• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.10
• /
• pp.885-892
• /
• 2013

The main advantage of ESPAR antenna is that ESPAR antenna requires only a single RF chain for reduction of transceiver's hardware complexity, as compared to conventional MIMO system. In conventional MIMO system, each data symbol is mapped to each antenna. But, each data symbol is mapped to each orthogonal basis pattern in ESPAR antenna system. In this paper, we design beamspace MIMO system using ESPAR antenna with single RF chain for MIMO system of low-complexity and low power consumption. And then, we analyze performance of beamspace MIMO according to each PSK modulation. Performance of beamspace MIMO system is similar to performance of conventional MIMO system. As a result of analyzing the performance of beamspace MIMO system using higher-order PSK modulation. we can confirm that performance characteristic of beamspace MIMO system with low complexity and low power consumption is similar to digital communication of signal domain.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.21-22
• /
• 2006

In this paper, to improve OFDM PAPR reduction performance of the conventional SLM method, we propose an effective SLM-PRSC hybrid scheme based on the repeated utilization of identical PRSC sequences in time domain. In the proposed scheme, after performing the SLM for the frequency domain OFDM symbol excluding the pre-determined PRSC positions, the final SLM-PRSC hybrid sequence with the lowest PAPR, which is generated by adding the time domain PRSC sequence to the results of the SLM is selected as the transmitted OFDM symbol. In particular, since the identical PRSC sequences generated a priori are repeatedly used for every OFDM symbol, excessive IFFT calculations are avoided. Moreover, the selected PRSC symbols in the frequency domain may be utilized as an overhead information for the SLM. Simulation results reveal that the proposed SLM-PRSC hybrid scheme can remarkably improve the PAPR reduction performance of the conventional SLM, while avoiding excessive increase of IFFT and PAPR calculations and the overhead for the SLM.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.2
• /
• pp.143-151
• /
• 2016

This paper presents new prediction methods to improve compression performance of the so-called near-lossless RGB-domain image coder, which is designed to effectively decrease the memory bandwidth of a system-on-chip (SoC) for image processing. First, variable block size (VBS)-based intra prediction is employed to eliminate spatial redundancy for the green (G) component of an input image on a pixel-line basis. Second, inter-color prediction (ICP) using spectral correlation is performed to predict the R and B components from the previously reconstructed G-component image. Experimental results show that the proposed algorithm improves coding efficiency by up to 30% compared with an existing algorithm for natural images, and improves coding efficiency with low computational cost by about 50% for computer graphics (CG) images.

• Bulletin of the Korean Mathematical Society
• /
• v.53 no.3
• /
• pp.853-874
• /
• 2016

Based on a particular overlapping domain decomposition technique, a parallel finite element discretization algorithm for the generalized Stokes equations is proposed and investigated. In this algorithm, each processor computes a local approximate solution in its own subdomain by solving a global problem on a mesh that is fine around its own subdomain and coarse elsewhere, and hence avoids communication with other processors in the process of computations. This algorithm has low communication complexity. It only requires the application of an existing sequential solver on the global meshes associated with each subdomain, and hence can reuse existing sequential software. Numerical results are given to demonstrate the effectiveness of the parallel algorithm.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.8
• /
• pp.1265-1274
• /
• 1990

A new classified VQ scheme for DCT coefficients(DCT-CVQ) is proposed for still image coding. DCT coefficient matrices are classified into six classes by ac coefficients that well represent edge characteristics and the distribution of ac energy in the DCT domain. To reduce the complexity of, VQ, ac transform coefficients are partitioned into several vectors, and an adaptive method is provided by making different codebook sizes for different classes. Simulation results show that this DCT-CVQ results in good subjective quality at low bit rates, and SNR is increased by about 1.5-4.0 dB in the range 0.2-0.5 bpp, when compared with other DCT-VQ coding schemes.

• Molecules and Cells
• /
• v.40 no.12
• /
• pp.889-896
• /
• 2017

Nuclear bodies are subnuclear, spheroidal, and membraneless compartments that concentrate specific proteins and/or RNAs. They serve as sites of biogenesis, storage, and sequestration of specific RNAs, proteins, or ribonucleoprotein complexes. Recent studies reveal that a subset of nuclear bodies in various eukaryotic organisms is constructed using architectural long noncoding RNAs (arcRNAs). Here, we describe the unifying mechanistic principles of the construction and function of these bodies, especially focusing on liquid-liquid phase separation induced by architectural molecules that form multiple weakly adhesive interactions. We also discuss three possible advantages of using arcRNAs rather than architectural proteins to build the bodies: position-specificity, rapidity, and economy in sequestering nucleic acid-binding proteins. Moreover, we introduce two recently devised methods to discover novel arcRNA-constructed bodies; one that focuses on the RNase-sensitivity of these bodies, and another that focuses on "semi-extractability" of arcRNAs.

• ETRI Journal
• /
• v.41 no.2
• /
• pp.184-196
• /
• 2019

Wavelet packet modulation (WPM) is a multicarrier modulation (MCM) technique that has emerged as a potential alternative to the widely used orthogonal frequency-division multiplexing (OFDM) method. Because WPM has overlapped symbols, equalization cannot rely on the use of the cyclic prefix (CP), which is used in OFDM. This study applies linear minimum mean-square error (MMSE) equalization in the time domain instead of in the frequency domain to achieve low computational complexity. With a modest equalizer filter length, the imperfection of MMSE equalization results in subcarrier attenuation and noise amplification, which are considered in the development of a bit-loading algorithm. Analytical expressions for the bit error rate (BER) performance are derived and validated using simulation results. A performance evaluation is carried out in different test scenarios as per Recommendation ITU-R M.1225. Numerical results show that WPM with equalization-aware bit loading outperforms OFDM with bit loading. Because previous comparisons between WPM and OFDM did not include bit loading, the results obtained provide additional evidence of the benefits of WPM over OFDM.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.8
• /
• pp.25-32
• /
• 2012

In this paper, we propose a method for improving the performance of low complexity LS channel estimation for OFDM in fast time varying channels. The CE-BEM channel model used for the low complexity LS channel estimation has a problem on its own and deteriorates channel estimation performance. In this paper, we first use time domain windowing in order to remove the effect of ICI caused by data symbols. Then samples are taken from the results of the LS channel estimation and the effects of the windowing are removed from them. For resolving the defect of CE-BEM, the channel responses are recovered by interpolating the resultant samples with DPSS employed as basis functions the characteristics of which is well matched to the time variation of the channel. Computer simulations show that the proposed channel estimation method gives rise to performance improvement over conventional methods especially when channel variation is very fast and confirm that not only which type of functions is selected for the basis but how many functions are used for the basis is another key factor to performance improvement.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.1
• /
• pp.51-60
• /
• 2009

This paper presents a new method of designing room equalization filters using a warped common acoustical pole and zero (WCAPZ) modeling. The proposed method is capable of significantly reducing the order of the equalization filters without sacrificing the filter performance, especially, at low frequencies. Thus, the associated input-output delay is much smaller than the conventional block transform method while its computational complexity is comparable to it. The computational complexity also is still comparable to the conventional room equalization method, since the filter is implemented in the linear frequency domain after the pole-zero dewarping. Simulation results confirm that the use of the proposed algorithm significantly improves the room equalization over a range of low frequencies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11C
• /
• pp.641-648
• /
• 2011

Frequency domain equalization is the most promising technology that has relatively low complexity in multipath channel. A frame of single carrier system with frequency domain equalization (SC-FDE) has cyclic prefix to mitigate effect of delay spread. After synchronization and equalization procedure on the SC-FDE system, common phase offset (CPO) that can introduce performance degradation caused by phase mismatch between transmitter and receiver oscillators is remained. In this paper, common phase offset tracking in frequency domain is proposed. To track CPO, constant amplitude zero autocorrelation code sequence as training sequence is adopted. By using numerical results, performance of mean square error is evaluated. The results show that MSE of CPO has similar performance compare to the time-domain estimation and there is no need of domain conversion.