• 한국자기학회지
• /
• 제19권2호
• /
• pp.67-73
• /
• 2009

지하에 존재하는 빈 공간이 지상에서의 자속밀도 변화에 미치는 영향을 땅의 밀도와 측정높이에 따른 변화의 차이로 분석하였다. 밀도가 다른 지표면과 함몰지 및 지하터널이 있는 지표면에 대한 지자기의 자속밀도 분포를 플럭스게이트형 마그네토미터를 사용하여 조사하였다. 지하의 밀도가 감소하거나 빈 공간이 존재하면 지상에서의 자속밀도가 감소하는데, 경계에서부터 서서히 감소하여 중심부에서 가장 낮은 자속밀도를 나타낸다. 빈 공간에 의한 자속밀도의 감소는 지하 80m에 위치한 터널에 의해서도 관찰된다. 이러한 자속밀도 감소현상을 이용하면 지하의 천부에 존재하는 빈 공간, 저밀도 지역, 파쇄대 및 함몰지를 탐사할 수 있을 것으로 보인다.

• Journal of Welding and Joining
• /
• 제33권5호
• /
• pp.31-34
• /
• 2015

Microstructure and tensile property in the weld heat-affected zone (HAZ) of austenitic Fe-Mn-Al-C low density steels were investigated through transmission electron microscopy analysis and tensile tests. The HAZ samples were prepared using Gleeble simulation with high heat input welding condition of 300 kJ/cm, and the HAZ peak temperature of $1200^{\circ}C$ was determined from differential scanning calorimetry (DSC) test. The strain- stress responses of base steels showed that the addition of V improved the tensile and yield strength by grain refinement and precipitation strengthening. Tensile strength and elongation decreased in the weld HAZ as compared to the base steel, due to grain growth, while V-added steel had a higher HAZ strength as compared than V-free steel.

• 한국가구학회지
• /
• 제20권4호
• /
• pp.281-289
• /
• 2009

This research examined the technical feasibility of composite that had two layers of fiberglass reinforcement to enhance the load carrying capacity of lumber. Specimens were prepared from standard lumber made of thinning crop trees such as Larix kaempferi, Pinus koraiensis, and P. rigida. Results indicated that bending properties, hardness, and wood screw withdrawal load of low density lumber from the P. koraiensis increased as the number of layers of fiberglass reinforcement increased. Composite produced by VARTM method showed the MOE increased in all specimens, while the MOR differed on the location, whether the 2-layers of FRP is put on tensile zone or compressive zone. The MOR of high density lumber from Larix kaempferi and P. rigida decreased when they placed into tensile zone, but low density lumber from P. koraiensis increased in same location. The bending toughness only increased high density lumber of Larix kaempferi as the number of layers of fiberglass reinforcement increased. The technique developed by this study may increase an opportunity to use small diameter log with low density for commercial purposes.

• 한국농공학회논문집
• /
• 제56권6호
• /
• pp.149-158
• /
• 2014

The effects of spot cooling on growing ever-bearing strawberry in hydroponic cultivation during summer by spot cooling system was estimated in plastic greenhouse located in Pyeongchang. The temperature of cooling water was controlled by heat pump and maintained at the range of $15{\sim}20^{\circ}C$. Cooling pipes were installed in root zone and very close to crown. Spot cooling effect was estimated by applying system in three cases which were cooling root zone, crown plus root zone, and crown only. White low density polyethylene pipe in nominal diameter of 16 mm was installed on crown spot, and Stainless steel flexible pipe in nominal diameter of 15A was installed in root zone. Crown and root zone cooling water circulation was continuously performed at flowrates of 300 ~ 600 L/hr all day long. Strawberry yields by test beds were surveyed from Aug. 1 to Sep. 30. The accumulated yield growth rate compared with a control bed of crown cooling bed was 25 % and that of crown plus root zone cooling bed was 25 % and that of root zone cooling bed was 20 %. The temperatures of root spot in root zone cooling was maintained at $18{\sim}23.0^{\circ}C$ and that of crown spot in crown cooling was maintained at $19{\sim}24^{\circ}C$. Also, the temperatures of root spot in crown plus root zone cooling bed was maintained at $17.0{\sim}22.0^{\circ}C$ and that of crown spot was maintained at $19{\sim}25^{\circ}C$.

• 한국패류학회지
• /
• 제28권1호
• /
• pp.29-35
• /
• 2012

Growth patterns of the Manila clam, Ruditapes philippinarum in each tidal level were studied in the intertidal zone in Tae-an on the west coast of South Korea from April to August 2009. Environmental factors and the specimens of R. philippinarum were monthly collected at three intertidal locations: low intertidal zone, low-middle intertidal zone and middle intertidal zone. Temperature of sediment in low intertidal zone were lower than those in other intertidal locations. Concentrations of Chl-${\alpha}$ were not significantly different between in each tidal level. Exposure hours in low intertidal zone were shorter than those in other intertidal locations. Density of each year class in low intertidal zone were higher than those in low-middle intertidal zone and middle intertidal zone. Growth factors of R. philippinarum in low intertidal zone were better than those in other intertidal locations. The growth rate of under one year class individuals of low intertidal zone were higher than those in low-middle intertidal zone and middle intertidal zone, before the main recruitment period of R. pilippinarum. Although the growth patterns of R. philippinarum may be affected by various environmental factors, we suggests that the exposure duration is the main affect in the growth patterns of R. philippinarum in intertidal zone.

• 한국해양환경ㆍ에너지학회지
• /
• 제4권2호
• /
• pp.15-24
• /
• 2001

Huang 등[1996]이 제안한 해양방류 혼합구역에 대한 분석방법을 활용하여 마산만 해양방류 해역의 혼합구역에서 주변해수의 흐름과 밀도성층의 변화에 따른 혼합 희석에 의한 수중방류하수의 농도변화분포를 산정하였다. 방류해역에서 5월 중순부터 8월 중순까지 3개월 동안 연속 관측된 조류의 매 시간별 유향과 유속변화에 따른 혼합구역에서의 하수농도분포를 계산하고, 마산만 해수유동에 있어 가장 큰 요소인 조류의 변화를 고려하여 15일 간격으로 방류하수의 평균된 농도분포를 구하였다. 이 결과에 의하면 조류의 유속이 상대적으로 강했던 기간동안에는 혼합구역에서의 평균농도는 매우 낮았고, 유속이 약했던 기간에는 낮은 희석률로 인해 평균농도가 매우 높게 나타났다. 그리고 관측된 조류의 주 방향으로 인해 혼합구역이 방류해역의 서측 해안까지 확장됨을 나타내었으며, 이는 방류해역에서 조사된 퇴적물의 오염도 분포결과와도 잘 일치되었다.

• 한국지반공학회지:지반
• /
• 제12권1호
• /
• pp.47-62
• /
• 1996

The bedding zone which influence directly to the safety of dam is supporting the face slab under hydraulic load in concrete faced rockfill dam. In case that leakage is developed due to various ruptured joint or cracks of face slab and etc., the bedding zone should limit the leakage by low permeability and keep the internal stability. In this study for the proper coefficient of permeability various properties, such as gradation, dry density, performance of embankment work and etc. were analysed. The results from the large scale test of permeability and density are summerized as follows : 1. Coefficient of permeability is decreased clearly by increase of dry density. 2. The particles smaller than the No.4 strive( p,) greatly influences the permeability under dry density of 2.24t 1 m3. 3. In case of C.40 and p,40%, even if dry density decreased to 2.0t/m3, the permeability coefficient is assumed to u x1-scm/s and internal stability is abtained. 4. Generally in dam construction since dry density and uniformity coefficient of bedding zone were higher than 2.2t/m3 and 50 respectively p, of 30~40% is assumed to be suitable and permeability coefficient of below 1$\times$10-3cm l s is expectable.

• 생태와환경
• /
• 제43권4호
• /
• pp.513-517
• /
• 2010

The diel swarming of Moina macrocopa and the relationship between environmental factors were evaluated in a shallow reservoir. The littoral density of Moina macrocopa maintained low from night to noon, reached maximum density at the afternoon with compact swarms at the waters' edge, and dispersed after sunset. The recruitment of Moina macrocopa and changes of water temperature (r=0.709, p<0.001) and juvenile fish density (r=0.511, p=0.002) in the littoral zone showed a significant positive relationships. After the induction of diel horizontal migration toward littoral zone, therefore, direct juvenile fish predation pressure should be induced Moina macrocopa swarming.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.331-338
• /
• 2005

The grain structure, dislocation density and second phase particles in various regions including the stir zone(SZ), thermo-mechanically affected zone(TMAZ), and heat affected zone(HAZ) of a friction stir weld 6.35mm thick aluminum 7075-T651 alloy were investigated and compared with the base metal. The microstruectures of nugget zone were compared according to tool rotation speeds and tool transition speeds. The hardness profiles of nugget zone were increased, while decreasing rotation speed and increasing welding speed. The optimal microstructure was gained at the low rotation speed 800rpm and th high welding speed 124mm/min. The nugget microstructures of fracture surface, transgranular dimple and quasicleavage type were showed different fracture type with the HAZ, shear fracture type.

• 지질공학
• /
• 제13권1호
• /
• pp.129-137
• /
• 2003

폐갱도 지역에 형성된 지하공동과 그 주변에 발달된 파쇄대에서 공대공 탄성파 토모그래피 탐사의 신호변화를 해석하였다. 지하 공동과 파쇄대 주변에서는 초동시간의 지연과 에너지 감쇠 현상이 뚜렷하였고 파선의 우회현상으로 파선의 밀도가 저하되었다. 신선한 암반과 공동 주변을 통과한 트레이스에 대한 진폭스펙트럼 분석 결과 1000Hz정도의 주파수 범위까지는 진폭의 변화를 보이고 있지는 않으나, 2000Hz 정도에서는 공동 주변을 통과하는 것이 7dB 정도의 낮은 차이를 보이며, 3000Hz에서는 거의 20dB 정도까지 차이를 보인다. 본 연구를 통하여 탄성파 토모그래피 탐사를 이용한 신선한 암반과 지하 공동주위의 탄성파 자료 특성을 해석하였다.