• Parasites, Hosts and Diseases
• /
• 제29권3호
• /
• pp.235-244
• /
• 1991

강원도 원주 지역 학등에 대하여 환경을 달리하는 4군을 adhesive cellotape anal swab 법으로 충란 검출률을 조사하였고 감염 집단에 대하여 구충제의 반착 투여로 감염률의 감소 현황과 재감염 을 관찰하였다. 1. 충란 검출률(1회 검사)은 19.9%(1,262명중 251명 양성, 남 19.7%, 여 20.1%)였으며 지역과 환경이 다른 산간 지역 13.0%, 농촌 지역 11.9%, 중 도시 15. l%, 집단생활 아동 61.9%로 나타났다. 2. 국민학생은 저학년(유치만 및 1,2학년생)에서 검출률(26.2∼32.2%)이 높았고 그 외는 최저 (6학년 생) 13.6%이었다. 3. 반복 검사(4∼5일 간격 3회)에 의한 누적 검출률은 높았으나(최초 58.5%에서 70.8%로) 매회의 검출률은 비슷한 비율(50.0%∼59.2%)을 보였다. 4. 반복검사 3회의 누적 검출률(70.8%, 130명 검사) 중 계속 양성자는 평균 39.2%이었다. 그리고 충란 검출률이 높은 군(87.5%)일수록 그 비율(71.9%)은 높았다. 5. 충란 양성자 17명에서 구충제 투여로 2,609마리 (성비는 12.4 : 1)의 충체를 수집하였다. 이는 평균 153마리 (4∼824범위) 감염에 해당된다. 6. 집단에 대하여 매회 충란 양성자에만 구충제를 투여 (3주간격 6회)한 바 양성률은 최초 54.8% (180명중)에서 15주 후에 2.3%로 감소되었으나 완전한 구충 효과는 얻지 못하였다. 그러나 매회 전 집단(양성자, 음성자 같이)에 대한 구충제 투여 (3주간격)에서는 4회 (9주째) 검사때 전부 음성으로 나타났다. 7. 국민학교 학생 양성자의 형제자매 중 충란 검출률은 70.0%(40명 중 28명)이었다. 가족 단위로는 69.7%의 같은 비율로 높았다. 이상으로 요충 감염은 아직까지 높은 상태임을 알았고 예방을 위한 집단 구충에는 전 집단에 대한 3회 이상의 반복구충이 효과적이었다. gas layers is also made. Low resolution spectral intensities at the boundary are obtained for uniform, parabolic and boundary layer type temeprature profiles using the obtained for uniform, parabolic and boundary layer type temperature profiles using the obtained WSGGM's with 9 gray gases. The results are compared with the narrow band spectral intensities as obtained by a narrow band model-based code with the Curtis-Godson approximation. Good agreement is found between them. Local heat source strength and total wall heat flux are also compared for the cases of Kim et al, which again gives promising agreement.면적 306~453$\textrm{cm}^2$, 유색계의 경우 수당면적 340~453$\textrm{cm}^2$ 일 때 경제능력을 제대로 발휘할 수 있고 경제성이 있는 것으로 나타났다. 첨가구가 높은 경향이 있었다8.4%. 79.7% 그리고 80.2%였다. 5. 체중구성요소들의 중상비율간의 상관근도는 계통간를 차이를 보이지 않았다. 체중구성요소중 체중과 상관정도가 높은 부위들은 방혈양, 두부, 각부, 흉부, 퇴경부등이였다. 복부지방(%)은 어느 계종에서나 주로 불가식내장과 높은 유의상관을 보였으나, 가식부위와의 상관정도는 매우 낮게 나타났다.ctivity of these

• Restorative Dentistry and Endodontics
• /
• 제28권1호
• /
• pp.89-99
• /
• 2003

The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.