
• /
• 1999

In order to investigate the effect of low temperature pretreatment on pollen dimorphism and embryo formation in anther culture of Platycodon grandiflorum, the anthers with microspore at the uninucleate stage were cultured on Murashige and Skoog medium supplemented with 0.5mg/L NAA and 1.0 mg/L BA. The low temperature pretreatment have clear effect on the frequencies of S pollen grains, symmetrical binucleate microspores (B type of S pollen), multinucleate and multicelled pollen grains. Especially, after low temperature pretreatment at 8$^{\circ}C$ for 5 days increased the frequency of S pollen grain (20.6%) in vivo. In addition, the highest frequency of callus induction (54.9%) and embryo formation (9.9%) were obtained from the anther pretreatment at 8$^{\circ}C$ or 5 days. Three distinct pathways could be recognized in the androgenesis, one involving mainly the vegetative cell, the second starting with the vegetative and the generative cell, respectively, and the third accompaning with two equal vegetative type cells in the pollen grains.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1066-1068
• /
• 1999

Magnetic field is commonly used in low temperature processing plasmas in order to obtain high density. E $\times$ B magnetron or surface multipole configuration were most popular. However, the properties of capacitively coupled rf plasma confined by axially applied static magnetic fields have rarely been studied. In this paper, the effects of magnetic field on the characteristics of 13.56MHz/40KHz argon plasma will be reported. Ion saturation current, electron temperature and plasma potential were measured by Langmuir probe and omissive probe. At low pressure region ($\sim$10mTorr), ion current was increased by a factor of 3 - 4 due to reduction of diffusion loss of charged particles to the wall. It was observed that magnetic field induces large time variation of the plasma potential. The experimental result was compared with particle-in-cell simulation. It was also observed that electron temperature tend to decrease with increasing magnetic induction level for 40KHz discharge.

• Journal of Plant Biology
• /
• v.36 no.2
• /
• pp.133-140
• /
• 1993

The photosynthetic activities in relation to oxygen evolution rates, quantum yield, CO2 uptake rates and room temperature chlorophyll fluorescence were investigated in cotyledons of cucumber seedlings exposed to low temperature (at 4$^{\circ}C$) for 24 h. Light-chilling caused more inhibition on light-saturated maximum oxygen evolution rates, quantum yield, and CO2 uptake rates than dark-chilling did in the cucumber plant. Light-chilling induced more marked increase in Fo and decrease in (Fv)m/Fm than dark-chilling did in the room temperature chlorophyll induction kinetics. The above results affected by chilling in the light are considered to be associated with the partial damage of the reaction center of PS II and the decreased photosynthetic activities. There occurred a large decrease in qQ with little change in qNP in the light-chilling plant. When light- and dark-chilled plants were recovered at room temperature for 24 h and their chlorophyll fluorescences were induced with light doubling technique, light-chilled plants showed more smaller magnitude and rate of fluorescence relaxation than dark-chilled plants. These suggest that light-chilling might cause some alterations in transthylakoid pH formation, and that photosynthetic apparatus of cucumber cotyledons is more susceptible to light-chilling. In the fast fluorescence induction kinetics, FR was decreased by 60% in the light-chilled plants with reference to $25^{\circ}C$ light-grown plants, while the dark-chilled plants showed a decreased rate of only 20% with reference to $25^{\circ}C$ dark-treated plants for 24 h, indicating that cucumber seedling is very sensitive to chilling stress. So, it is certain that chilling injury to the photosynthetic apparatus is strongly dependent on the presence of light in cucumber seedlings.

• The KSFM Journal of Fluid Machinery
• /
• v.3 no.4 s.9
• /
• pp.22-29
• /
• 2000

Numerical analysis using three dimensional finite volume method for the discretization, adaptive grid method for the numerical accuracy, multiple rotating frame method for the rotating body and the standard $k-{\epsilon}$ model for the turbulent flow was performed to understand the heat transfer phenomena and to improve the efficiency of the scroll compressor. The temperature measurement was carried out under ARI condition. It was found that the fluid temperature in the compressor was predicted accurately while the temperature of the motor coil showed large discrepancy between the calculation and experiment due to the large anisotropy of the conductivity and non homogeneity. We found that the efficiency of the compressor depends on the inlet temperature of the compressing part and the flow pattern around the inlet region of the compressing part influences the inlet temperature due to high surface temperature of the main frame. The efficiency of the compressor using Coanda effect is higher than the previous one because the smooth suction at the inlet region of the compressing part leads to low heat transfer to the refrigerant of the compressor.