• 보존과학회지
• /
• 제38권4호
• /
• pp.301-313
• /
• 2022

We made a Korean white porcelain or Joseon Baekja jar and based on the raw materials used and reproductions of each stage, we aimed to compare and analyze the physicochemical changes of the raw materials such as clay at each manufacturing stage, as well as identify the characteristics and correlations. Although the basic main components of clay and glaze material are similar, their texture becomes denser in the process of bisque firing pottery (Chobeol-pyeon) and glaze firing pottery (Jaebeol-pyeon), and we confirmed that in addition to the tendency of increasing vitrification, low-temperature minerals such as mica and illite gradually disappeared, while high-temperature minerals such as cristobalite were newly created. This phenomenon has also been verified by the rapid decrease in absorption rate while the change in specific gravity was small. In addition, the color was greatly affected by the firing atmosphere, and the yellow-red chromaticity of the raw materials was higher during bisque firing but showed a rapidly decreasing characteristic during glaze firing. The value of magnetic susceptibility, which is related to iron (Fe) component, showed a tendency to decrease in glaze firing pottery. CT images were confirmed as a method that can indirectly estimate the change in the material properties of the object step-by-step for the entire object. In conclusion, the study of manufacturing stages of reproduction can provide basic data for scientific research on the estimation of porcelain and pottery making technology and changes in raw materials.

• 동굴
• /
• 제82호
• /
• pp.5-7
• /
• 2007

In this paper, p-n junction formation using screen-printed metalization and co-firing is used to fabricate high-efficiency solar cells on single- crystalline silicon substrates. In order to form high-quality contacts, co-firing of a screen-printed Ag grid on the front and Al on the back surface field is implemented. These contacts require low contact resistance, high conductivity, and good adhesion to achieve high efficiency. Before co-firing, a statistically designed experiment is conducted. After the experiment, a neural network (NN) trained by the error back-propagation algorithm is employed to model the crucial relationships between several input factors and solar cell efficiency. The trained NN model is also used to optimize the beltline furnace process through genetic algorithms.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.187-188
• /
• 2000

The conventional firing process method for the transparent dielectric layer in PDP Technology has disadvantages of low through put, high power consumption and large process area. We propose the rapid thermal scinterring (RTS) method as new process method to overcome these disadvantage characteristics. As the experimental result of this method, the optic transmittance(wavelength : 600nm) rate of transparent dielectric layer was more improved than conventional furnaces under the optimized gas supplying. Further, it was certified this method had the best conditions on the firing process of the PDP transparent dielectric layer.

• 한국재료학회지
• /
• 제13권3호
• /
• pp.160-168
• /
• 2003

The co-firing processes for the supported type planar solid oxide fuel cell were investigated. A flat cell of $7.7${\times}$10.8\textrm{cm}^2$ was fabricated successfully by the co-firing process, in which green films were co-sintered in the forms of two layers of anode/electrolyte or of three layers of anode/electrolyte/cathode with gas distributor. A co-fired cell of two layers yielded a power of 200 ㎽/$\textrm{cm}^2$ at 608 ㎷. Its performance loss was mainly due to iR drop in the anodic gas distributor, which was attributed to poor contact between anodic gas distributor and current collector. The performance in the co-fired cell of three layers was much lower than that of two layers, which resulted from the large iR drop and activation overvoltage at the cathodic side. In the co-fired cell of two layers, the impedance analysis indicated that the performance decay during cell operation is due to both anode overvoltage and iR drop at anode side. Also the electrode reaction of the co-fired two layers' cell is considered to be controlled by activation overvoltage within the low current of 50 ㎃.

• 한국재료학회지
• /
• 제9권5호
• /
• pp.441-445
• /
• 1999

Alkaline earth metal oxides were added to the conventional MgO films as a protective layer for dielectric materials to have lower firing voltage(Vf) of the plasma display panel(PDP). Panels with various protective layers of MgO-alkaline earth metal oxides were prepared on glass by using e-beam evaporation and its effect on firing voltage characteristics were investigated. (Ba-Mg)O films had poor voltage characteristics because of higher activation energy of BaO. But, (Sr-Mg)O, (Ca-Mg)O and (Ca-Sr-Mg) O had better voltage characteristics than the conventional MgO. A mixture film of (Mg-Ca-Sr)O show the lowest firing voltage which is less than that of MgO by 20V. The chemical composition to have lowest firing voltage is MgO:SrO:CaO ratio of 6:2:2. The mixture of MgO-Alkaline earth metal oxides films showed good transmittance properties within the visual range.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.66-70
• /
• 2010

우주발사체용 75톤급 액체로켓엔진 연소기의 저압연소시험에서 얻은 데이터를 기본으로 75톤급 연소기의 연소특성속도 및 비추력을 예측하였다. 75톤급 연소기 저압연소시험에서 연소특성속도는 약 1750 m/sec, 비추력은 240 sec로 30톤급 연소기의 저압 성능보다 높은 값을 보여주었다. 30톤급 연소기의 연소시험에서 얻은 저압/고압 관계식을 통해 75톤급 연소기의 설계점에서 연소특성속도는 약 1770 m/sec, 비추력은 약 278 sec로 목표치를 상회하는 값을 예측하였다.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.615-620
• /
• 2009

The present research was performed to determine the optimal firing condition and holding time for malayaite crystal, which is responsible for the stable pink-red coloration in glaze at high temperatures, using Cr$Cl_3$ as chromophore for the synthesis of $Cr_2O_3-SnO_2-CaO-SiO_2$ system pigments. The malayaite crystal was influenced by the raw materials used for synthesis, firing temperature, and holding time. Thus there are differences in the crystal phase and in the coloration according to the condition of synthesis. When Cr$Cl_3$ was used as chromophore, the pigment could be synthesized at lower temperatures, because Cr$Cl_3$ melts at $1500{^{\circ}C}$, which is much lower than the temperature at which $Cr_2O_3$ melts (higher than $2435{^{\circ}C}$). And the employed Cr ion showed a change in oxidation state. When a mineralizer was used to improve the employment of malayaite and the Cr ion, and the low temperature was maintained at which the malayaite crystal is produced, the production of malayaite crystal was promoted and the employment of chromophore was also promoted in the oxidation state of Cr (IV). The results of the experiment showed that the optimal firing condition was 18 h of holding time at $800{^{\circ}C}$, using Cr$Cl_3$ as chromophore, followed by 2 h at the raised temperature of $1150{^{\circ}C}$. The change in coloration of the Cr (IV) employed by malayaite showed a very rich color of red. Thus it was possible to effectively synthesize sphene-pink pigments with more red tint at a low temperature.

• 한국광물학회지
• /
• 제27권2호
• /
• pp.63-72
• /
• 2014

본 연구에서는 경상남도 창녕군 창녕읍 교리 고분군 일대에서 발견된 5세기~6세기 초반 무렵의 삼국시대 토기를 대상으로 암석학적 연구방법을 적용하여 광물학적 특징과 소성온도 및 환경을 추정하였다. 이를 위하여 광물학적 동정과 미세조직관찰, 화학성분 분석 등의 다양한 기법을 적용하여 암석광물학적 분석을 시행하였다. 편광현미경 하에서 토기 시료들을 관찰한 결과 석영, 장석류가 주구성 광물이었으며, 그 외에도 규장질 화산암(felsic volcanics), 비짐(temper), 저급점토에 주로 함유되는 불투명광물 등이 관찰되었다. XRD와 FTIR을 통해 현미경으로 볼 수 없었던 멀라이트, 적철석, 스피넬 등이 관찰되었다. 조사된 토기시편에서 보이는 흐름선과 색이 다른 기질이 혼재는 두 가지 이상의 점토를 사용하였거나 반죽과정에서 생긴 것으로 보인다. 소성온도가 $1,200-1,300^{\circ}C$로 제작된 토기에서 관찰되는 일반적인 석기의 특징은 보이지 않으나 다소의 기공이 존재하고 석영을 비롯한 특정 광물들의 결정이 남아 있는 것으로 보아 소성온도는 $1,000^{\circ}C$ 정도에서 소성되었을 것이라 추정된다. 고온광물인 멀라이트가 토기의 내부보다는 외곽부나 균열 부근에서 주로 관찰되며 토기 내외부의 산화정도가 다른 것은 균질한 소성환경이 조성되지 않았음을 의미한다. 대부분의 시료에서 규장질 화산암편이 관찰되고 일부 시료에서 크리스토발라이트가 관찰되는데, 크리스토발라이트의 형성온도가 일반적으로 1,470^{\circ}C$ 이상임을 감안하면 소성 시 생성된 것이 아니라 원래의 태토 내에 포함되어 있던 것으로 추정된다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.244-249
• /
• 2004

Experiments were performed to investigate the characteristics of combustion of 7MW-3 air stages combustion system for a heavy oil firing boiler. Several fuel nozzles were developed for the purpose of lowering pollutions in another institute and ${\Phi}$-jet nozzle among them was equipped to the combustion system. A variety of combustion phenomena were observed as air stage ratio, air fuel ratio and load are changed for each nozzle. Main combustion characteristics are shape of flame, NOx and CO generations, smoke scale number. Through lots of adjustments, the combustion system reaches such goals as the low NOx of 160 ppm, CO of 300 ppm corrected at $O_2$ of 4% and dust of 150 mg/Sm3.

• 한국세라믹학회지
• /
• 제30권10호
• /
• pp.845-851
• /
• 1993

Low firing temperature substrate were synthesized through tape casting and sintering of glass with cordierite composition and then their properties were investigated. Even though the dielectric properties and XRD patterns of substrates, obtained by tape casting and sintering at 900~100$0^{\circ}C$ for various periods, were similar to those of substrates obtained by dry pressing, the sinterability was enhanced. The substrates were thin and the size was 0.6$\times$50$\times$50mm. From the results of dielectric properties, the sinterability and X-ray diffraction pattern, the proper condition for cofiring process with conductor, Cu, was 90$0^{\circ}C$ for 1h. The properties of the substrate are as follows; the dielectric constant was 5.31(at 1MHz), the dissipation factor was 0.0028, the apparent porosity was 0.28% and the main crystalline phase was $\alpha$-cordierite.