• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.29-34
• /
• 2011

This study investigates the potential of DME/Diesel dual fuel engine for reducing emissions with same power. Dual fuel engine controls the combustion using two different fuels, DME and diesel with different auto-ignition timings. In the previous work, the caracteristics of combustion and emissions under single cylinder engine and ignition is done by compression ignition. Pre-mixture is formed by injecting low-pressure DME into an intake manifold and high-pressure fuel (diesel or DME) is injected directly into the cylinder. Both direct diesel injection and port fuel injection reduced the significant amount of Smoke, CO and NOx in the homogeneous charge compression ignition engine due to present of oxygen in DME. In addition, when injecting DME directly in cylinder with port DME injection, there is no changes in emissions and energy consumption rate even operated by homogeneous charge compression ignition.

• 한국재료학회지
• /
• 제24권2호
• /
• pp.81-86
• /
• 2014

The nitrogen solubility and nitride capacity of $CaO-SiO_2-Al_2O_3-MgO-CaF_2$ slag systems were measured by using gas-liquid equilibration at 1773K. The nitrogen solubility of this slag system decreased with increasing CO partial pressure, with the linear relationship between nitrogen contents and oxygen partial pressure being -3/4. This system was expected to show two types of nitride solution behavior. First, the nitrogen solubility decreased to a minimum value and then increased with the increase of CaO contents. These mechanisms were explained by considering that nitrogen can dissolve into slags as "free nitride" at high basicities and as "incorporated nitride" within the network at low basicities. Also, the basicity of slag and nitride capacity were explained by using optical basicity. The nitrogen contents exhibited temperature dependence, showing an increase in nitrogen contents with increasing temperature.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 하계학술연구발표회 및 한.일 공동심포지엄
• /
• pp.194-194
• /
• 2003

As a result of the recent miniaturization an enhancement in the performance of thin film inductors and thin film transformers, there are increased demands for the thin films with high magnetic permeability in the high frequency range, high saturation magnetization, in high electrical resistivity, and low coercive force. In order to improve high frequency properties, we will investigate anisotropy field by shape and size of pattern. The Fe-Al-O thin films of 16mm and 1 $\mu\textrm{m}$ thickness were deposited on Si wafer, using RF magnetron reactive sputtering technique with the mixture of argon and oxygen gases. The fabricating conditions are obtained in the working partial pressure of 2mTorr, O$_2$ partial pressure of 5%, input power of 400W, and Al pellets on an Fe disk with purity of 99,9%. Magnetic properties of the continuous films as followed: the 4$\pi$M$\_$s/ of 19.4kG, H$\_$c/ of 0.6Oe, H$\_$k/ of 6.0Oe and effective permeability of 2500 up to 100㎒ were obtained. In this work, we expect to enhance effect of magnetic anisotropy on patterned of Fe-Al-O thin films.

• Journal of Microbiology and Biotechnology
• /
• 제10권3호
• /
• pp.367-374
• /
• 2000

The composition of dissolved gases and nutrients in a liquid medium were determined for establishment of the optimum conditions for in vitro culture of Helicobacter pylori. A microaerobic condition facored by the organism was prepared by adjusting the partial pressure of the gas, agitation speed, and viscosity of the medium. The gaseous concentrations were controlled by utilizing CampyPak Plus that reduced oxygen while augmenting carbon dioxide. Agitation of the broth facilitated the oxygen transfer to the cells, yet inhibited the growth at high rates. An increase of viscosity in the medium repressed the culture although this variable was relatively insignificant. The chemical constituents of the liquid broth were examined to establish an economic model for H. pylori cultivation. The microbe required a neutral pH for optimum growth, and yet was also able to proliferate in an acidic condition, presumably by releasing the acidity-modulating enzyme, urease. Cyclodextrin and casamino acid were investigated as growth enhancers in place of serum, while yeast extract unexpectedly inhibited the cells. A low concentration of glucose, the unique carbon source for the organism, increased the cell density, yet high concentrations resulted in an adverse effect. Under optimally dissolved gas conditions, the cell concentration in brucella broth supplemented with serum substitutes and glucose reached $1.6{\times}10^8$ viable cells/ml which was approximately 50% higher than that obtained in the liquid medium added with only cyclodextrin or serum.

• 청정기술
• /
• 제12권3호
• /
• pp.138-144
• /
• 2006

저압에서 용량성 라디오 주파수 방전을 이용하여 메탄을 합성가스로 전환시키는 반응을 고찰하였다. 플라즈마에서 발생된 높은 에너지를 갖는 전자들이 메탄분자와 산소를 함유하고 있는 기체 분자들과 충돌에 의해 합성가스로 전환되었다. 입력전력, 함산소화합물의 종류, 함산소화합물과 메탄의 조성이 메탄 전환율 및 수소와 일산화탄소의 수율에 미치는 영향을 살펴보았다. 메탄 전환율은 최대 100%이었으며, 합성가스이외의 다른 화합물들은 거의 생성되지 않았다. 입력전력이 증가함에 따라 메탄전환율과 합성가스의 수율이 증가하였으며, 함산소화합물의 종류에 따라 각각 다른 조성의 합성가스를 생성할 수 있었다. 메탄과 함산소화합물을 함께 반응시킴으로써 순수한 합성가스를 제조할 수 있었는데 함산소화합물의 종류에 따라 합성가스의 조성을 조절할 수 있었으며 불순물이 거의 없는 순수한 생성물을 얻을 수 있었다.

• 한국재료학회지
• /
• 제9권7호
• /
• pp.657-662
• /
• 1999

기판온도 $320^{\circ}C$에서 알루미나 기판 위에 형성한 NTC 써미스터용 Mn-Ni계 산화물 박막의 산소가스 농도 변화와 막 형성 후 열처리에 따른 미세구조, 결정상 비저항, B정수 변화에 관하여 연구하였다. 미세구조는 주상 구조(columnar structure)를 지녔으며 열처리 온도가 증가함에 따라 $700^{\circ}C$ 부근에서 등축 결정립 (equiaxed grain) 형태의 미세구조로 바뀌기 시작하였다. 박막의 결정상은 대부분 입방 스피넬 (cubic spinel) 상과 입방 $Mn_2$$O_3$, 상이 공존하였으며 산소농도 0.16%~0.7%의 경우 $800^{\circ}C$에서 열처리하였을 때 입방 스피넬 상만이 존재하였다. 분위기 산소의 농도가 증가함에 따라 비저항과 B정수도 급격하게 감소하다가 다소 증가하였으며, $600^{\circ}C$-$700^{\circ}C$ 로 열처리할 경우 이 값들이 대체로 낮고 안정된 특성을 보였다.

• 공업화학
• /
• 제25권4호
• /
• pp.386-391
• /
• 2014

본 연구에서는 상압 저온 코로나 방전 플라즈마를 화산암재(스코리아) 분말의 살균에 적용하였다. 스코리아 분말에 Escherichia coli (E. coli) 배양액을 살포하여 균일하게 혼합한 후, 코로나 방전 플라즈마 특성 인자인 방전전력, 방전시간, 주입기체, 전극간격 등의 조건을 변화시키며 E. coli 살균효율을 조사하였다. 실험 결과 상압 저온 코로나 방전 플라즈마는 분말상의 스코리아 살균에 아주 효과적인 것으로 나타났으며, 방전전력 15 W에서 5 min 동안 살균한 결과 E. coli가 99.9% 이상 사멸하였다. 방전전력, 방전시간, 인가전압이 증가할수록 사멸율이 향상되었다. 반응기에 주입되는 기체의 종류에 따른 살균력 실험 결과, 산소 > 모사공기(산소 20%) > 질소 순으로 나타났다. 코로나 방전 플라즈마에 의한 E. coli 살균은 자외선과 활성산화종(산소라디칼, OH라디칼, 오존 등)에 의한 세포막 침식 및 에칭, 그리고 플라즈마 방전 스트리머에 의한 대장균 세포막 파괴로 설명할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1407-1409
• /
• 1995

This paper describes ozone concenteration($O_{3con}$), ozone generation($O_{3g}$) and ozone yield($O_{3Y}$) of lamp type ozonizer which be performed a role of lighting source and ozonizer. OLamp is consist of two of low pressure mercury lamps. The important conclusions obtained from this paper are as follows, The more quality of supplied gas(Q) decrease, the higher $O_{3con}$ rise. The more quality of supplied gas(Q) increase, the higher $O_{3g}$ some rise. When supplied oxygen 10[l/min] obtained 4,010[mg/kwh] $O_{3Y}$. The Echerichia coli which is reacted on ozone can be sterilized about 95[%].

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.162.1-162.1
• /
• 2015

The use of plasma has increased in bio-application field in recent years. Particularly, water treated by arc discharge or atmospheric pressure plasma has been actively utilized in bio-industry. In this study, we have developed a plasma activated water generating system. For this system, two kinds of plasma sources; dielectric barrier discharge (DBD) plasma and arc discharge plasma have been used. The discharge energy was calculated using the breakdown voltage and current, and the emission spectrum was measured to investigate the generated reactive species. We also analyzed the amount of reactive oxygen and nitrogen species in water using the chemical methods and nitric oxide sensor. Finally, the influence of plasma generated reactive species on the germination and growth of spinach (Spinacia oleracea) was investigated. Spinach is a green leafy vegetable that contains a large amount of various physiologically active organic compounds. However, it is characterized with a low seed germination rate.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 센서 박막재료
• /
• pp.15-17
• /
• 2001

A new possibility of our atmospheric cold plasma torch has been examined on the surface treatment of an air-exposed vulcanized rubber compound. The plasma treatment effect was evaluated by the bondability with another rubber compound using a polyurethane adhesive.