• Journal of Wetlands Research
• /
• v.24 no.2
• /
• pp.115-122
• /
• 2022

As the impermeable area of soil increases due to urbanization, the water circulation system of the city is deteriorating. The existing guidelines for low impact development (LID) facilities installed to solve these water problems or in previous studies, engineering aspects are more prominent than landscaping aspects. This study attempted to present an engineering and landscaping model for reducing pollutants by identifying the effects of vegetation on rainfall outflows and pollutant reduction in bioretention and the economic aspects of planting. Based on the results of artificial rainfall monitoring at Jeonju Seogok Park and the literature on vegetation rainfall runoff and pollutant reduction performance, the best vegetation for reducing pollution compared to cost was Lythrum salicaria L and Salix gracilistyla Miq. was the best vegetation for carbon storage. If you insist to design plants with only these two plantation, there is no choice but to take risks such as biodiversity. Herbaceous plants such as Lythrum salicaria L can be replaced by death of the plants or pests if considered planting various plants. The initial planting cost could expensive, but it is also necessary to mix and plant Salix gracilistyla Miq, which are woody plants that are advantageous in terms of maintenance, according to the surrounding environment and conditions. Based on the conclusions drawn in this study, it can be a reference material when considering the reduction of pollution by species and carbon storage of vegetation in LID facilities.

• Journal of Preventive Medicine and Public Health
• /
• v.16 no.1
• /
• pp.163-192
• /
• 1983

In order to facilitate the Korean government's efforts in integrating family planning and maternal & child health at the primary health care level (or township level), the Soon Chun Hyang College of Medicine, with the financial and technical assistance of WHO, has under-taken a service research project. The project has employed a quasi-experimental study design introducing interventions tat provide crucial factors lacking in the ongoing government programs such as midwives and qualified referral physicians. The study is being conducted in three locations, one control area and two study areas. Before introducing trained Nurse/Midewives into the study areas, a baseline prevalence survey was undertaken from 15 July 1981 to 10 August 1981 in selelcted townships of Seosan County. In this sample survey of bath the study and control areas, 2,484 eligible women (97% reponse rate) were interviewed to obtain benchmark data on basic evaluation indicators related to family planning and maternal and child health. The salients results were summarized as follows.: 1. CONTACT RATES WITH HEALTH WORKERS; During the year preceding the survey, 12% of women were visited by government health workers. The primary reason for such visits by health workers was family planning (45% of the visits). About 34% of the women visited the health centers during the year. The primary reason for visiting health centers was immunizations for their children (45% of the visits). 3. FAMILY PLANNING USE RATE; The baseline data showed little difference between women in the study area and the control area on contraceptive use. Approximately 59% were currently using some methods. However, among those current users, almost half were practicing less effective methods of birth control such as rhythm or withdrawal. Among other methods, the tubectomy was the most popular (16%), while use of the IUD, oral pill and condom together reached only 14%. 3. PRENATAL CARE RATE; About 75% of the women reported no prenatal care for their last births (the youngest child of each women), Additionally, among women received prenatal care, over half had only one visit. 4. ATTENDANCE AT DELIVERY; Most of the women surveyed (over 80%) were attended by a non-medical person during their last delivery. These figures are somewhat comparable to the national figure of 84% for remote areas. 5. POSTNATAL CARE; The proportion of women reporting postnatal care was only 4.5%, and postnatal care was not received by the majority of women surveyed. 6. CHILD HEALTH CARE: In contrast to the low rate of maternity care for women themselves, most women reported obtaining immunization care for their children. About 75% of the women obtained Polio and/or DPT, 58% BCG, and 44% Measles vaccine for their children. However, in terms of illness care, while 35% of the women stated that their youngest child had been sick during the month preceding the survey, only 28% of these women took their child to the clinic for treatment. 7. COMPLICATIONS OF PREGNANCY AND DELIVERY AND ABNORMALITIES IN THE NEWBORN; Among all last deliveries, 18% of the women had pregnancy complications and 9% of the women had complications during delivery About 5% of the women reported abnormality in their most recent newborn. 8. REPRODUCTION EFFICIENCY; PERINATAL MORTALITY AND INFANT MORTALITY Based on data from the pregnancy history in this survey, reproduction efficiency was estimated. Out of the 11,154 pregnancies reported by all women surveyed, foetal loss was 21% (almost 16% were induced abortions) and infant deaths before reaching one year old were 3.1%. The reproduction efficiency was, therefore, reduced to 76%. In terms of perinatal and infant mortality rates, the former was 40.2 per 1,000 total births and the latter was 39.3 per 1,000 live births. Both rates described J shaped relationships with age of mothers and parity, and they were also correlated with birth interval and mother's education. In summary, this baseline survey data indicated a need for (1) improving contraceptive practices with more effective methods to prevent unwanted pregnancies and (2) providing better services for maternal and child care to protect wanted pregancies. In the Korean rural setting. the author believes that the latter is more important as the value of each child has increased as a result of the family planning campaign for the past two decades. This calls for more effective integration of Family Planning and MCH programmes to meet the needs of the family in each stage of the child bearing and rearing period with deploying more qualified personnel than the current government program personnel.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.5
• /
• pp.31-41
• /
• 2009

Under the Korea Building Act, anyone planning to build a building or buildings on a site over $200m^2$ must plant plants over a specific area. In large scale development this rule is adhered to well, but such is not the case in small scale development. Therefore, special attention must be given to small scale development. Thus, the purpose of this research is to analyze the current situation and practice of planting at small scale development sites in Seoul, and then suggest policies for improving them. In this study using the data covering Seongbuk-Gu and Gangnam-Gu, which was surveyed in 2002, the current situation and practice of planting at small scale development sites was analyzed. After a questionnaire survey was conducted with government officers and building owners, the same analysis was made. Then the policies for improvement were extracted. The results are as follows: 1. In superordinate planning stage, because the minimum standards are too low, those must be strengthened. Any district plan does not control planting in private building lots. This requests active application of planting in private building lots as a design control measure in district planning. 2. In the building design stage, there are no guidelines. The obligation of building set-back between adjacent buildings by the Korean Building Act produces mass shaded and inferior planting beds. The act also is blocking landscape architects' participation in small scale development. And wall installations deteriorate the streetscape and growth of plants with shading. Therefore guidelines must be made. 3. In each stage of the building permit, the permit for building completion, and maintenance the Korean Building Act is blocking landscape architects' participation in small scale development, so the planting plan is completely handled by nonprofessional persons. Therefore, the act should be amended in order to make way for landscape architects' participation in each stage of the small scale development process.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.8
• /
• pp.781-788
• /
• 2013

Predicting the engine component temperature is a basic step to conduct structural safety evaluation in medium-speed diesel engine design. Recent trends such as increasing power density and performance necessitate more effective thermal management of the engine for achieving the desired durability and reliability. In addition, the local temperatures of several engine components must be maintained in the proper range to avoid problems such as low- or high-temperature corrosion. Therefore, it is very important to predict the temperature distribution of each engine part accurately in the design stage. In this study, the temperature of an engine component is calculated by using steady-state conjugate heat transfer analysis. A proper approach to determine the thermal load distribution on the thermal boundary area is suggested by using 1D engine system analysis, 3D transient CFD results, and previous experimental data from another developed engine model. A Hyundai HiMSEN engine having 250-mm bore size was chosen to validate the analysis procedure. The predicted results showed a reasonable agreement with experimental results.

• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.399-409
• /
• 2015

Recently, the use of composite construction method using precast (PC) and cast-in-place (CIP) concrete is increased in modular construction. For PC members, pre-tensioning is used to improve efficiency of the structural performance. However, current design codes do not clearly define shear strength of prestressed PC-CIP composite members. In this study, 22 specimens were tested to evaluate shear strength of prestressed composite members with vertical shear reinforcement. The test variables were the area ratio of high-strength (60 MPa) to low-strength concrete (24 MPa), prestressing force of strands, shear span-to-depth ratio(a/d), and vertical shear reinforcement ratio. The test results showed the prestressing force did not completely restrain diagonal cracking of non-prestressed concrete in the web. Thus, the effect of prestress force was not insignificant in the effect for monolithic beams. The vertical shear strength and horizontal shear strength of the composite beams were compared with the strength predictions of KCI design method.

• Tunnel and Underground Space
• /
• v.13 no.4
• /
• pp.279-286
• /
• 2003

Many trials to set up the correlation between the rock mass classification and the earth resistivity have been carried out to design tunnel support type based on the interpreted electrical resistivity acquired by surface electrical survey. But it is hard to find reports on the comparison of the real rock support type determined during the excavation with the electrical resistivity by the inversion of the survey data acquired before the tunneling. In this study, the rock mass classification based on the face mapping data and the resistivity inversion data are investigated to see if it is possible to design reliably the rock support type based on the surface electrical survey. To get the quantitative correlation, rock engineering indices such as RCR(rock condition rating), N(Rock mass number), Q-system and RMR(rock mass rating) are calculated. Since resistivity data has low resolution, Kriging method as a post processing technique which minimizes the estimated variance is used to improve resolution. The result of correlation analysis shows that the 2D electrical resistivity survey is appropriate to see the general trend of the geology in the sense of rock type, though there might be some local area where these two factors do not coincide. But the correlation between the result of 3D survey and the rock mass classification turns out to be very high, and then 3D electrical resistivity survey can make it possible to set up more reliable rock support type.

• Science of Emotion and Sensibility
• /
• v.21 no.2
• /
• pp.3-14
• /
• 2018

For satisfying consumer needs, commercial facilities require a variety of sale-related space expressions and eye-catching product arrangements; space composition can also be a direct marketing strategy. The human eye is the sensory organ that acquires the largest amount of information, and an analysis of visual information helps in understanding visual relations between . However, the existing studies are mostly focused on analysis of still frames in experimental images, and there is a lack of studies analyzing gaze information based on mobile images of commercial spaces. Therefore, this study analyzed emotional responses through gaze information of space users in reality using a video of a movement route through a commercial facility. The analysis targeted straight sections of the moving route; based on the data acquired, sectional characteristics of five gaze intensity ranges were examined. As a result, section A, the starting point of the route, had a low gaze intensity, while section B had the highest gaze intensity. This indicates that, starting in section B, the subjects explored the space in a stable way and needed time to adapt to the experimental video. In relation to space characteristics of the gaze-concentrated area, display formats of the right stores in 4 of 6 sections received greater attention. The gaze of consumers was mostly focused on props, and big gaze information was revealed in showcase display formats of the stores. In conclusion, this analysis method can provide highly useful direct design data about merchandise display and merchandise component arrangement based on consumer visual preference.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.521-527
• /
• 2020

In offshore structures, the mean viscous drift force due to drag is considered to be a design part that has not been considered until recently. In particular, it is most important to calculate the drift force acting on a vertical cylinder considering both waves and currents in the low frequency region. This paper presents a process for deriving analytical solutions for the drift forces acting on a fixed vertical cylinder considering waves and currents. The area of the cylinder was considered by dividing it into a splash zone above the free surface and a submerged zone below the free surface. The presence of waves is considered only in the Splash Zone, and in the case of waves and currents, the equations were obtained for both the splash and submerged zones. The results show that drift forces occur due to the significant viscous effects in both the splash zone and the submerged zone. Therefore, the analytical solutions derived in this study can be used to calculate the drift force using the given design variables and form a theoretical basis for judging whether the magnitude of the drift force in each case has a dominant influence within a specific physical range.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.306-315
• /
• 2010

The stress laminated timber, which could be manufactured by small dimension lumber on construction site, has high possibilities for bridges in remote area, such as recreation forest or forest road, because those bridges may be short span and low frequency in use. The stress laminated timber has merits of easiness for preservative treatment and transportation because it is manufactured with small dimension lumber. This study was carried out to analyze performances of stress laminated timber manufactured with preservative treated domestic pitch pine for developing structural design data for stress laminated timber bridges for vehicular traffic. Perpendicular to grain compressive performance by preservative treatment and bending performance by bored holes of pitch pine lumber was analyzed. Then, the effects of bending performance by pre-stress pressure, distance of bolts, number of laminations and planning were analyzed. Conclusively, planning of lumber was not necessary for manufacturing stress laminated timber, and 80% of bending stiffness criteria was maintained as pre-stress pressure was higher than 3.0 kg/$cm^2$. However, further researches are needed to define the effects of bolt distances and number of laminations. The results of this research would be basic data for design stress laminated timber bridges for vehicular traffic in Korea.

• Strategy21
• /
• s.41
• /
• pp.261-293
• /
• 2017

Nuclear power is a way of attaining an enormous amount of energy with relatively small amount of resources and after it has been introduced to the submarine since 1954, there are approximately 150 of nuclear powered submarine currently on a mission around the world. This is due to the maneuverability, mountability and covertness of nuclear submarines. However, there are other tasks, not only the high level of nuclear technology that are needed to be dealt with in order to construct nuclear powered submarine. The biggest task of all is to secure the enriched uranium. Accordingly, this research is about the way of enriching and securing the nuclear fuel that are used in the nuclear submarine with the characteristics, merits and demerits of the nuclear submarine. Due to the fact that the pressurized water reactor in South Korea is the reactor that was originally built for the development of nuclear powered submarine, many parts is designed to be suitable for the submarine propulsion. However, in order to apply this to submarine it is needed to consider additional requests such as the position of reactor, accident-coping system, radioactive covering, reactor output adjustment and ship's pitch and roll in order to apply this to submarine. Nuclear submarines have much higher speed based on the powerful propulsion in comparison with diesel-electric submarine and also have bigger loading area. Besides, there is no need to snorkel and they also have advantages in covertness with the multi-noise proof system. The nuclear technology in South Korea has seen the dramatic development since 1962 and in 1998 reached to the level that we have succeeded in the localization of nuclear plant and exported the world-class one-piece small-sized reactor (SMART) to UAE. To operate these reactors, we import the whole quantity of low-enriched uranium and having our own uranium enrich facility is not probable because of the budget and international regulations. With the ROK/US nuclear agreement revised on 2015 November, the enrichment of uranium that are available without special permission has changed up to 20%. According to the assumption that we use the 20% enrichment of Uranium on U.S. virginia class submarine, it is necessary to change the fuel after 11 years and it will cause additional cost of 1 billion dollars. But the replace period by the uranium's enrichment rate is not fixed so that it is possible to change according to the design of reactor. Therefore, I would like to make a suggestion on two types of design concepts of nuclear submarine that can be operated for 30 years without nuclear fuel change by using the 20% enriched uranium from ONNp.First of all, it is possible by increasing the size of reactor by 3 times and it results in the 1,000t increase of the weight. And secondly, it is by designing the one piece reactor to insert devices such as steam turbine, condenser into the inside of nuclear core like the Rubis class submarines of France.