• Journal of Aquaculture
• /
• v.21 no.1
• /
• pp.1-6
• /
• 2008

We determined the effects of dietary supplements for lactic acid bacteria(LAB) such as Lactobacillus brevis(Lb) and Lactobacillus plantarum(Lp) in juvenile rockfish Sebastes schlegeli cultured in flow-through system for 10 weeks. The experimental diets contained $10^4cfu/g,\;10^6cfu/g\;and\;10^8cfu/g$ level each LAB(Lb-4, Lb-6, Lb-8 or Lp-4, Lp-6, Lp-8), respectively. The effects of LAB supplementation was determined by various factor such as weight gain(WG), specific growth rate(SGR), feeding efficiency(FE) and blood assay. For rearing experiment, Lp-8 treatment had significantly high growth rate than control diet treatment. However, all Lb treatment had no significance effect with control diet treatment. In case of the blood assay, hematocrit(Ht) and hemoglobin(Hb) of fish were not affected by LAB supplemental levels. On the other hand, total cholesterol in plasma of Lb-8, Lp-6 and Lp-8 treatments were significantly low than the control diet treatment. We verified the influence of LAB which was originated from species specificity and amount in diet. Consequently, the dietary supplementation as $10^8cfu/g$ level of L. plantarum could be of help for growth enhancement to the juvenile rockfish.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.125-135
• /
• 1993

The safe and efficient operation of nuclear plants is recognized to be accomplished through the application of plant automation using digital technology, which is one of main targets of the next generation nuclear plants. For plant level automation, it is first required that each major subsystem be digitalized, and the steam generator water level control system is discussed in this study. The transfer functions between inputs and the level are derived by employing the thermal hydraulic model of the steam generator and are applied to the analysis of the current three-element control system. Since the control scheme in this study includes the steam generator itself as a process plant, the system order is high and the numerical instability arises in digitalizing. Together with this, the unreliability of the feedwater feedback signal at low power level leads to the proposal of a two-element control system with a proper digital controller. The digital PI controller developed for this system has the initial power adaptive gain and integration time constant. And it makes the overall system response satisfy the stability and other necessary control specifications simultaneously. Since the two-element control system using this controller depends on the initial power only, it is simple to define and it shows a similar level response behavior to that of its corresponding analog system.

• Journal of the Korean Vacuum Society
• /
• v.20 no.2
• /
• pp.77-85
• /
• 2011

The silicon-germanium (SiGe) alloy, which is compatible with silicon semiconductor technology and has a smaller band gap and a lower thermal conductivity than silicon, has been used to fabricate electronic devices such as transistors, photodetectors, solar cells, and thermoelectric devices. This paper reviews the application of SiGe alloys to electronic devices and related technical issues. Since the SiGe alloy comprises germanium whose band gap is smaller than silicon, its band gap is also smaller than that of silicon irrespective of the ratio of silicon to germanium. This narrow band gap of SiGe enables the base thickness of bipolar transistors to decrease without a loss in current gain so that it is possible to improve the speed of bipolar transistors by adopting the SiGe-base. In addition, the conversion efficiency of solar cells is enhanced by the absorption of long-wavelength light in the SiGe absorption layer. Phonon scattering caused by the irregular distribution of alloying elements induces the lower thermal conductivity of SiGe than those of pure silicon and germanium. Because a thin film layer with a low thermal conductivity suppresses thermal conduction through a thermal sink, the SiGe alloy is considered to be a promising material for silicon-based thermoelectric systems.

• Journal of KIISE:Information Networking
• /
• v.30 no.1
• /
• pp.75-81
• /
• 2003

User authentication, including confidentiality, integrity over untrusted networks, is an important part of security for systems that allow remote access. Using human-memorable Password for remote user authentication is not easy due to the low entropy of the password, which constrained by the memory of the user. This paper presents a new password authentication and key agreement protocol suitable for authenticating users and exchanging keys over an insecure channel. The new protocol resists the dictionary attack and offers perfect forward secrecy, which means that revealing the password to an attacher does not help him obtain the session keys of past sessions against future compromises. Additionally user passwords are stored in a form that is not plaintext-equivalent to the password itself, so an attacker who captures the password database cannot use it directly to compromise security and gain immediate access to the server. It does not have to resort to a PKI or trusted third party such as a key server or arbitrator So no keys and certificates stored on the users computer. Further desirable properties are to minimize setup time by keeping the number of flows and the computation time. This is very useful in application which secure password authentication is required such as home banking through web, SSL, SET, IPSEC, telnet, ftp, and user mobile situation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.506-510
• /
• 2004

A torque transmission system composed of several gears and couplings is flexible. In order to get an exact response of motor, the torsional vibration due to an unexpected change of motor speed must be suppressed. Therefore, it is very important that motor control suppress vibration. Various methods to control it including dual inertia system are proposed. Specially, the method of vibration suppression is that vibration can be suppressed to fee㏈ack the estimated torsion torque via the disturbance observer filter being of normal filter. The suitable Proportional controller and coefficient parameter can be designed using CDM and the torsional vibration also be suppressed, but it has a low degree of adaptability to disturbance. The PID controller can be designed easily, but makes the excessive overshoot and oscillation for system response in the early period. To resolve these problems, simple and practical PID controller with two degree of freedom is proposed recently that it ran improve performance of obeying the reference unconcerned in any disturbance by changing the proportional gain by two degree of freedom parameter. But it has also the defect that parameter a must be changed to obtain the ideal Proportional parameter. On this paper, we design the controller which automatically adjusts parameter u using fuzzy Algorithm to overcome such defects. Also, we compare the proposed method with established one and evaluate them to confirm performance of the designed controller.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.1059-1065
• /
• 2010

Very-early strength latex-modified concrete (VES-LMC) was developed for the purpose of fast-track overlay of a concrete bridge deck under heavy traffic, concentrated on the workability, durability, and strength gain so that it can be opened to the traffic only three hours after its placement. The mixture of VES-LMC might accompany very high heat of hydration at early-age because of its inherent rapid hardening property and could have susceptibility to autogenous shrinkage because of its relatively low water-cement ratio. This study evaluated the effect of the latex-cement ratio(L/C) both of the constant and variable slumps on the autogenous shrinkage of VES-LMC by carrying out simple temperature rise test and early-age shrinkage experiment. Test results are as follows: The latex contributes on the enhancement of the concrete durability but has little effect on its hydration and the accompanied heat of hydration in VES-LMC. Autogenous shrinkage increased with the increase in latex-cement ratio at variable slumps and its pattern followed regularly a logarithmic increase. However, the influence of water-cement ratio and latex-cement ratios for the test specimens at constant slump on early-age autogenous shrinkage property was found to be minor due to the simultaneous effect of the two experimental variables.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.329-329
• /
• 2007

Photoconductive poly crystalline lead oxide coated on amorphous thin film transistor (TFT) arrays is the best candidate for direct digital x-ray detector for medical imaging. Thicker films with lessening density often show lower x-ray induced charge generation and collection becomes less efficient. In this work, we present a new methodology used for the high density deposition of PbO. We investigate the structural properties of the films using X-ray diffraction and electron microscopy experiments. The film coatings of approximately $200\;{\mu}m$ thickness were deposited on $2"{\times}2"$ conductive-coated glass substrates for measurements of dark current and x-ray sensitivity. The lead oxide (PbO) films of $200\;{\mu}m$ thickness were deposited on glass substrates using a wet coating process in room temperature. The influence of post-deposition annealing on the characteristics of the lead oxide films was investigated in detail. X-ray diffraction and scanning electron microscopy, and atomic force microscopy have been employed to obtain information on the morphology and crystallization of the films. Also we measured dark current, x-ray sensitivity and linearity for investigation of the electrical characteristics of films. It was found that the annealing conditions strongly affect the electrical properties of the films. The x-ray induced output charges of films annealed in oxygen gas increases dramatically with increasing annealing temperatures up to $500^{\circ}C$ but then drops for higher temperature anneals. Consequently, the more we increase the annealing temperatures, the better density and film quality of the lead oxide. Analysis of this data suggests that incorporation and decomposition reactions of oxygen can be controlled to change the detection properties of the lead oxide film significantly. Post-deposition thermal annealing is also used for densely film. The PbO films that are grown by new methodology exhibit good morphology of high density structure and provide less than $10\;pA/mm^2$ dark currents as they show saturation in gain (at approximate fields of $4\;V/{\mu}m$). The ability to operate at low voltage gives adequate dark currents for most applications and allows voltage electronics designs.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.2
• /
• pp.75-80
• /
• 1998

Disbudded epicotyl cuttings from light-grown 6-day-old seedings of Vigna angularis Owhi et Ohashi were preincubated in $2\;\times\;10^{-4}M$ IAA solution for 48 hr to promote adventitious root formation in upright or inverted direction and then incubated in upright direction for 96 hr. Adventitious root formation occurred only at the morphological base of the cuttings which were preincubated in upright direction, while at the both ends in inverted direction. IAA treatment enhanced the adventitious root formation in all cuttings regardless of their orientation during preincubation. To elucidate localized root development, the activity of enzymes involved in root initiation and development was measured 24 hr, 48 hr, and 148 hr after epicotyl incubation. IAA oxidase, peroxidase and catalase were assayed in the apical, middle and basal segment of the epicotyls, and their fresh weight and length were measured. Elongation occurred the most in the upper segment of the epicotyl while fresh weight gain was the most in the basal segment. At root initiation phase, 24 hr after incubation IAA peroxidase and catalase activities appeared high at rooting zone while IAA oxidase activity was low at both ends, IAA oxidase and peroxidase activities declined at the rooting zone during the adventitious root formation at 48 ht. Inversion of cuttings during preincubation caused a chrange of enzyme activities along their epicotyl cuttings. Only peroxidase activity showed a high correlation with root initiation. Therefore, the biochemical change is highly correlated with change in IAA level in the rooting zone of the epicotyl, resulting in root formation in unusual rooting zone of epicotyl.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.1
• /
• pp.79-84
• /
• 2011

This study was conducted to investigate the effect of oral administering kefir on blood glucose levels in diabetic mice. Kefir($10\;m\ell/kg$ body weight) was orally administered to diabetic mice twice daily for 45 days. Diabetic mice fed saline or 10% skim milk were used as a control. No significant difference in feed intake and weight gain were observed among the treatments. Compared to the saline-fed or skim milk-fed group, blood glucose in the kefir-fed group decreased significantly at 45 days(p<0.05). At 45 days, serum triglyceride and non-esterified fatty acid concentrations in diabetic mice fed kefir decreased significantly compared to those of the saline and skim milk groups(p<0.05). Both high density lipoprotein and low density lipoprotein concentrations were not significantly different among the three treatment groups. In conclusion, the symptoms of diabetic mice improved when kefir was fed for >45 days.

• Korean Journal of Family Social Work
• /
• no.55
• /
• pp.129-156
• /
• 2017

The study was conducted to identify factors that affect the first childbearing decisions among married working women in South Korea and thereby to gain insight into effective ways to improve relatively low fertility and unfavorable workplace conditions for women of childbearing age. This study used the merged data(1st-5th waves) from Korean Longitudinal Survey of Women and Families (KLoWF), which were measured by the Korean Women's Development Institute. With 1,020 married business women, cross tab and binary logistic regression were conducted to determine which factors were significantly associated with the first childbearing decisions.