• 제목/요약/키워드: low-heat generating cement

검색결과 4건 처리시간 0.016초

저발열 결합재 및 W/B 변화에 따른 저열콘크리트의 공학적 특성 (Engineering properties of low heat concrete depending On low heat binder and the change in W/B)

  • 곽용진;손호정;김경민;박상준;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2012년도 춘계 학술논문 발표대회
    • /
    • pp.69-70
    • /
    • 2012
  • This paper is to investigate the engineering properties of the concrete incorporating different types of low heat generating binders subjected to various W/B. As expected, it is found that increase of W/B resulted in a decrease of hydration heat and compressive strength. It also showed that the application of high early strength and low carbon type mixture had favorable strength development at early and later age, while hydration heat showed rather higher than existing low heat mixture.

  • PDF

환원슬래그를 사용한 모르타르의 저온에서의 초기동해 방지에 관한 기초적 실험 (A Fundamental Experiment on Preventing Frost Damage at Early Age of Mortar in Low Temperature using Reduction Slag)

  • 민태범;문영범;김형철;최현국;김재영;이한승
    • 한국건축시공학회지
    • /
    • 제16권1호
    • /
    • pp.1-7
    • /
    • 2016
  • 본 연구에서는 $-5^{\circ}C$이하에서도 가열 양생이 없이 수화 반응시 수화열이 높게 발생되는 환원슬래그를 시멘트 분체와 치환사용 하여 영하의 온도에서도 콘크리트의 자체 발열로 인해 압축강도를 재령 3일 이내 5MPa를 발현시켜 초기동해를 방지시키는 것이 최종 연구의 목적이며 이에 대하여 환원슬래그의 물리적 특성 평가와 열적 특성 평가를 실시한 결과 환원슬래그는 높은 수화열을 발생시키기 때문에 저온에서도 압축강도 발현이 우수함을 알 수 있었다. 이는 환원 슬래그의 성분 중 $C_{12}A_7$$C_3A$에 의해 수화열이 높게 발생됨 저온에서도 압축강도가 발현되는 것으로 나타났다. 하지만 환원슬래그 단독 치환하였을 경우 $SO_3$함량 부족으로 급결이 발생하는 것을 알 수 있었다. 급결을 방지하기 위해서는 석고의 사용이 필수적으로 사용되어야 한다. 따라서 본 연구 결과 환원슬래그와 석고를 3성분계로 사용하였을 경우 저온에서도 재령 3일에서 5MPa 압축강도를 나타나는 것으로 보아 저온에서도 콘크리트의 초기동해를 방지할 수 있을 것으로 판단된다.

환원슬래그를 사용한 모르타르의 저온에서의 초기동해 방지에 관한 연구 (The Study of Experiment on Preventing Frost Damage at Early Age of Mortar in Low Temperature using Reduction Slag.)

  • 김형철;최현국;민태범
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2016년도 춘계 학술논문 발표대회
    • /
    • pp.203-204
    • /
    • 2016
  • In this research, it used cement power and reduction slag, which generates high hydration heat in hydration reation without heat cure below -5℃ degree. Purpose of final research is preventing freezing and thawing by making the compressive strength 5MPa in 3days below zero temperature due to own heat of concrete. and it is the result of physical characteristic and thermal property evaluation of reduction slag. Because reduction sag generates high hydration heat, compressive strength development is excellent. By generating highly Hydration heat by C12A7 and C3A in reduction slag, compressive strength is developed in low temperature. In case of displacing only reduction slag without SO3, it is indicated that quick-setting occurs by shortage of SO3. For preventing quick-setting, gypsum is used essentially. According to this research result, in case of using reduction slag and gypsum as a ternary system, Compressive strength developed 5MPa in 3days below zero temperature. It is identified to prevent early frost damage of concrete below zero temperature.

  • PDF

폐CNT와 전도촉진재를 혼입한 시멘트 모르타르 블록의 발열 전도 특성 (Heating Transferring Charcteristics of Cement Mortar Block with Waste CNT and Conduction Activator)

  • 구현철;김운학;오홍섭
    • 한국건설순환자원학회논문집
    • /
    • 제10권2호
    • /
    • pp.176-183
    • /
    • 2022
  • 저전력 사용이 가능한 발열콘크리트를 제작하기 위하여 시멘트 모르타르에 고순도 폐CNT를 혼입하였으며, 모르타르의 전도율을 향상시키기 위하여 압축강도를 제어하는 수준에서 탄소섬유와 폐음극재를 활용하고자 하였다. 사용된 폐CNT는 다중벽 CNT의 함유량이 많은 것으로 분석되었고, 모르타르 배합시 분산성을 높이기 위하여 액상형으로 치환하여 사용하였다. 모르타르 발열시 태양광 등에 의한 소형 자가발전 설비를 활용하고 전자파를 최소화하기 위하여 DC 24 V이하의 전력 사용시의 모르타르의 온도 변화를 평가하였다. 액상형 폐CNT를 적용하고, DC 24 V의 전압을 도입한 경우 200 × 100 × 50 mm 블럭 시험편에서 60 ℃까지 상승하였으며, 액상형 폐CNT와 탄소섬유, 폐음극재를 모두 사용한 경우에는 DC 12 V에서도 55 ℃이상까지 온도가 상승하여 현장 적용성이 충분한 것으로 판단되었다. 특히 발열에너지 변화량에 있어서도 다른 변수들과 비교하여 효과적인 것으로 나타났다.