• Composites Research
• /
• 제18권4호
• /
• pp.21-26
• /
• 2005

탄소나노튜브 및 탄소나노섬유/에폭시 복합재료의 비파괴 손상감지능 및 응력전달 메카니즘이 전기-미세기계적 실험법을 통하여 조사되었다. 전기-미세기계적 실험법은 균일한 반복하중 하에서 전기저항을 측정함으로써 탄소나노복합재료의 감지반응을 평가하는 것이다. 큰 탄소섬유 부피 분율이 있는 복합재료가 에폭시 자체나 작은 부피 분율에 비하여 매우 큰 인장강도 특성을 보여주었다. 탄소나노섬유 복합재료는 제한된 온도범위 내에서 습도 감지능을 보여주었다. 형상비가 작은 탄소나노섬유 복합재료는 많이 첨가된 부피량에 기인하여 보다 큰 겉보기 탄성계수를 보여 주었다. 열처리된 전기 방사된 PVDF 나노섬유는 증대된 결정화에 기인하여 미처리의 경우보다 큰 기계적 특성을 보여 주었으며, 그 반면에 응력 감지능은 열처리의 경우에 감소를 보여 주었다. 전기 방사된 나노섬유는 또한 응력전달 뿐만 아니라 습도 및 온도에 대한 감지능도 나타내었다. 탄소나노튜브. 탄소나노섬유 및 전기 방사된 PVDF 나노섬유는 나노복합재료의 다기능에 응용할 수 있을 것이다.

• 에너지공학
• /
• 제11권3호
• /
• pp.237-246
• /
• 2002

한국형차세대원자로 APR-1400의 안전감압계통이 작동하면 물, 공기 및 증기가 sparger를 통해 격납건물 내 핵연료재장전 수조로 차례로 방출된다. 방출 과정 중 생기는 여러 현상 중에서 수조 내의 공기 기포군은 저주파, 고진폭의 진동 하중을 발생하며, 주파수가 침수 구조물의 고유 주파수와 거의 같은 경우에는 구조물에 심각한 영향을 줄 수 있다. 이러한 현상은 복잡하기 때문에 주파수와 하중에 대한 규명은 주로 실험에 의존해 왔으며 수치해석적 연구는 이루어지지 않았다. 본 연구에서는 sparger를 통해 수조 내로 방출되는 공기 기포군의 거동에 대한 수치해석을 상용 열수력 해석 코드인 FLUENT Version 4.5를 사용하여 수행하였다. 다상유동 해석모델중 VOF(Volume Of Fluid)모델을 사용하여 물, 공기 및 증기 등의 다상유동을 모의하였다. 해석결과를 sparger 개발을 위해 ABB-Atom이 수행하였던 실험결과와 비교하여 만족할만한 결과를 얻었다.

• 공업화학
• /
• 제7권5호
• /
• pp.977-984
• /
• 1996

실관막 모듈을 이용한 액-액추출은 반응기 단위부피당 표면적이 크므로 신속히 진행된다. 이러한 실관막내에서 추출제와 원료액은 빠른 속도로 접촉하며 두 흐름이 완전히 독립적이므로 부하나 편류현상이 일어나지 않는다. 본 연구에서는 실관막을 이용하여 수용액으로부터 중금속들을 추출하기 위한 추출제들의 선택성을 고찰하였다. 또한, 실관막 내에서 용질의 물질전달에 미치는 분배비의 영향을 확인하기 위하여, 분배비와 총괄물질전달계수를 비교하였다. 이로부터, 분배비가 높은 계는 낮은 계에 비해 실관막 모듈 내에서 물질전달에 미치는 분배비의 영향이 미약함을 알 수 있었다.

• 한국축산시설환경학회지
• /
• 제11권2호
• /
• pp.97-102
• /
• 2005

Anaerobic decomposition is one of the most common processes in nature and has been extensively used in waste and wastewater treatment for several centuries. New applications and system modifications continue to be adapted making the process either more effective, less expensive, or suited to the particular waste in question and the operation to which it is to be applied. Animal manure is a highly biodegradable organic material and will naturally undergo anaerobic fermentation, resulting in release of noxious odors, such as in manure storage pits. Depending on the presence or absence of oxygen in the manure, biological treatment process may be either aerobic or anaerobic. Under anaerobic conditions, bacteria carry on fermentative metabolisms to break down the complex organic substances into simpler organic acids and then convert them to ultimately formed methane and carbon dioxide. Anaerobic biological systems for animal manure treatment include anaerobic lagoons and anaerobic digesters. Methane and carbon dioxide are the principal end products of controlled anaerobic digestion. These two gases are collectively called biogas. The biogas contains $60\~70\%$ methane and can be used directly as a fuel for heating or electrical power generation. Trace amounts of ammonia and hydrogen sulfide ($100\~300\;ppm$) are always present in the biogas stream. Anaerobic lagoons have found widespread application in the treatment of animal manure because of their low initial costs, ease of operation and convenience of loading by gravity flow from the animal buildings. The main disadvantage is the release of odors from the open surfaces of the lagoons, especially during the spring warm-up or if the lagoons are overloaded. However, if the lagoons are covered and gases are collected, the odor problems can be solved and the methane collected can be used as a fuel. Anaerobic digesters are air-tight, enclosed vessels and are used to digest manure in a well-controlled environment, thus resulting in higher digestion rates and smaller space requirements than anaerobic lagoons. Anaerobic digesters are usually heated and mixed to maximize treatment efficiency and biogas production. The objective of this work was to review a current anaerobic biological treatment of animal manure for effective new technologies in the future.

• 비파괴검사학회지
• /
• 제25권4호
• /
• pp.274-286
• /
• 2005

본 연구에서는 편측노치를 갖는 단일 hi판 및 유리섬유/알루미늄 혼합 적층판에 대해 인장하중하의 파괴거동에 따른 음향방출(AE) 특성을 살펴보았다. 단일 알루미늄의 파괴시에 발생하는 AE신호는 저주파수 대역을 갖는 신호와 고주파수 대역을 갖는 신호의 2가지 형태로 분류될 수 있었다. 고주파수 대역의 AE는 0.45mm 변위 보다 큰 후반부 하중단계에서 주로 검출되었다. 유리섬유/알루미늄 혼합 적층판의 경우에는, 고진폭의 긴 유지시간의 신호가 FFT 주파수 해석에 의거하여 거시적인 균열진전이나 A1층과 섬유층 사이의 층간분리에 해당하는 신호로 추정되었다. 위와 같은 AE신호의 해석결과와 광학현미경 및 초음파 스캔에 의한 파괴관찰에 의거하여 섬유층 배향에 따라 상이한 섬유/알루미늄 적층판의 파괴거동과 관련된 AE특성을 규명하였다.

• 한국강구조학회 논문집
• /
• 제13권4호
• /
• pp.363-372
• /
• 2001

본 연구의 목적은 보항복형 비가새 골조의 $P-{\Delta}$영향을 실험적 방법을 통하여 조사하는데 있다. 이를 위하여 4개의 1층 1스팬의 보항복형 비가새 골조에 대한 가력실험을 실시하였다. 실험의 변수로는 기둥의 강성과 축력비를 적용하였다. 실험결과 저축력 상태의 보항복형 비가새 골조에서는 축력의 정량적인 크기가 $P-{\Delta}$효과로서 골조의 안정성에 영향을 미치는 것으로 나타났다. 그리고 최대수평하중은 기둥의 강성과 지점 회전강성에 비례하여 증가하며 저축력상태의 보항복형 비가새 골조는 붕괴가구 형성이 비교적 안정적인 상태에서 이루어짐을 알 수 있었다. 그리고 한계상태설계기준의 $B_2$ 계수는 골조의 비탄성거동시 $P-\Delta$효과를 적절히 고려하지 못하는 것으로 판단된다.

• 상하수도학회지
• /
• 제26권6호
• /
• pp.889-896
• /
• 2012

In this study, simulation results of nitrogen and phosphorus removals and microbial activities for an $A_2O$ process in wastewater treatment plant are presented by using Activated Sludge Models (ASMs). Simulations were performed using pre-calibrated model and layout implemented in GPS-X simulation software. The models were used to investigate variations of SRT, water temperature, DO and C/N ratio effect on nutrients removal and microbial activity. According to the simulated results, the successful nitrification required SRT higher than 10.3 days, whereas increase of $NO_3$-N loading in the anaerobic reactor caused phosphorus release by PAOs; the effluent $NH_4$-N showed rapid change between $12^{\circ}C$(21.7 mg/L) and $13^{\circ}C$(3.2 mg/L); the effluent phosphorus was increased up to 1.9 mg/L at water temperature of $25^{\circ}C$; the DO increase was positive for heterotrophs and autotrophs growths but negative for PAOs growth; the PAOs showed low activity when C/N ratio was lower than 2.5. The experimental results indicated that the calibrated models can assure the prediction quality of the ASMs and can be used to optimize the $A_2O$ process.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1286-1286
• /
• 2001

Despite extensive theoretical and experimental studies the structure of the protein-solvent interface is subject of many controversy. Understanding the processes that occur in aqueous solution requires understanding of the solvent influence on the structure of protein. The aim of this study is to investigate the applicability of NIR methods in the study of hydration phenomena in protein solutions. Temperature-induced changes in NIR spectra of -lactoglobulin (BLG) in aqueous solutions have been investigated by means of two-dimensional correlation spectroscopy (2DCOS) and principal component analysis (PCA). With the temperature increase the balance of forces between the BLG's interaction with itself and the BLGs interaction with its environment is disrupted leading to BLG unfolding. Significant differences of 2D signals and distinct discrepancies of loading on PC1 and PC2 were observed as a result of temperature increase. In the native folded conformation of BLC, most of the nonpolar amino acids are hidden in the centre of the structure, out of contact with water molecules, while charged groups are outside, in the contact with water. The polar groups promote low density Ih-type structure in the water outside this first hydration shell. When BLG unfolds it assumes a more extended configuration on which the previously buried nonpolar groups are exposed to water and promote the higher density II-type structure outside its first shell. Detailed assignments of bands attributed to the bulk water, different states of the hydrated water and the changed conformation of BLG are proposed.

• Tribology and Lubricants
• /
• 제26권1호
• /
• pp.14-20
• /
• 2010

Tribological properties of nanoporous structured alumina film was investigated. Alumina film (AAO: anodic aluminum oxide) of $60{\mu}m$ thickness having nanopores of 45 nm diameter with 105 nm interpore-diatance was fabricated by mild anodization process. Reciprocating ball-on-flat sliding friction tests using 1 mm diameter steel ball as a counterpart were carried out with wide range of normal load from 1 mN to 1 N in an ambient environment. The morphology of worn surfaces were analyzed using scanning electron microscopy. The friction coefficient was strongly influenced by the applied normal load. Smooth layer patches were formed on the worn surface of both AAO and steel ball at relatively high load (100 mN and 1 N) due to tribochemical reaction and compaction of wear debris. These tribolayers contributed to the lower friction at high loads. Extremely thin layer patches, due to mild plastic deformation of surface layer, were sparsely distributed on the worn surface of AAO at low loads (1 mN and 10 mN) without the evidence of tribochemical reaction. Delaminated wear particles were generated at high loads by fatigue due to repeated loading and sliding.

• Journal of Pharmaceutical Investigation
• /
• 제33권4호
• /
• pp.319-322
• /
• 2003

Many studies have been attempted to overcome the problems of paclitaxel related to the extremely low aqueous solubility of paclitaxel and the unexpected side-effects caused by $Cremophor^{\circledR}$ EL in a commercial paclitaxel formulation, $Taxol^{\circledR}$. In order to formulate a new delivery system suitable for intravenous administration without toxic excipients, in this study, paclitaxel was incorporated into solid lipid nanoparticles (Px-SLN) by hot homogenization technique using a microfluidizer. Particle size and zeta potential were measured by a Zetasizer. In vitro drug release experiment was performed by a dialysis diffusion method. Each Px-SLN or $Taxol^{\circledR}$ was intravenously administered to the male Sprague-Dawley rats at a dose of 5 mg/kg as paclitaxel. Blood samples were deproteinated with acetonitrile and assayed for paclitaxel by the validated HPLC/MS/MS method. Mean particle size and zeta potential were measured as 72.1 nm (< Polydispersity 0.3) and -41.5 mV, respectively. The content of paclitaxel in SLN was 1.42 mg/ml and the drug loading efficiency was $71.2{\pm}4.3%$. The $AUC_t$ of Px-SLN was 3.4-fold greater than that of $Taxol^{\circledR}$. The Px-SLN might be a promising candidate for an alternative formulation for the parenteral delivery of paclitaxel.