• 한국수산과학회지
• /
• 제18권3호
• /
• pp.219-226
• /
• 1985

생선 부패에 의한 히스타민 발생을 저지하는 방법으로 방사선 조사 기술의 응용 가능성을 살펴보았다. 한국산 고등어를 선량 $0.1{\sim}l.0$ Mrad Co-60 방사선으로 조사한 후 0, 5, $10^{\circ}C$씩 각각 저장하였다. 저장기간 중 히스타민, 총 휘발산, 트리메틸아민 양의 변화와 총 미생물 수를 측정한 결과 다음과 같은 사실을 알았다. 1. 히스타민 함량의 변화는 $0^{\circ}C$ 이하에서 저장하였을 시 방사선 조사에 관계없이 심각하게 변화하지 않았으나 $5^{\circ}C$에서 저장하였을 시는 저선량 조사의 경우에도 저장 후기에 어육 100g당 10mg정도로 약간 증가하였다. $10^{\circ}C$ 저장시에는 저장 초기에 이미 히스타민이 축적되어 저장 35일째는 어육 1009당 827.5mg의 높은 양에 달 하였으나 방사선에 조사 (0.4 Mrad) 의하여 어육 100g당 5.7mg 정도로 현저하게 떨어졌다. 2. 방사선 처리는 초기의 미생물을 확실하게 사멸시키므로서 냉장 온도의 조건에서 히스타민 뿐 아니라 총 휘발산, 트리메틸아민의 생성을 억제하였다. 3. 방사선 조사 효과의 최저치는 0.2 Mrad 이었고 최고치는 0.5 Mrad 이었다. 0.5 Mrad 이상에서는 미생물의 억제 효과, 히스타민, 총 휘발산, 트리메틸아민의 생성을 현저하게 저해하여 방사선 효과가 컸으나 관능적인 면에서 좋지 못한 결과를 초래하였다. 반면 $0.5{\sim}1.0$ Mrad의 선량조사 시에는 신선 고등어의 붉은 부분과 횐 부분이 구별되지 않을 정도로 고등어 근육이 붉어졌다.

• 한국식품과학회지
• /
• 제4권2호
• /
• pp.100-105
• /
• 1972

방부제와 방사선조사와의 상승효과가 pork sausage의 저장성 및 그 품질에 미치는 영향을 조사하기 위해 AF-2와 potassium sorbate를 법정허용량의 전량, ${\frac{1}{2}},\;{\frac{1}{4}}$, 및 무첨가로 하고 0.25, 0.5, 0.75 Mrad별로 조사시킨 후 $5^{\circ}C와 $25^{\circ}C$에서 저장했다. 저장중 산패도 휘발성염기질소, 세균수, 및 pH의 변화를 측정하고 관능검사를 실시했다. 실험한 결과는 다음과 같다. 1) 방부제의 보존효과는 저온저장의 유익성을 보여 $5^{\circ}C$에서 저장한 ${\frac{1}{4}}$첨가 무조사구가 $25^{\circ}C$에서 저장한 전량첨가 0.25Mrad 조사구와 비등한 저장성을 보였다. 2) 조사취는 거의 인정할 수 없었으며 $25^{\circ}C$에서 저장한 0.75Mrad 조사구가 약간의 산패취를 보였다. 색택과 풍미는 저장온도에 따라 격심한 차이를 보였다. 3) 적정선량은 0.5Mrad로 인정되었으며 대조구보다 약 $2{\sim}3$배의 저장기간을 연장시켰다.

• 한국태양에너지학회 논문집
• /
• 제27권3호
• /
• pp.149-154
• /
• 2007

It is essential to know the heat transfer characteristics at the absorber plate of Flat-plate solar collector for optimum design. For flat-plate solar collector, it is difficult to experimentally study the effect for the Reynolds number of riser considering low mass flow rate being applied into the collector with one riser tube. So, this study were performed to show the heat transfer characteristics of flat-plate solar collector with single absorber plate and riser for various Reynolds number at riser using commercial code FLUENT 6.0. The base collector size is chosen with $0.4m^2$ as 0.2m by 2m with single riser in this study, Reynolds number at riser is from 200 to 1200 including about 530 at typical flat-plate collector with 10 risers considering the mass flow rate of 0.02kg/s per collector area for the certificate test Through the simulation, the results were presented as the temperature distribution at the absorber plate for various flow rate and solar irradiance conditions, then showed the effective length scale of the absorber plate The real solar irradiation condition is assumed as the constant heat flux condition of $500w/m^2$ considering the annual average solar irradiance in Korea.

• 열처리공학회지
• /
• 제24권2호
• /
• pp.77-81
• /
• 2011

Aluminum nitride (AlN) thin films were prepared by using nitrogen ion beam assisted reactive radio frequency (RF) magnetron sputtering on the glass substrates without intentional substrate heating. After deposition, the effect of nitrogen ion beam energy on the structural and optical properties of AlN films were investigated by x-ray diffraction (XRD), atomic force microscope (AFM) and UV-Vis. spectrophotometer, respectively. AlN films deposited with $N^+$ ion irradiation at 100 eV show the higher (002) peak intensity in XRD pattern than other films. It means that $N^+$ ion energy of 100 eV is the favorable condition for low temperature crystallization. AFM images also show that surface average roughness is increased from 1.5 to 9.6 nm with $N^+$ ion energy in this study. In an optical observation, AlN films which deposited by $N^+$ ion beam energy of 100 eV show the higher transmittance than that of the films prepared with the other $N^+$ ion beam conditions.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.306.1-306.1
• /
• 2016

ZnO semiconductor material has been widely utilized in various applications in semiconductor device technology owing to its unique electrical and optical features. It is a promising as solar cell material, because of its low cost, n-type conductivity and wide direct band gap. In this work ZnO/Si heterojunctions were fabricated by using pulsed laser deposition. Vacuum chamber was evacuated to a base pressure of approximately $2{\times}10^{-6}Torr$. ZnO thin films were grown on p-Si (100) substrate at oxygen partial pressure from 5mTorr to 40mTorr. Growth temperature of ZnO thin films was set to 773K. A pulsed (10 Hz) Nd:YAG laser operating at a wavelength of 266 nm was used to produce a plasma plume from an ablated a ZnO target, whose density of laser energy was $10J/cm^2$. Thickness of all the thin films of ZnO was about 300nm. The optical property was characterized by photoluminescence and crystallinity of ZnO was analyzed by X-ray diffraction. For fabrication ZnO/Si heterojunction diodes, indium metal and Al grid patterns were deposited on back and front side of the solar cells by using thermal evaporator, respectively. Finally, current-voltage characteristics of the ZnO/Si structure were studied by using Keithly 2600. Under Air Mass 1.5 Global solar simulator with an irradiation intensity of $100mW/cm^2$, the electrical properties of ZnO/Si heterojunction photovoltaic devices were analyzed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.247.1-247.1
• /
• 2016

Low-cost, high efficiency solar cells are tremendous interests for the realization of a renewable and clean energy source. ZnTe based solar cells have a possibility of high efficiency with formation of an intermediated energy band structure by impurity doping. In this work, ZnO/ZnTe:Cr and ZnO/i-ZnTe structures were fabricated by pulsed laser deposition (PLD) technique. A pulsed (10 Hz) Nd:YAG laser operating at a wavelength of 266 nm was used to produce a plasma plume from an ablated a ZnTe target, whose density of laser energy was 10 J/cm2. The base pressure of the chamber was kept at approximately $4{\times}10-7Torr$. ZnTe:Cr and i-ZnTe thin films with thickness of 210 nm were grown on p-Si substrate, respectively, and then ZnO thin films with thickness of 150 nm were grown on ZnTe:Cr layer under oxygen partial pressure of 3 mTorr. Growth temperature of all the films was set to $250^{\circ}C$. For fabricating ZnO/i-ZnTe and ZnO/ZnTe:Cr solar cells, indium metal and Ti/Au grid patterns were deposited on back and front side of the solar cells by using thermal evaporator, respectively. From the fabricated ZnO/ZnTe:Cr and ZnO/i-ZnTe solar cell, dark currents were measured by using Keithley 2600. Solar cell parameters were obtained under Air Mass 1.5 Global solar simulator with an irradiation intensity of 100 mW/cm2, and then the photoelectric conversion efficiency values of ZnO/ZnTe:Cr and ZnO/i-ZnTe solar cells were measured at 1.5 % and 0.3 %, respectively.

• 한국식품과학회지
• /
• 제5권2호
• /
• pp.89-94
• /
• 1973

육제품(肉製品)의 착색제(着色劑)로 사용되고 있는 식용적색2호(食用赤色2號)와 황색4호(黃色4號)의 가열(加熱) 및 감마(線) 조사(照射)에 의한 변색정도(變色程度)와 첨가물(添加物)에 의한 영향을 model system 을 사용하여 관찰하였다. 황색2호(黃色2號)는 가열(加熱)에 의하여 뚜렷한 변색(變色)을 나타내지 않았으나 황색4호(黃色4號)는 Na-TPP 와 cinnamon oil 을 첨가(添加)하므로써 약간의 퇴색(褪色)을 하였다. 감마선(線) 조사(照射)에 의한 영향은 선량(線量)의 증가와 더불어 퇴색(褪色)하였으며 $NaNO_2$ 와 ascorbic acid 는 퇴색(褪色)을 억제하는 반면 Na-TPP 와 cinnamon oil 은 오히려 촉진하는 경향을 보였다. 이러한 퇴색도(褪色度)는 적색2호(赤色2號)보다는 황색4호(黃色4호(號)가 더욱 현저하였으며 $5^{\circ}C$ 보존(保存)보다는 $25^{\circ}C$보존(保存)에서 퇴색(褪色)이 촉진되었다.

• 한국토양비료학회지
• /
• 제50권4호
• /
• pp.306-317
• /
• 2017

Unmanned aerial vehicles (UAVs) became popular platforms for the collection of remotely sensed data in the last years. This study deals with the monitoring of multi-temporal onion growth with very high resolution by means of low-cost equipment. The concept of the monitoring was estimation of multi-temporal onion growth using normalized difference vegetation index (NDVI) and meteorological factors. For this study, UAV imagery was taken on the Changnyeong, Hapcheon and Muan regions eight times from early February to late June during the onion growing season. In precision agriculture frequent remote sensing on such scales during the vegetation period provided important spatial information on the crop status. Meanwhile, four plant growth parameters, plant height (P.H.), leaf number (L.N.), plant diameter (P.D.) and fresh weight (F.W.) were measured for about three hundred plants (twenty plants per plot) for each field campaign. Three meteorological factors included average temperature, rainfall and irradiation over an entire onion growth period. The multiple linear regression models were suggested by using stepwise regression in the extraction of independent variables. As a result, $NDVI_{UAV}$ and rainfall in the model explain 88% and 68% of the P.H. and F.W. with a root mean square error (RMSE) of 7.29 cm and 59.47 g, respectively. And $NDVI_{UAV}$ in the model explain 43% of the L.N. with a RMSE of 0.96. These lead to the result that the characteristics of variations in onion growth according to $NDVI_{UAV}$ and other meteorological factors were well reflected in the model.

• 한국세라믹학회지
• /
• 제39권6호
• /
• pp.535-539
• /
• 2002

이 연구는 저온균일침전법으로 제조한 루타일 상의 TiO$_2$ 나노분말을 이용하여 AgNO$_3$ 수용액 중에서 광반응 조건에 따른 Ag 이온의 광흡차 특성을 고찰하였다. 자연광을 조사하였을 경우 흡척되는 Ag의 양이 9.32ppm이며 Ag 이온의 환원 속도는 느리지만 루타일 TiO$_2$ 나노분말이 자연광에서도 광촉매 반응을 일으킨다는 것을 확인하였다. 암반응 하에서도 TiO$_2$ 나노분말 자체의 밤송이 형태 때문에 Ag흡착 반응이 진행되었으며, UV를 적용할 때에는 120분 이내에 Ag 이온이 전부 흡착되었다. 광촉매 반응이 더 중요시 됨을 알수 있었다. 흡착 반응속도상수와 흡착 평형속도상수를 계산한 결과, 각각 0.0004g/min와 1494.20(120 $m^2$/g)를 나타내었다.

• 한국환경과학회지
• /
• 제19권3호
• /
• pp.379-387
• /
• 2010

Sediments of Little Scioto (LS) River in Ohio was contaminated by poor disposal of creosote from Baker Wood Creosoting Facility. Among the primary compounds of creosote, Polycyclic Aromatic Hydrocarbons (PAHs) are the most common ingredient PAHs are known for toxic, carcinogenic and mutagenic compounds. There are many difficulties to remove the PAHs in nature environment because their characteristics are having a less water-solubility, volatile and low mobility properties as increasing the molecular weight. The generation of hydroxyl radicals (${\cdot}OH$) and hydrogen peroxide ($H_2O_2$) forms as well as high temperature (5000 K) and pressure (1000 atm) by a physico-chemical effects of ultrasound during a cavitation collapse can promote the degradation and desorption of PAHs in sediment And it can also produces shock wave and microjets which are able to change the size and surface of particle in solid-liquid system as one of physical effects. Therefore, we explored to understand the role of particle size, the effect of elimination for PAHs concentration by ultrasound and optimize the conditions for ultrasonic treatment. The condition of various size of particles (> $150{\mu}m$, < $150{\mu}m$) and solid-liquid ratio (12.5g/L, 25g/L) for the treatment was considered and ultrasonic power (430 W/L) with liquid - hexane extraction and microwave extraction method were applied after ultrasound treatment.