• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.665-670
• /
• 2020

Buffer layer in CIGS thin-film solar cells improves energy conversion efficiency through band alignment between the absorption layer and the window layer. ZnS is a non-toxic II-VI compound semiconductor with direct-transition band gaps and n-conductivity as well as with excellent lattice matching for CIGS absorbent layers. In this study, the structural and optical properties of ZnS thin films, deposited by RF magnetron sputtering method and subsequently performed by the rapid thermal annealing treatment, were investigated for the buffer layer. The zincblende cubic structures along (111), (220), and (311) were shown in all specimens. The rapid thermal annealed specimens at the relatively low temperatures were polycrystalline structure with the wurtzite hexagonal structures along (002). Rapid thermal annealing at high temperatures changed the polycrystalline structure to the single crystal of the zincblende cubic structures. Through the chemical analysis, the zincblende cubic structure was obtained in the specimen with the ratio of Zn/S near stoichiometry. ZnS thin film showed the shifted absorption edge towards the lower wavelength as annealing temperature increased, and the mean optical transmittance in the visible light range increased to 80.40% under 500℃ conditions.

• The Korean Journal of Physiology
• /
• v.5 no.1
• /
• pp.59-69
• /
• 1971

Studies were undertaken on the changes in the renal blood flow by relating them with the alterations in the amplitudes in the rheogram of rabbits. The changing pattern of the electrical conductivity was recorded by means of the needle electrodes inserted into the kidney and the surrounding aluminium foil which was grounded. The Impedance Rheograph manufactured by the Narco Company was used. The small artifact which persisted after ligation of the renal vessels was subtracted from the value obtained in each pulsatile wave in the rheogram. The animals were nembutalized intravenously, 30 mg/kg. A plastic canule was inserted into the carotid artery and the arterial blood pressure was monitored continuously with the pressure transducer connected to the physiograph. Stepwise bleedings were performed on the animal. The first bleeding was between 13 to 18 ml in the amount, and it was folowed by consecutive hemorrhages, 5 or 10 ml each time. The total amount of bleeding was summed as much as 1.5-2% of the body weight. Two minutes fter each bleeding th arterial blood pressure, ECG and the rheogram were taken. That was the necessary time to obtain the stabilized picture of each parameter. After closing the bleeding process, the shed blood was retransfused into the animal and the response in the renal blood flow was observed as well as the arterial blood pressure. Particularly the presence or absence of the autoregulatory mechanism in the situation of the hemorrhage was also studied. The results obtained were as follows: 1. In 7 cases out of 22, that was about one third of the total number of experiments, the autoregulatory mechanism of the renal blood flow persisted even in acute hemorrhage, and the decreases in the renal blood flow were less than 10% of the control values even when the arterial blood pressure dropped to 66-87% of the original value obtained before the bleeding. 2. Because of the stepwise bleeding the exact blood pressure at which the renal blood flow reduced as much as one third of the control value could not be obtained. However, the results revealed that the approximate pressure, expressed as percentage of the control value, was 50-60% in 3 cases, 61-70% in 4 cases and 71-80% in 8 cases. In one case the decrease in the renal blood flow exceeded one third of the control value before the pressure dropped to 80% of the control. 3. In 19 cases the decreases in the renal blood flow exceeded one half of the control values by hemorrhage. Then the arterial blood pressure revealed less than 40% of the control value in 6-cases. In 2 cases the pressure was 51-60% of the control pressure. In 5 cases the range of bleed pressure was 61-70%, and in e remaining 6 cases the pressure ranged from 71 to 80% of e control value. 4. Out of 15 cases of retransfusion after definite decreases in the renal blood flow loller·ing the hemorrhage, 9 cases restored their renal blood flow. On the contrary 6 cases showed low values even when the shed blood was retransfused. 5. Theories concerning the mechanism of the autoregulation of the renal blood flow were reviewed for the purpose of explanation of the results obtained. However, there are much to be done before greater satisfaction

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.2
• /
• pp.82-88
• /
• 2017

MET (Microbial Electrochemical Technology), such as MFC (Microbial Fuel Cell) and MEC (Microbial Electrolysis Cell), is a promising technology for producing sustainable biogas from an anaerobic digester (AD). At current stage, however, the most likely limiting factors, large internal resistances, should be overcome for successful scale up of this technology. Various researchers reported that application of electrode materials containing high current density, increase of ion strength and conductivity, configuration of electrode are good methods for minimizing internal resistances. Recently, stainless steel is receiving great attention because of not only high performance and durability but also low cost. Therefore, in this study, we evaluate electrochemical characteristics and biogas production rate using various electrode materials and configuration (graphite carbon coated with catalysts ($GC-C_M$) or not (GC), stainless steel mesh (SUS-M) and plate (SUS-P)). As the results, current densities of $GC-C_M$, GC, SUS-P, SUS-M were 2.03, 1.36, 1.04, $1.13A/m^2$, respectively. Methane yields of $GC-C_M$, GC, SUS-P, SUS-M were 0.27, 0.14, 0.19, 0.21 $L-CH_4/g-COD_{rem}$., respectively. Stainless steel shows high current density and methane yield, which are similar as graphite carbon coated with catalysts.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.2
• /
• pp.7-15
• /
• 2014

This study was conducted to understand the chemical characteristics of groundwater in carbonate areas of Korea. In this study, data on pH, electric conductivity (EC), $Ca^{2+}$, $Mg^{2+}$, $Na^+$, $K^+$, $Cl^-$, $SO_4{^{2-}}$, and $HCO_3{^-}$ were collected from 97 wells which were installed in various carbonate rock regions of Korea. The pH values ranged from 5.7 to 9.9, and the average value was 7.3. The concentration range showed differences between the maximum value of $HCO_3{^-}$ and the medium to minimum values of $Ca^{2+}$, $Mg^{2+}$, $Na^+$, $Cl^-$, $SO_4{^{2-}}$, and $K^+$ in the study area. The average value of EC was $374{\mu}S/cm$, higher than in granite and gneiss areas, where the value is $176{\mu}S/cm$. Most of the groundwater was type $Ca-HCO_3$, and some was type $Mg-HCO_3$. The relationship between $Ca^{2+}$, $Cl^-$, and $HCO_3{^-}$, respectively, and EC showed relatively significant positive correlations compared to the other dissolved components. However, the determination coefficients for $Mg^{2+}$, $Na^+$, $SO_4{^{2-}}$, and $K^+$ were very low less than 0.2. These results indicate that the source of $Ca^{2+}$ and $Mg^{2+}$ is relatively simple (carbonate dissolution) compared to other sources. The sources of $Na^+$, $K^+$, $Cl^-$, $SO_4{^{2-}}$, and $HCO_3{^-}$ might be not only water-rock interactions, but also irrigation return flow, because many groundwater wells had been developed for irrigation purposes. Subsequently, the influence of agriculture on groundwater chemistry was evaluated using a cumulative plot of $SO_4{^{2-}}$. The threshold value of $SO_4{^{2-}}$ calculated from the cumulative frequency curve was 29.2 mg/L. Therefore, 12.4% of all the groundwater wells were affected by agricultural activity.

• Journal of agriculture & life science
• /
• v.45 no.5
• /
• pp.17-23
• /
• 2011

Growth characteristics and adaptability of 10 poplar clones planted at a reclaimed tidal flat were evaluated. The contents of $Na^+$, $Ca^{2+}$ and $Mg^{2+}$ were 10.0, 3.4 and 1.5 times higher, respectively than those of control although the electrical conductivity(EC) in the soil at the test plantation was low as much as 0.51 dS/m. The contents of organic matter(OM) and total nitrogen(TN) in the soil were 22.9 and 23.0 times lower than those of control. Average survival rate of 10 poplar clones showed 88% at three years after planting. Clones Eco28(Populus euramericana), Dorskamp(Populus deltoides ${\times}$ P. nigra) and I-476(Populus euramericana) showed the best survival rate of 100%. However, clones 97-19(Populus deltoides(Lux) ${\times}$ P. deltoides(Harvard)) and Suwon (Populus koreana ${\times}$ P. nigra var. italica) were relatively lower than other clones. Average height and DBH of all clones were 4.8 m and 3.6 cm, respectively. Clone Dorskamp showed the greatest height and DBH, 5.9 m and 5.0 cm, respectively. Clones 97-19 and Dorskamp showed the least defoliation by stress and visible damage by insects and diseases, whereas clones Suwon and I-476 were the most sensitive at the reclaimed tidal flat. Clone Dorskamp showed the best adaptability at the reclaimed tidal flat, but clone Suwon showed the worst based on survival rate, growth, and visible damages.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.1024-1034
• /
• 2010

In order to select the demonstration farm site for agricultural investment by Korean fund, 14 sites were investigated by soil morphological characteristics and were evaluated by rating method in the Oudomxai province of Laos. Land evaluation was carried out by using eight factors, such as site accessibility, soil erosion susceptibility, easiness of farm mechanization, irrigation water obtainability, suitability of soil physical and chemical properties for crop growth, cost for establishment of farm foundation and land obtainability. In addition, one site to have been highly ranked was soil physico-chemically studied for farm planning. The site of heavy clayey soil has hydraulic conductivity of 26.27~40.64 cm $day^{-1}$, organic content of lower than 14 g $kg^{-1}$, available phosphate content of lower than 3 mg $kg^{-1}$, exchangeable cations of lower than 0.38, 11 and 3.1 cmolc $kg^{-1}$ in K, Ca and Mg, respectively. Major important limitations for establishment of demonstration farm were concluded as heavy soil-texture, high soil erodibility, low organic matter and phosphate contents, and insufficient irrigation water in the Oudomxai province of Laos.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.690-694
• /
• 2021

Carbon spheres (CS) were fabricated using glucose as a precursor in the hydrothermal method. Hollow TiO₂ (H-TiO₂) spheres with 200 nm, 500 nm, and 1,200 nm were synthesized by CS/TiO₂ core-shell particles via a sol-gel and calcination method. H-TiO₂ spheres with nano and micron sizes were characterized using FE-SEM, HR-TEM, and X-ray diffraction. The CIE color coordinate, solar reflectance, and heat shield temperatures of H-TiO₂/polyacrylate (PA) composite film were investigated using a UV-Vis-NIR spectrometer and homemade heat insulation temperature measuring device. H-TiO₂/PA composites exhibit excellent thermal insulation since the hollow structure filled with dry air has low thermal conductivity and near infrared light reflecting performance. The thermal insulation increased with increasing the hollow sphere (HS) size on H-TiO₂/PA composites. The PA composite film mixed with H-TiO₂ filled with 1200 nm HS reduced the heat shield temperature by 26 ℃ compared to that of the transparent glass counterpart.

• Economic and Environmental Geology
• /
• v.51 no.6
• /
• pp.553-566
• /
• 2018

The occurrence of natural radionuclides like uranium and radon in groundwater was hydrochemically examined based on 40 well groundwaters in Mungyeong area. The range of electrical conductivity (EC) value in the study area was $68{\sim}574{\mu}S/cm$. In addition to the increase of EC value, the content of cations and anions also tends to increase. Uranium concentrations ranged from $0.03{\sim}169{\mu}g/L$ (median value, $0.82{\mu}g/L$) and radon concentrations ranged from 70~30,700 pCi/L (median value, 955 pCi/L). Only 1 out of 40 wells (2.5%) showed uranium concentration exceeding the maximum contaminant level (MCL; $30{\mu}g/L$) proposed by the US Environmental Protection Agency (EPA). Radon concentrations of eight wells (20%) exceeded AMCL(Alternative maximum contaminant level) of the US EPA (4,000 pCi/L). Four out of those eight wells even exceeded Finland's guideline level (8,100 pCi/L). When concentrations of uranium and radon were investigated in terms of geology, the highest values are generally associated with granite. The uranium and radon levels observed in this study are low in comparison to those of other countries with similar geological settings. It is likely that the measured value was lower than the actual content due to the inflow of shallow groundwater by the lack of casing and grouting.

• Korean Journal of Ecology and Environment
• /
• v.52 no.2
• /
• pp.136-142
• /
• 2019

Water spider(Argyroneta aquatica) inhabits only a small size wetland in Eundae-ri, Yeoncheon-gun. In this study to investigate environmental factors influencing on population of A. aquatica, we analyzed the relationship between density of A. aquatica and various physicochemical and biological factors. Density of A. aquatica increased with small habitat area and high $NH_4$ and electric conductivity. The relationship between density of A. aquatica and prey or predator was low but the water spider decreased with density of Pomacea canaliculata. And density of A. aquatica was not related to the coverage of emergent plant. However density of A. aquatica decreased as the increase of floating plant and increased as the increase of submerged plant. These results indicated that aquatic plants are important in the habitat environment of A. aquatica. Therefore we suggest necessity of management strategies for the invasive species, P. canaliculata which is a notorious predator of aquatic plants.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.2
• /
• pp.61-70
• /
• 2019

Geopolymer is an eco-friendly construction material that has various advantages such as reduced $CO_2$ emission, fire resistance and low thermal conductivity compared to cement. However, it has not been many studies on the thermal behavior of the surface of the geopolymer panel when flame is applied to the surface. In this study, surface characteristics of hardened geopolymer on flame exposure was investigated to observe its characteristics as heat-resistant architectural materials. External structure changes and crack due to the heat shock were not observed during the exposure on flame. According to the residue of calcite and halo pattern of aluminosilicate gel, decarboxylation and dehydration were extremely limited to the surface and, therefore, it is thought that durability of hardened geopolymer was sustained. Gehlenite and calcium silicate portion was inversely proportional to quartz and calcite and significantly directly proportional to BFS replacement ratio. Microstructure changes due to the thermal shock caused decarboxylation and dehydration of crystallization and it was developed the pore and new crystalline phase like calcium silicate and gehlenite. It is thought that those crystalline phase worked as a densification and strengthening mechanism on geopolymer panel surface.