• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.1
• /
• pp.33-39
• /
• 2007

Finite field multipliers are the basic building blocks in many applications such as error-control coding, cryptography and digital signal processing. Hence, the design of efficient dedicated finite field multiplier architectures can lead to dramatic improvement on the overall system performance. In this paper, a new bit serial structure for a multiplier with low latency in Galois field is presented. To speed up multiplication processing, we divide the product polynomial into several parts and then process them in parallel. The proposed multiplier operates standard basis of $GF(2^m)$ and is faster than bit serial ones but with lower area complexity than bit parallel ones. The most significant feature of the proposed architecture is that a trade-off between hardware complexity and delay time can be achieved.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.4
• /
• pp.21-28
• /
• 2009

In the recent years, power attacks were widely investigated, and so various countermeasures have been proposed, In the case of block ciphers, masking methods that blind the intermediate values in the algorithm computations(encryption, decryption, and key-schedule) are well-known among these countermeasures. But the cost of non-linear part is extremely high in the masking method of block cipher, and so the inversion of S-box is the most significant part in the case of AES. This fact make various countermeasures be proposed for reducing the cost of masking inversion and Zakeri's method using normal bases over the composite field is known to be most efficient algorithm among these masking method. We rearrange the masking inversion operation over the composite field and so can find duplicated multiplications. Because of these duplicated multiplications, our method can reduce about 10.5% gates in comparison with Zakeri's method.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.25 no.1
• /
• pp.30-40
• /
• 2022

Purpose: Pediatric acute appendicitis has a stable incidence rate in Western countries with an annual change of -0.36%. However, a sharp increase was observed in the Asian region. The Indonesian Health Department reveals appendicitis as the fourth most infectious disease, with more than 64,000 patients annually. Hence, there is an urgent need to identify and evaluate the risk factors and diagnostic modalities for accurate diagnosis and early treatment. This study also clarifies the usage of pediatric appendicitis score (PAS) for children <5 years of age. Methods: The current study employed a cross-sectional design with purposive sampling through demographic and PAS questionnaires with ultrasound sonography (USG) results. The analysis was performed using the chi-square and Mann-Whitney tests and logistic regression. Results: This study included 21 qualified patients with an average age of 6.76±4.679 years, weighing 21.72±10.437 kg, and who had been hospitalized for 4.24±1.513 days in Siloam Teaching Hospital. Compared to the surgical gold standard, PAS and USG have moderate sensitivity and specificity. Bodyweight and stay duration were significant for appendicitis (p<0.05); however, all were confounders in the multivariate regression analysis. Incidentally, a risk prediction model was generated with an area under the curve of 72.73%, sensitivity of 100.0%, specificity of 54.5%, and a cut-off value of 151. Conclusion: PAS outperforms USG in the sensitivity of diagnosing appendicitis, whereas USG outperforms PAS in terms of specificity. This study demonstrates the use of PAS in children under 5 years old. Meanwhile, no risk factors were significant in multivariate pediatric acute appendicitis risk factors.

• Journal of Convergence for Information Technology
• /
• v.12 no.4
• /
• pp.1-8
• /
• 2022

With the development of communication infrastructure, the number of network equipment owned by one person is gradually increasing. General-purpose devices such as smartphones can implement theft/loss prevention function by implementing S/W. However, other small devices lack practicality such as long-distance communication problems due to standard communication technology specifications or H/W limitations, and lack of functions(authentication and security). This study combines the Lora communication protocol in the LPWA standard environment and the blockchain technology. Anti-theft and security functions were added to the protocol, and the PBFT consensus algorithm was applied to build a blockchain network. As a result of the test, the effectiveness of safety(authentication and trust network) and performance(blockchain processing performance) were confirmed. This study aims to contribute to the future development of portable or small device anti-theft products as a 4th industrial convergence research.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2444-2452
• /
• 2022

The field-programmable gate array (FPGA) is gaining popularity in industrial automation such as nuclear power plant instrumentation and control (I&C) systems due to the benefits of having non-existence of operating system, minimum software errors, and minimum common reason failures. Separate functions can be processed individually and in parallel on the same integrated circuit using FPGAs in comparison to the conventional microprocessor-based systems used in any plant operations. The use of FPGAs offers the potential to minimize complexity and the accompanying difficulty of securing regulatory approval, as well as provide superior protection against obsolescence. Wireless sensor networks (WSNs) are a new technology for acquiring and processing plant data wirelessly in which sensor nodes are configured for real-time signal processing, data acquisition, and monitoring. ZigBee (IEEE 802.15.4) is an open worldwide standard for minimum power, low-cost machine-to-machine (M2M), and internet of things (IoT) enabled wireless network communication. It is always a challenge to follow the specific topology when different Zigbee nodes are placed in a large network such as a plant. The research article focuses on the hardware chip design of different topological structures supported by ZigBee that can be used for monitoring and controlling the different operations of the plant and evaluates the performance in Vitex-5 FPGA hardware. The research work presents a strategy for configuring FPGA with ZigBee sensor nodes when communicating in a large area such as an industrial plant for real-time monitoring.

• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.735-740
• /
• 2021

In this paper, we propose a new ESD protection device with high holding voltage with low current gain of parasitic NPN BJT by improving the structure of the existing LTDDSCR. The electrical characteristics of the proposed protection device were analyzed by HBM simulation using Synopsys' TCAD simulation, and the operation of the added BJT was confirmed by current flow, impact ionization and recombination simulation. In addition, the holding voltage characteristics were optimized with the design variables D1 and D2. As a result of the simulation, it was verified that the new ESD protection device has a higher holding voltage compared to the existing LTDDSCR and has a symmetrical bidirectional characteristic. Therefore, the proposed ESD protection device has high area efficiency when applied to an IC and is expected to improve the reliability of the IC.

• Structural Engineering and Mechanics
• /
• v.78 no.3
• /
• pp.351-368
• /
• 2021

This paper, by applying a reliability-based framework, develops seismic vulnerability macrozonation maps for Tehran, the capital and one of the most earthquake-vulnerable city of Iran. Seismic performance assessment of 3-, 4- and 5-story steel moment resisting frames (SMRFs), designed according to ASCE/SEI 41-17 and Iranian Code of Practice for Seismic Resistant Design of Buildings (2800 Standard), is investigated in terms of overall maximum inter-story drift ratio (MIDR) and unit repair cost ratio which is hereafter known as "damage ratio". To this end, Tehran city is first meshed into a network of 66 points to numerically locate low- to mid-rise SMRFs. Active faults around Tehran are next modeled explicitly. Two different combination of faults, based on available seismological data, are then developed to explore the impact of choosing a proper seismic scenario. In addition, soil effect is exclusively addressed. After building analytical models, reliability methods in combination with structure-specific probabilistic models are applied to predict demand and damage ratio of structures in a cost-effective paradigm. Due to capability of proposed methodology incorporating both aleatory and epistemic uncertainties explicitly, this framework which is centered on the regional demand and damage ratio estimation via structure-specific characteristics can efficiently pave the way for decision makers to find the most vulnerable area in a regional scale. This technical basis can also be adapted to any other structures which the demand and/or damage ratio prediction models are developed.

• Journal of Distribution Science
• /
• v.21 no.6
• /
• pp.107-117
• /
• 2023

Purpose: To know the existence of tax services, it is seen as a redistribution of income to ensure the implementation of national development and social welfare carried out by the state to the community and determine the effect of the quality of tax services, tax audits and tax collection against either simultaneously or partially against the tax ratio in the area of the Primary Tax Service Office of West Makassar. Research Design Data and Methodology: The tax revenue rate is too low based on the Revenue Statistics in Asian and Pacific report, released by the OECD at the end of July 2017. Tax revenue growth is also difficult to increase because of typical inelastic tax revenues. Consequently, tax growth cannot exceed GDP growth. The government boosted the tax ratio by minimizing tax payment irregularities and optimizing tax data utilization as well as distribution income for national social welfare. Transforming all sectors in the real economy so that it is affordable to tax, diversification of taxation is directed towards new sources of economic growth. The data analysis method used is multiple linear regression. Results: The results showed that the quality of tax services and tax audits were dominant in determining tax ratios, whereas Tax collection offers a significant but lower value.Conclusion: The existence of tax services, it is seen as a redistribution of income to ensure the implementation of national development and social welfare carried out by the state to the community.Quality and service in taxation services to create and maintain trust and cooperation relationships between tax officials and taxpayers.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.5
• /
• pp.69-81
• /
• 2006

The micropile, which is a kind of the in-situ manufactured pile with small diameter of $150\sim300mm$, is constructed by installing a steel bar or pipe and injecting grout into a borehole. The application fields of micropile are being gradually expanded in a limited space of down-town area, because the micropile has various advantages with low vibration and noise in method and compact size in machine, etc. Mostly, the micropile has been applied to secure the safety of structures, depending on the increment of bearing capacity and the restraint of displacement. The micropile is expected to be used in various fields due to its effectiveness and potentiality in the future. The model test, focused on the interaction between micropile and soil in this study, was carried out. The micropile is installed in a soil adjacent to footing (concept of 'soil reinforcement'). With the test results and soil deformation analysis, the reinforcement effect (relating to bearing capacity and settlement) was analysed in a qualitative and quantitative manner, respectively. Consequently, it is expected that we nay demonstrate the improvement of an efficiency and application in the design and construction of micropile.

• The Journal of Korean Medicine
• /
• v.43 no.4
• /
• pp.131-144
• /
• 2022

Objectives: This study aimed to review clinical studies on thread embedding acupuncture (TEA) for the treatment of patients with post-stroke spasticity (PSS) Methods: Clinical studies related to TEA treatment for PSS were searched for in several electronic databases, including PubMed, Cochrane Library, MEDLINE, OASIS, and CNKI. After the selection/exclusion process, information on study design, disease, experimental/control group, intervention, outcome measurement, between-group differences, and adverse events was extracted. Results: A total of 13 randomized controlled trials were included in this review. The usual frequency of TEA treatment was once every 1-2 weeks, and the treatment most commonly included 4 sessions. In the dorsal area, EX-B2 and the acupoints in governing vessel meridian were commonly used. Acupoints in the meridian of the large intestine were most frequently used in the treatment of upper limb spasticity. Except for HT1, PC6, and PC8, all TEA points for treating PSS of the upper limb were on the Yang meridians. For the lower limb spasticity, the most frequently used acupoints were ST36, GB34, GB30, BL60, and BL57 on Yang meridians, and LR3, SP6, SP9, and SP10 on Yin meridians. TEA treatment showed better effects than conventional treatment for PSS in terms of spasticity, motor dysfunction, and activities of daily livings. Nevertheless, the absence of the follow-up observation, lack of sham TEA treatment, and low quality of the included studies necessitated caution in interpreting the results. Conclusions: The results of this review are expected to provide basic data on the modalities of TEA treatment for PSS and provide insights to facilitate well-designed studies in the future.