• 대한환경공학회지
• /
• 제29권2호
• /
• pp.229-234
• /
• 2007

본 연구에서는 고형물 체류시간, 수리학적 체류시간, 생흡착시간 및 온도 변화가 이단슬러지 유형의 연속회분식반응기 공정 운영에 어떻게 영향을 주는지를 조사함으로서 본 공정을 최적화 하고자 하였다. T-N 제거에 있어서 고형물 체류시간이 증가할수록 T-N 제거효율이 증가하는 경향을 관찰할 수 있었는데 이는 SRT가 증가할수록 SCOD 생흡착효율의 증가와 관련이 있을 것으로 판단된다. HRT 영향에 있어서 HRT 8시간, 10시간 및 15시간에서 암모니아성 제거효율 및 T-N 제거효율은 각각 HRT 영향에 관계없이 거의 같았다. 생흡착시간을 20분 이상 증가시켜도 T-N 제거효율 향상에는 도움이 되지 않는 것으로 관찰되었다. 서로 다른 온도 조건에서 공정 제거 효율 비교에 관해 조사한 결과 온도의 감소가 공정 성능에 영향을 주지는 않았으나 인 제거 효율에 있어서 높은 온도에서보다 낮은 온도에서 인 제거효율이 다소 높게 관찰되었다. 결과적으로 본 연구에서 개발된 공정은 낮은 온도 조건 및 높은 유입 부하를 가진 폐수처리에 적합한 것으로 나타났다.

• 한국식생활문화학회지
• /
• 제35권5호
• /
• pp.450-458
• /
• 2020

This study examined the optimal temperature and time conditions to maintain high quality Dongchimi during the fermentation and storage period. Dongchimi was fermented at low (5℃), medium (10 and 15℃), and high (20℃) temperatures until the acidity reached 0.2, 0.3, and 0.4%. respectively. From the consumer's preference test enrolling five consumers, Dongchimi fermented at 15℃ until an acidity of 0.3% (for approximately six days) was evaluated to be the optimal status because of its high score of overall acceptance, taste, and odor of consumers. To determine the optimal storage temperature of fermentation, Dongchimi was stored at three different temperatures (-1, 2, 5℃) for four weeks after fermenting at 15℃ for six days. During the storage period, most of the physicochemical properties (pH, acidity, reducing sugar content, and organic acid) and microbiological properties changed significantly in the 2 and 5℃ groups, resulting in a significant change in descriptive sensory analysis of Dongchimi. These results indicate that fermentation at 15℃ and storage at -1℃ for Dongchimi enables it to maintain the best quality for a long time.

• 한국광물학회지
• /
• 제10권1호
• /
• pp.18-32
• /
• 1997

Analysis of geological data, relating to occurrence and formation of diamonds as well as host rocks, inclined author to have different outlook on the diamond genesis and to establish a proposition on their formation at pneumatolytic-hydrothermal conditions near superficial Earth zones. Based on that theoretical foundations and experimental works, the first low-pressure and low-temperature hydrothermal diamond synthesis from water solution in pressure autoclave was executed. As a result, the natural diamond seed crystal grew bigger ad coupling of the synthetic diamond single-crystalline grains were obtained. SEM documentation proofs that parallely paragenetic crystallization of quartz and diamond, and nucleation of new octahedral diamond crystals brush take place on the seed crystal surface. Forecast of none times growth of diamond industrial application at 2000 and seventeen times at 2010 with reference to 1995, needs technology of large and pure single-crystals diamond synthesis. Growth of the stable and destressed diamond single-crystals in the pseudo-metastable diamond plot, may be realized with processes going through the long time and with participation of free radicals catalysts admixtures only. Sol-gel colloidal processes are an example of environment which form stable crystals in thermodynamically unstable conditions through a long time. Paper critically discusses a whole way of studies on the diamond synthesis, from high-pressure and high-temperature processes through chemical vapour deposition up to hydrothermal experiments.

• 대한치과기공학회지
• /
• 제31권2호
• /
• pp.39-44
• /
• 2009

In the orthopedic field which firstly used zirconia as artificial joints, researchers had studied the reasons for collapsing zirconia used as restorative material by accumulated inner cracks in several years and they found out Low Temperature Degradation is one of the reasons. In the dentistry field, it has not been too long since they used zirconia as the cores of all-ceramic restoration; however, the study is needed as prophylactic measure against Low Temperature Degradation which can be caused by saliva wetting the mouth all the time and frictional forces such as bite pressure and masticatory pressure. Artificial aging by autoclaving is used because there are difficulties of testing in the patient's mouth. To study the changes in the material properties, the flexural strength of dental zirconia ceramic is measured before and after the test. The following are the result of the test. 1) The zirconia blocks in the autoclaves at $130^{\circ}C$ and $200^{\circ}C$ are phase-shifted tetragonal to monoclinic by Low Temperature Degradation. 2)The non-autoclaved specimens have the average fractural strength of 1346.4MPa, the specimens autoclaved at $130^{\circ}C$ have 1226.4Mpa and the specimens autoclaved at $200^{\circ}C$ have 1024.1MPa. The tests show that as the temperature increases, the flexural strength tend to decrease and the differences are noticeable(p<0.001). 3)Through the Duncan's post-hoc test, the differences in flexural strength of the 3 groups were listed in order of strength like normal temperature>at $130^{\circ}C$ autoclave low temperature degradation> at $200^{\circ}C$ autoclave low temperature degradation.

• 대한금속재료학회지
• /
• 제50권4호
• /
• pp.271-279
• /
• 2012

9-12% Cr steels have been used in thermal power plants which repeat start and stop operations. Major factors of fatigue life are temperature, frequency, stress ratio, holding time, microstructure, and environment. Normally, fatigue life decreases at high temperature, low frequency, high stress ratio, and long holding time conditions. A Mod.9Cr-1Mo steel, called G91, was developed at ORNL (Oak Ridge National Laboratory, USA) and was adopted as a high-temperature structural material in the ASME Code in 2004. However, its low-cycle fatigue and fatigue crack growth characteristics have been rarely studied. In this work, we have investigated the low-cycle fatigue crack growth behaviors of G91 steel under various test conditions in terms of temperature and stress ratio. As temperature and stress ratio increase, the crack growth rate becomes faster and striation distance also increases. On the other hand, the number of branch cracks decreases.

• 대기
• /
• 제29권5호
• /
• pp.599-607
• /
• 2019

The change and periodicity of Korean winter temperature in the period 1979-2018 are investigated. It is shown that the winter temperature is on a long-term rise, with two regime shifts of winter temperature during 40 years. In addition, the decrease in cold days is confirmed along with the rise in temperature. Analysis of the periodicity of daily temperature in winter is carried out by means of power spectral analysis. Of the spectral peaks that are statistically significant, the most frequent detection exists on the time scale between 7 and 8 days. It is found that the number of significant periods have decreased since 2014, particularly no longer existent around the period of 7 day. The longer periods than 7 days gradually increase during 40 years, while the shorter periods show the tendency of decrease but recently rebound. Spectral analysis calculated from high/low-pass filtered daily temperature data also shows similar results.

• KIEAE Journal
• /
• 제7권5호
• /
• pp.59-64
• /
• 2007

Using air conditioner has been increased in home or office buildings in summer. Also various problems related to air conditioning such as disease induction happened by using air conditioner excessively and operating long. Active operation control is needed for occupant's health when air conditioner operates long. We should think ahead to acquire thermal comfort of occupants which represents psychological and physiological reaction for this operation. Research has been progressed to observe activity of autonomic nervous system by trying to quantitate change of thermal comfort. In this study, questions of the subject and change of body's autonomic nervous system were chosen to evaluate thermal comfort during operation of air conditioner for a long time. Electrocardiogram and questions of the subject which is the progress of changing TSV and CSV by occupants indoor were measured when room air conditioner is operated for a long time, and an air-conditioned adaptability of human body was evaluated by acquiring the change rate of autonomic nervous system through analyzing HRV. As a result of the evaluation, change rate of body's autonomic nervous system corresponded to votes of the subject's question generally, but was distinguished from analysis result of warm-cold sensation in a low temperature area.

• Journal of the korean society of oceanography
• /
• 제39권4호
• /
• pp.207-211
• /
• 2004

We used long time series of hydrographic and biological variables to examine the ecosystem consequences of a rare, anomalous event in the south sea of Korea. The highest zooplankton biomass in 36 years of sampling occurred in April 1997. Zooplankton biomass exceeded 2 times than the long-term mean at 35% of the stations. Copepod abundance was low in April and June and also failed to show a seasonal peak in 1997. Mackerel (Scomber japonicus) catches were very low in spring 1997 and 1999, in spite of a positive correlation between zooplankton biomass and mackerel catches at lags of 0, 12 and 24 months. It was discussed that a high zooplankton biomass with low copepod abundance in April 1997 resulted from unusual high temperature and salps abundance. Water temperatures were ca. $2^{\circ}C$ higher than the long-term mean at the surface. Salps and doliolids (thaliaceans), especially the warm-water species Doliolum nationalis, dominated the zooplankton. An unusual incursion of the Tsushima Warm Current may have transported the thaliaceans into the area and/or produced favorable conditions for a bloom. This study suggested that taxonomic composition of zooplankton was important to decide mackerel catches.

• 대한원격탐사학회지
• /
• 제38권3호
• /
• pp.265-282
• /
• 2022

해수면 온도(Sea surface temperature, SST)는 지구시스템에서 해양의 순환과 생태계에 큰 영향을 주는 요소이다. 지구온난화로 한반도 근해 해수면 온도에 변화가 생기면서 이상 수온(고수온, 저수온) 현상이 발생하여 해양생태계와 수산업 피해를 지속적으로 발생시키고 있다. 따라서 본 연구는 한반도 근해 해수면 온도를 예측하여 이상 수온 현상 예측으로 피해를 예방하는 방법론을 제안한다. 연구 지역은 한반도 근해로 설정하여 동시간대 해수면 온도 데이터를 사용하기 위해 Europe Centre for Medium-Range Weather Forecasts (ECMWF)의 ERA5 자료를 사용하였다. 연구방법으로는 해수면 온도 데이터의 시계열 특징을 고려하여 딥러닝 모델 중 시계열 데이터 예측에 특화된 Long Short-Term Memory (LSTM) 알고리즘을 이용하였다. 예측 모델은 1~7일 이후 한반도 근해 해수면 온도를 예측하고 고수온(High water temperature, HWT) 혹은 저수온(Low water temperature, LWT) 현상을 예측한다. 해수면 온도 예측 정확도 평가를 위해 결정계수(Coefficient of determination, R²), 평균제곱근 편차(Root Mean Squared Error, RMSE), 평균 절대 백분율 오차(Mean Absolute Percentage Error, MAPE) 지표를 사용하였다. 예측 모델의 여름철(JAS) 1일 예측 결과는 R²=0.996, RMSE=0.119℃, MAPE=0.352% 이고, 겨울철(JFM) 1일 예측 결과는 R²=0.999, RMSE=0.063℃, MAPE=0.646% 이었다. 예측한 해수면 온도를 이용하여 이상 수온 예측 정확도 평가를 F1 Score로 수행하였다(여름철(2021/08/05) 고수온 예측 결과 F1 Score=0.98, 겨울철(2021/02/19) 저수온 예측 결과 F1 Score=1.0). 예측 기간이 증가하면서 예측 모델이 해수면 온도를 과소추정하는 경향을 보여주었고, 이로 인해 이상 수온 예측 정확도 또한 낮아졌다. 따라서, 향후 예측 모델의 과소추정 원인을 분석하고 예측 정확도 향상을 위한 연구가 필요할 것으로 판단된다.

• 폴리머
• /
• 제32권5호
• /
• pp.440-445
• /
• 2008

정수압 상태의 선형저밀도 폴리에틸렌 튜빙의 파손 메커니즘과 파손 모폴로지를 연구하였다. 비디오현미경과 주사전자현미경을 이용한 관찰 결과, 선형저밀도 폴리에틸렌 튜빙의 파손모드는 내면에서 외면으로 진전되는 크랙을 수반하는 취성파괴임을 확인하였다. 또한 산화유발시간과 적외선분광분석을 통하여, 파손된 선형저밀도 플리에틸렌 튜빙의 단면상에 열화에 의한 발열 피크와 카르보닐 피크의 증가를 관찰하였다. 열 가속에 의한 음력과 수명특성 사이의 관계를 고려한 선형저밀도 폴리에틸렌 튜빙의 가속수명시험법 및 시험장치를 개발하였다. 선형저밀도 폴리에틸렌 튜빙의 장기 정수압 상태의 수명을 예측하기 위해 아레니우스 모델과 와이블 분포를 적용한 통계학적 기법을 도입하였다. 그 결과, 사용온도 $25^{\circ}C$에서의 선형저밀도 폴리에틸렌 튜빙의 장기수명을 평가/분석하였다.