• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.439-442
• /
• 2004

The effects of sintering additives on the low-temperature sintering and microwave dielectric properties of $Mg_4Nb_2O_9$ dielectric ceramics were studied. When $3{\sim}20wt%$ of $0.242Bi_2O_3-0.758V_2O_5$ was added, the sintering temperature decreased from $1100{\sim}1300^{\circ}C$ to $950^{\circ}C$ and high density was obtained. When $Mg_4Nb_2O_9$ was sintered at $950^{\circ}C$ with 10wt% of sintering additive, the microwave dielectric properties of $Q{\times}f_0\;=\;80.035GHz,\;\epsilon_r\;=\;13.3\;and\;\tau_f\;=\;-12.9\;ppm/^{\circ}C$ were obtained.

• 한국주조공학회지
• /
• 제18권3호
• /
• pp.254-261
• /
• 1998

Microstructure and mechanical properties of the low pressure die-cast Al wheels were investigated by microscope, image analyzer, NDT (non-destructive test), and tensile test. The variation of SDAS (secondary dendrite arm spacing), porosity per unit area, quality grade, and tensile properties with the mold temperatures were examined. SDAS was gradually decreased with a decrease in temperature. However, the lowest value of porosity per unit area was observed at the mold temperature of $405^{\circ}C$ and the optimum mold temperature was found to be $405^{\circ}C$. Besides, from the observation of pore morphology, it was also found that the pore formation was mainly caused by shrinkage during solidification. The tensile strength, elongation, and impact toughness were markedly decreased, however the yield strength was nearly constant. The decrease of mechanical properties is attributed to the increase of porosity.

• 대한기계학회논문집A
• /
• 제25권2호
• /
• pp.304-311
• /
• 2001

The present work examines the influence of surface coating on the temperature and the thermo-mechanical stress field produced by friction due to sliding contact. A two-dimensional transient model of a layered medium submitted to a moving heat flux is prsented. A solution technique based on the boundary element method employing the multiregion technique is utilized. Results are presented showing the influence of coating thickness, thermal properties, Peclet number, and mechanical properties. It has been shown that the mechanical properties and thickness of coating have a significant influence on the stress field, even for low temperature increase. The effects of the ratios of shear modulus become more important for low temperature increase than the effects of the ratios of other mechanical properties.

• 한국도로학회논문집
• /
• 제10권3호
• /
• pp.239-246
• /
• 2008

본 연구는 폐타이어 고무분말 개질 아스팔트(crumb rubber modified asphalt, CRMA) 공정조건에서 반응온도, 혼합반응시간 및 유연성 개질제의 영향을 조사하였다. 저온에서 아스팔트바인더와 개질 아스팔트의 온도 민감성과 접착특성은 침입도와 인장접착강도를 통하여 측정하였다. 유연제와 공정온도가 인장접착강도와 강인화 에너지의 중요한 요소임을 확인하였다. 더 높은 혼합온도와 연성 개질제에서 CRMA의 인장접착물성이 향상되는 것은 아스팔트바인더와 개질 아스팔트의 연성구조에 기인한다. CRMA의 물리적 특성의 개선은 CR과 아스팔트바인더간의 상용성에 있다. 유연제가 CR과 아스팔트바인더 안에 침투되어, 유연제에 의해 개질된 CRMA는 CRMA보다 접착특성이 증가하였음을 확인하였다.

• 한국군사과학기술학회지
• /
• 제22권2호
• /
• pp.215-223
• /
• 2019

A high temperature adhesive development which is crosslinked in low temperature is necessary for aerospace application because of thermal expansion mismatches of various substrates. For this purpose, we have designed and fabricated several formulations with high temperature epoxy resins, crosslinkers and additives considering various working conditions and high service temperature. As a result, some formulations showed higher adhesive strengths than Hysol EA 9394/C2 which is widely used for aerospace applications. We also have studied and summarized the mechanical properties of the best development adhesive in both room and high temperatures.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.346-347
• /
• 2005

In this study, in order to develop the low temperature sintering ceramics, PZT ceramics adding $MnO_2$, $B_2O_3$ were manufactured, and their piezoelectric and dielectric properties is investigated. The results of this study were gotten such as follows. The electromechanical coupling coefficient(kp) showed good properties on the whole, showed its maximum value 28.266 in specimens sintered at 1200[$^{\circ}C$]. The mechanical quality coefficient(Qm) showed its maximum value 162.61 in specimens sintered at 1200[$^{\circ}C$] and was increased by increasing sintering temperature. The dielectric constant showed the optimum values of 538.903 at specimen sintered at $1000^{\circ}C$.

• 한국식품과학회지
• /
• 제31권5호
• /
• pp.1216-1220
• /
• 1999

팽윤도와 용해도는 blanching time이 길어질수록 증가했으며 blanching 온도 $55^{\circ}C$가 $45^{\circ}C$ 보다 낮은 경향을 보였으며 blanching온도 $45^{\circ}C$/15분을 유지시킨 것이 가장 높은 팽윤도와 용해도를 보였고, 수분흡수지수와 수분용해지수는 각 온도에서 holding time이 길어질수록 상대적으로 증가하는 경향을 나타냈으며 수분흡수지수는 blanching 온도 $55^{\circ}C$/15분 유지한 것이, 수분용해지수는 blanching 온도 $45^{\circ}C$/30분 유지한 것이 가장 높은 경향을 나타내었다. Visco/amylograph 측정에서 최대점도는 온도와 시간에 많은 영향을 받는 것으로 나타났으며 blanching 온도 $55^{\circ}C$/60분 유지시킨 것이 가장 높은 점도를 나타내었다. 이와 같은 실험결과로 보아 blanching 온도와 시간이 밤에 존재하는 가용성성분의 변화와 함께 밤가루 내의 전분사슬과 밤가루 표면구조의 변화에 영향을 미쳐 호화 특성에 변화를 준 것으로 보인다. 따라서, blanching처리한 밤가루가 밤가공품의 중간소재로 사용함으로서 다양한 성질을 나타내는 과정으로 생각된다.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권5호
• /
• pp.453-460
• /
• 1997

In order to investigate the electrical conduction properties of polyethylene thin film for power cable with manufacturing methods, the thickness of specimen was the 30, 100[${\mu}{\textrm}{m}$] of LDPE and 200[${\mu}{\textrm}{m}$] of XLPE were manufactured. The experimental condition for conduction properties was measured until the breakdown occurs at temperature ranges from 30 to 110[$^{\circ}C$] and the electric field from 1$\times$10$^3$to 5$\times$10$^{6}$ [V/cm]. As for increase of temperature, the current density of LDPE was increased with constant ratio in low field, but changes with exponential function in high electric field. The tunnel current of pre-breakdown region is shifted toward low field as much as thermal excitation energy. At low electric field, the XLPE showed dominant electrical conduction properties by thermal excitation, and transformation of the electron was resisted by the crystal at high electric field.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.143-146
• /
• 1994

In older to investigate the properties of electric conduction in low density polyethylene(LDPE) for power cable, the thickness of specimen was the 30, 100($\mu\textrm{m}$) of LDPE. The experimental condition for conductive properties was measured until the breakdown occurs at temperature ranges from 30 to 110[$^{\circ}C$] and in the electric field of 1 to 5 ${\times}$10$^2$[Mv/m]. As for increase of temperature, the current density of LDPE was increased with constant ratio in low field, but changes with exponential function in high field. The tunnel current of pre-breakdown region is shifted toward low field as much as thermal excitation energy.

• 한국재료학회지
• /
• 제30권4호
• /
• pp.184-196
• /
• 2020

In this study, effects of carbon and nickel on microstructure and low temperature Charpy impact properties of HSLA (high strength low alloy) steels are investigated. To understand the complex phase transformation behavior of HSLA steels with high strength and toughness before and after welding processes, three kinds of HSLA steels are fabricated by varying the carbon and nickel content. Microstructure analysis, low temperature Charpy impact test, and Vickers hardness test are performed for the base metals and CGHAZ (coarse-grain heat affected zone) specimens. The specimens with the lowest carbon and nickel content have the highest volume fraction of AF, the lowest volume fraction of GB, and the smallest GB packet size. So, the low temperature Charpy absorbed energy of the CGHAZ specimen is the highest. The specimens with increased carbon and nickel content have the lowest volume fraction of AF, the highest volume fraction of GB, and the largest GB packet size. So, the low temperature Charpy absorbed energy of the CGHAZ specimen is the lowest.