• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.3059-3064
• /
• 2013

In this study transesterification of Triglycerides (TG) from Jatropha curcas oil (JCO) with methanol for production of biodiesel was investigated over cerium impregnated ZSM-5 catalysts. NaZSM-5 was synthesized in an alkaline medium and impregnated with cerium oxide by wet method using cerium nitrate as a source for cerium. They were characterized by X-ray diffraction (XRD), Thermogravimeteric analysis (TGA), $CO_2$-temperature programmed desorption, and $N_2$ adsorption/desorption analysis. XRD analysis showed decrease in intensity of the patterns with the increase in the ceria loading but crystallization of ceria to larger size is an evident for 10 and 15% loading. The optimal yield of transesterification process was found to be 90% under the following conditions: oil to methanol molar ratio: 1:12; temperature: $60^{\circ}C$; time: 1 h; catalyst: 5 wt %. Here the yield of fatty acid methyl ester (FAME) was calculated through $^1H$ NMR analysis. The investigation on catalyst loading, temperature, time and reusability illustrated that these ceria impregnated NaZSM-5's were found to be selective, recyclable and could yield biodiesel at low temperature with low methanol to oil ratio due to the presence of both Lewis and Bronsted basicity. Hence, from the above study it is concluded that ceria impregnated ZSM-5 could be recognized as a potential catalysts for biodiesel production in industrial processes.

• 한국재료학회지
• /
• 제30권12호
• /
• pp.655-659
• /
• 2020

Hydrogen isotopes (i.e. deuterium and tritium) are supplied to the tokamak in the International Thermonuclear Experimental Reactor (ITER) fuel cycle. One important part of the ITER fuel cycle is the recycling of unused fuel back to the tokamak, as almost 99 % of fuel is unburned during fusion reaction. For this, cryogenic distillation has been used in the isotope separation system (ISS) of ITER, but this technique tends to be energy-intensive and to have low selectivity (typically below 1.5 at 24 K). Recently, efficient isotope separation by porous materials has been reported in the so-called quantum sieving process. Hence, in this study, hydrogen isotope adsorption behavior is studied using chemically stable ZIF-11. At low temperature (40 K ~ 70 K), the adsorption increases and the sorption hysteresis becomes stronger as the temperature increases to 70K. Molar ratio of deuterium to hydrogen based on the isotherms shows the highest (max. 14) ratio at 50 K, confirming the possibility of use as a potential isotope separation material.

• 한국재료학회지
• /
• 제9권8호
• /
• pp.817-824
• /
• 1999

$Al_2$$O_3$-SiC 화합물 분말이 $SiO_2$, A1 그리고 C 분말들을 원료분말로 하여 SHS(self-propagating High-temperature Synthesis)법에 의해 제조되었다. 원료 분말에서의 몰비, 성형압력, 반응물의 초기온도의 영향이 생성물과 연소과정에 대해 연구되었다. $SiO_2$/A1/C계의 자전연소합성은 낮은 연소온도 때문에 $400^{\circ}C$ 이상으로 예열되어야 한다. 연소반응의 결과로서 최종생성물의 순도는 반응물의 순도보다 높았다. 이 계에서 $SiO_2$:Al:C의 적당한 몰비는 3.0:4.0:6.0이었고, free carbon은 30min 동안 $650^{\circ}C$에서 배소함으로써 제거되었다. 본 연구에서 상압소결은 $1700^{\circ}C$에서 powder bed를 사용한 표본의 분해를 제어하고 치밀한 소결체를 얻는데 매우 효과적이었다. hot-pressing으로 생성된 소결체는 이론비교밀도의 약 98%이었다.

• 공업화학
• /
• 제28권5호
• /
• pp.559-564
• /
• 2017

본 연구에서는 폐식용유를 이용한 바이오디젤 제조공정에 반응표면분석법 중 중심합성계획모델을 이용하여 최적화 과정을 수행하였다. 공정변수로는 폐식용유의 산가, 반응시간, 반응온도, 메탄올/유지 몰비, 촉매량 등을 선택하였고, 반응치로는 FAME 함량(96.5% 이상) 및 동점도(1.9~5.5 cSt)를 설정하였다. 기초실험을 통해 계량인자범위를 반응시간 (45~60 min), 반응온도($50{\sim}60^{\circ}C$), 메탄올/유지 몰비(8~12)로 정하고, 중심합성계획모델을 이용한 최적화 결과 바이오디젤의 제조공정의 최적조건은 반응시간 55.2 min, 반응온도 $57.5^{\circ}C$, 메탄올/유지 몰비 10으로 나타났다. 이 조건에서 바이오디젤의 예측 FAME 함량은 97.5%, 동점도는 2.40 cSt이었으며, 실제 실험을 통해 확인한 결과 FAME 함량(97.7%), 동점도(2.41 cSt)로 측정되어 오차율은 각각 0.23, 0.29%로 나타났다. 따라서 폐식용유 원료 바이오디젤 제조공정 최적화 과정에 반응표면분석법 중 중심합성계획모델을 적용할 경우 매우 낮은 오차율을 얻을 수 있었다.

• 한국토양비료학회지
• /
• 제44권4호
• /
• pp.527-533
• /
• 2011

Decomposition of compost applied to soils is affected basically by its biological stability; but, many other chemical properties of the compost may also influence compost organic-C mineralization. This study was conducted to investigate the principal substrate quality factors of composts that determine C mineralization of compost with similar stability degree (SD). Three composts samples with similar SD but different chemical properties such as pH, C/N, $K_2SO_4$-extractable C, and molar ratio of $NH_4^+$ to $NO_3^-$ were mixed with an acid loamy soil and $CO_2$ emission was monitored during the laboratory incubation for 100 days. Temporal pattern of cumulative compost organic-C mineralization expressed as % of total organic C ($C_{%\;TOC}$) followed double exponential first order kinetics model and the $C_{%\;TOC}$ ranged from 4.8 to 11.8% at the end of incubation. The pattern of C%TOC among the composts was not coincident with the SD pattern (40.1 to 58.6%) of the composts; e.g. compost with the lowest SD resulted in the least $C_{%\;TOC}$ and vice versa. This result indicates that SD of compost can not serve as a concrete predictor of compost mineralization as SD is subject not only to maturity of compost but also to characteristics of co-composting materials such as rice hull (low SD) and sawdust (high SD). Meanwhile, such pattern of $C_{%\;TOC}$ collaborated with pH, C/N, $K_2SO_4$-extractable C, and molar ratio of $NH_4^+$ to $NO_3^-$ of the composts that are regarded as chemical indices of the progress of composting. Therefore, for better prediction of compost mineralization in soils, it is necessary to consider both SD and other chemical indices (pH, C/N, and molar ratio of $NH_4^+$ to $NO_3^-$).

• 한국응용과학기술학회지
• /
• 제38권6호
• /
• pp.1561-1567
• /
• 2021

지르코니아 복합체는 지르코니아 전구체, 알루미나 전구체, 그리고 유기 실란의 혼합물을 플라스틱 기판 위에 코팅하여 졸 겔 공정과 저온의 광경화 과정, 그리고 열처리 공정 등 세 단계를 거쳐 합성하였고, FT-IR과 XPS 분석을 통하여 지르코니아 전구체와 알루미나 전구체의 비율에 따라 합성된 복합체내 Zr 원소와 Al 원소 비율이 일치함을 확인하였다. 코팅된 복합체는 파장이 420 nm 이상인 가시광선 영역에서 96 % 이상의 투과도를 보였고, 기계적 강도는 연필 강도 9H 이상을 나타내었다. 특히 지르코니아와 알루미나의 몰 비가 1:4의 비율의 복합 코팅제의 나노 압입 경도가 1.212 GPa로 가장 높은 것으로 확인되었다.

• 한국결정성장학회지
• /
• 제14권6호
• /
• pp.267-271
• /
• 2004

우레아 가수분해법을 이용하여 리튬이차전지용 $LiCoO_2$ 양극 분말을 합성하였다. Li/Co 몰비가 다르고 가수분해에 의해 얻어진 전구체는 다양한 온도에서 열처리되었다. 저온상 $LiCoO_2(LT-LiCoO_2)$와 고온상 $LiCoO_2(HT-LiCoO_2)$는 $500^{\circ}C$에서 2시간 열처리 후 합성되었고, 저온상에서 고온상으로 상전이는 $700^{\circ}C$ 이상에서 완전히 일어났다. 열처리 온도가 증가함에 따라 $LiCoO_2$의 층상구조가 잘 발달하였다. 충방전 실험결과 Li/Co의 몰비가 1.2이고 $800^{\circ}C$에서 열처리한 $LiCoO_2$의 초기용량이 152 mAh/g으로 높았으며, 40회 충.방전 후에는 9.2%의 용량감소를 나타내는 상대적으로 안정한 충방전 특성을 나타내었다.

• Toxicological Research
• /
• 제11권2호
• /
• pp.215-221
• /
• 1995

This paper examines the effects of dietary polyunsaturated fatty acid/saturated fatty acid (p/s) ratios and butylated hydroxytoluene (BHT) on the hepatic microsomaI mixed-function oxidase sy. stem in 2~acetylaminofiuorene (2-AAF) treated rats. Sprague-Dawley male rats were fed the diet of beef tallow (p/s 0.08), beef tallow plus soybean oil (p/s 1.0), and soybean oil (p/s 4.0) at the level of 15%fat and with or without 0.3% BHT. After 2-AAF was injected twice at the ages of 23 and 27 weeks, cholesterol/phospholipid molar ratio, thiobarbituric acid reactive substances (TBARS) level, cytochrome P450, cytochrome $b_5$, NADPH-cytochrome $b_5$, and NADPH-cytochrome c reductase activity were measured from isolated hepatic microsomal fractions. In the beef tallow (p/s 0.08) and beef tallow plus soybean oil (p/s 1.0) groups, cholesterol/phospholipid molar ratio showed decreasing tendency by 2-AAF and BHT. Cytochrome P-450 content was decreased in the group of soybean oil (p/s 4.0) and NADPH-cytochrome c reductase activity was increased by 2-AAF and BHT in all the dietary groups. While TBARS levels were increased by 2-AAF in all the dietary groups, they were reduced by BHT in the soybean oil (p/s 4.0) group. These results suggest that long term intake of soybean oil (p/s 4.0) diet induced changes in the nature of microsomal membrane and induced less cytochrome P-450, low level feeding of BHT increased cytochrome c reductase activity and lowered microsomal lipid peroxidation levels, which were increased by 2-AAF treatment.

• Journal of the Korean Wood Science and Technology
• /
• 제20권4호
• /
• pp.73-84
• /
• 1992

It was observed that the hot-water extract of the bark of Kalopanax pictus N. had the highest anti-complementary activity among the 11 kinds of forest materials. Methanol-and ethanol-soluble portions had low anti-complementary activities, but crude polysaccharide. HKP-0 had a high activity of 80%. HKP-0 contained 54.8% of total sugar and 27.9% of protein. The neutral sugars of HKP-0 consisted of mainly arabinose, galactose and glucose. HKP-4 fraction obtained by cetavlon treatment of HKP-0 showed the highest anti-complementary activity of 90%. The activity was not changed by pronase digestion bu decreased greatly by periodate oxidation. HKP-4 consisted of mainly arabinose and glucose with molar ratio of 1.0 : 22.4, HKP-4-I, an unabsorbed fraction from HKP-4 on DEAE Sepharose CL-6B column showed higher yield and activity than those of absorbed fractions. HKP-4-I was homogeneous, and its molecular weight was about 25,000. HKP-4-I contained 84.0% of neutral sugar and consisted of arabinose and glucose with molar ratio of 1.0 : 11.2. The anti-complementary activity of HKP-4-I was not decreased by the treatment of polymyxin B, and the polysaccharide activated both classical and alternative pathway in complement system. Void volume fraction obtained from HKP-4-I hydrolyzed with ${\alpha}$-amylase on Sephadex G-25 column only had a high anti-complementary activity.

• 한국분말재료학회지
• /
• 제18권3호
• /
• pp.283-289
• /
• 2011

Magnesium hydroxide sulfate hydrate whiskers ($5Mg(OH)_2{\cdot}MgSO_4{\cdot}3H_2O$, abbreviated 513 MHSH) were prepared using hydrothermal reaction with magnesium oxide (MgO) and magnesium sulfate ($MgSO_4{\cdot}7H_2O$) as the starting materials. The effects of the molar ratio of $MgSO_4$/MgO and amount of $NH_4OH$ were studied. As a result, 513 MHSH whiskers co-existed with hexagonal plate $Mg(OH)_2$ at low concentration of $SO_4^{2-}$. The molar ratio of $MgSO_4{\cdot}7H_2O$/MgO was 7:1, uniform 513 MHSH whiskers were formed without impurity such as $Mg(OH)_2$. Appropriate amount of $NH_4OH$ has affected to formation of high quality MHSH. Their morphologies and structures were determined by powder X-ray diffraction (XRD) scanning electron microscopy (SEM) and thermo-gravimetric analyzer (TGA).