The purpose of this study to grasp the effects of the stress coping method on the periodontal disease in order to provide raw data for the studies on the development of the training for effective stress copying method resulting in improvement in prevention, occurrence, and progression of periodontal disease. Data were collected from total of 326 subjects in their forties and fifties, during the period from March to October 2011. Using questionnaire and examination of periodontal health, and were analyzed using frequency, t-test, multivariate analysis of variance, multiple regression by SPSS ver. 19.0 (IBM Co., USA). The higher emotion-focused stress coping ($\beta$=0.341), the higher the gingival index, the higher the emotion-focused stress coping ($\beta$=0.239) the deeper the pocket depth, the higher the emotion-focused stress coping ($\beta$=0.158) the higher clinical attachment loss, showed statistically significant positive association. This study suggests that the dental clinic institute needs to implement education program including stress management and coping method improvement in order to prevent periodontal disease and make the occurrence and progression to be managed by professionals.
Journal of the Institute of Electronics Engineers of Korea SD
/
v.40
no.8
/
pp.565-571
/
2003
We prepare the PVDF thin film using vacuum deposition method with the application of voltage and obtain the optimum deposition condition for $\beta$-PVDF thin film on the basis of the results of FT-IR, crystallinity of $\beta$ phase, surface roughness studies with varying the condition. The phase of PVDF thin film is analyzed by the FT-IR spectrum. When the substrate temperature and applied voltage increase from 3$0^{\circ}C$ to 9$0^{\circ}C$ and from 0kV to 9kV, respectively, the crystallinity of $\beta$ phase is introduced as large as 64%. It means that the substrate temperature and applied voltage allow the phase transition of $\beta$ phase to occur more easily. Also, the surface roughness of PVDF thin film decreases from 65.1nm to 36.6nm with the increase of substrate temperature. In results, we obtain the optimum deposition conditions for $\beta$-PVDF thin film from these experimental results and measure the Properties of the $\beta$-PVDF film deposited in the optimum condition. The dielectric properties such as dielectric constant and loss tangent decrease from 2.34 to 0.44 and from 0.27 to 0.04 with the increase of frequency, respectively.
Seo, Jung-Yoon;Lee, Wook-Jae;Lee, Jong-cheol;Shin, Mee-Ran;Kim, Yun-Sang;Pi, Sung-Hee;Shin, Hyung-Shik;You, Hyung-Keun
Journal of Periodontal and Implant Science
/
v.37
no.2
/
pp.223-236
/
2007
This study was attempted to evaluate home-manufactured implants by placing $Stage-1^{(R)}$ Implant (Lifecore, Co., USA) whose surface is treated with REM that has already been varified clinically,$Chaorum^{(R)}$ Implant(Chaorum Co., Korea) whose surface treatment is same as that of Stage-1 Implant and $Atlas^{(R)}$ Implant(Cewellmedi Co., Korea) whose surface is treated with anodic oxidation immediately after the teeth of experimental animals were extracted to compare histological findings among them. Stage-l Implant(diameter: 3.5mm, length: IOmm), Chaorum Implant(diameter: 3.3mm, length: 8.5mm) and Cowell medi Implant(diameter: 4.0mm, length: 8.0mm) were placed into the mandible premolars of 2 adult beagle dogs immediately after their teeth were extracted, and then histological findings were analyzed at 6 weeks. After those implants were inserted directly after their teeth were extracted, the results of periotest were recorded, radiography was done, the subjects went through thorough control for 6 weeks, and then comparison among periotest, radiography and histological finding was made. After comparison of those findings, the values of periotest were satisfactory and bone healing was relatively satisfactory on radiography at 6 weeks. For osseointegration with the bone tissue, Stage-1 was 45.3%, Chaorum 55.3%, and Cowellmedi 52.5%, which was a satisfactory result. Although implant surgery immediately after teeth were extracted involves difficulties among recent implant surgeries, it is being frequently used in that it may reduce surgery hours, the frequency of surgery, and bone loss for patients. This experiment was conducted to evaluate the technological levels of home-manufactured implants that have been remarkably developed in recent years and in conclusion, those implants showed nearly similar result.
A Clinical and bacteriologcal observation was performed 128 cases of chronic otitis media who had taken middle ear surgery at Dept. of otolaryngology of St. Benedict Hospital during the period of Feb. 1981 to Feb. 1983. The following results were obtained. 1) Among total 128 cases, male were 60 cases (46.9%) and female were 68 cases (53.1 %) and age distribution showed 48 cases (37.5 %) in 3rd decade, 37 cases (28.9 %) in 2nd decade and 27 cases (21.1 %) in 4th decade. 2) Site distribution were 71 cases (55.5%) in right, 57 cases (44.5 %) in left. 3) Degree of preoperative hearing loss were 64 cases (50%) in moderate, 32 cases (25% ) in mild, 27 cases (21.1 %) in severe and 5 cases (3.9%) were normal. 4) Central perforation were observed in 65 cases (50.8 %), total perforation in 44 cases (34.4 %), attic perforation in 12 cases (9.4 %) and marginal perforation in 7 cases (5.4 %). 5) Pathologic changes of middle ear and mastoid antrum showed granulation in 81 cases (63.3 %), cholesteatoma in 47 cases (36.7%). 6) The route of approach were 123 cases (96.1%) in postauricular, 3 cases (2.3%) in transmeatal and 2 cases (1.6 %) in endaural. 7) Type of operation were 53 cases (41.4 %) in intact canal wall tympanoplasty with mastoidectomy, 42 cases (32.8 %) in tympanoplasty without mastoidectomy, 23 cases (18%) in modified radical mastoidectomy and 10 cases (7.8%) in radical mastoidectomy. 8) Type of anesthesia were 95 cases (74.2 %) by local anesthesia, 33 cases (25.8 %) were by general anesthesia. 9) Among 93 specimens of culture, proteus (31.2%), staphylococcus (28.7%), pseudomonas (23.7 %), streptococcus (7.5 %) and etc. (8.7%) in order of frequency.
Adverse drug reactions (ADR) caused by inappropriate prescription are responsible for major socioeconomic loss. Drug-drug interactions (DDI) has been recognized as a major part of ADRs and, therefore, healthcare professionals should prevent possible DDIs to minimize preventable ADRs. This study aimed to examine DDI information in drug information references and Korea Food & Drug Administration (KFDA) drug labeling information. Drug ingredients from the formulary of Health Insurance Review and Assessment Service in Korea (HIRA) were included for the study. DDI information source used for the study were Micromedex Drugdex and Drug Information Facts (DIF) with the DDI severity level of "moderate" or more. The DDI information in KFDA drug labeling were collected and compared. Drug ingredients were classified with KFDA Drug Classification and ATC Classification of WHO for the analysis. Among the total 1,355 drug ingredients satisfying inclusion criteria, 738 ingredients involved at least one DDI, which was described in Micromedex and/or DIF. Drug Ingredients of 176 involved DDI only described in KFDA drug labeling, but not Micromedex nor DIF. Drug ingredients of 35 which DDIs were described in Micromedex or DIF did not have DDI based on KFDA drug labeling. Micromedex and DIF retrieved 7,582 and 3,071 DDIs, respectively 57.6% and 58.5% of DDIs were also described in KFDA drug labeling. Central nervous system (CNS) drugs, cardiovascular system (CVS) drugs and the antiinfectives appeared to have higher frequency of DDIs among all drug classes. The highest number of DDIs with high severity level ("contraindicated" or "major") were the DDIs of CNS drugs. The antiinfectives are the second drug group having serious DDIs. The DDI pairs of the CNS drug and the antiinfective had the highest contraindication risk (13.6%). DDI information from Micromedex and DIF were not consistent with the result that only 465 ingredients' DDIs are common in both literature (total DDI numbers were 715 vs 488, respectively). And 1,652 DDI information are common in both references among 7,582 vs 3,071 DDIs, respectively. Only 55.2% of DDI information in the database contained in the KFDA drug labeling. Prescribers and pharmacists should pay attention to the drugs for CV system, CNS and infections because of higher risk of possible DDIs compared to other drug classes. KFDA drug labeling is not likely to be recommended as a good information source for DDI due to significant inconsistency of information. Drug information providers should be aware that DDI information from different sources are not consistent and therefore multiple references should be used.
In this paper, we propose a method for generating improved saliency map by learning multiple features to improve the accuracy and reliability of saliency map which has similar result to human visual perception type. In order to overcome the inaccurate result of reverse selection or partial loss in color based salient area estimation in existing salience map generation, the proposed method generates multi feature data based on learning. The features to be considered in the image are analyzed through the process of distinguishing the color pattern and the region having the specificity in the original image, and the learning data is composed by the combination of the similar protrusion area definition and the specificity area using the LAB color space based color analysis. After combining the training data with the extrinsic information obtained from low level features such as frequency, color, and focus information, we reconstructed the final saliency map to minimize the inaccurate saliency area. For the experiment, we compared the ground truth image with the experimental results and obtained the precision-recall value.
Journal of the Korean Institute of Electrical and Electronic Material Engineers
/
v.17
no.11
/
pp.1178-1185
/
2004
In the atmosphere of $N_2$ gas, BaZ $r_{0.08}$$Ti_{0.92}$$O_3$ polycrystal was grown by floating zone technique using BaZ $r_{0.08}$$Ti_{0.92}$$O_3$ ceramics as a feed and SrTi $O_3$(1l0) single cystal as a seed. The dielectric constant and loss at 10 kHz, 100 kHz, and 1 MHz for the as-grown sample were measured as a function of temperature in the temperature range between -10$0^{\circ}C$ and 150 $^{\circ}C$ to find a dielectric peak with frequency dispersion at Curie point. The hysteresis loop showed that the grown sample had very small polarization which was 0-0.01 $\mu$C/$\textrm{cm}^2$ for the applied dc-electric fields from -7 kV/cm to +7 kV/cm. However, the normal hysteresis loop was appeared after oxygen annealing. The electric-field dependence of the dielectric constant for both the as-grown and the post-annealed samples was studied by measuring the dielectric constants as a function of the biased-electric fields and their tunability was figured out from it at room temperature(27 $^{\circ}C$) and cryotemperature( -73$^{\circ}C$). Tunability for the as-grown sample was 51 % and the figure of merit 20.4 at 10kHz with the biased electric-field of 12 kV/cm. The tunability for the grown sample may be increased up to 80 % if the electric field of 25 kV/cm is applied. Tunability for the post-annealed sample was 41 % and the figure of merit 10.3 at 10 kHz with the biased electric-field of 12 kV /cm. Post-annealing improved the crystallinity of the as-grown sample but decreased its tunability.ability.
The Journal of Korean Institute of Electromagnetic Engineering and Science
/
v.25
no.10
/
pp.1040-1049
/
2014
In this paper, a quad-band antenna for DCS1800, PCS1900, WCDMA, WLAN and Mobile WiMAX application is proposed. The proposed antenna is a printed monopole structure, and consists of two rectangular ring-shaped radiating patches on the front side and two different size of L-shaped slots on the back side(ground plane). Two rectangular ring radiation patches are respectively resonant at 2 GHz and 3.5 GHz bands, and additional resonance is occurred at 5.3 GHz by the coupling effect between two ring patches. In addition, the optimized matching characteristic is obtained by controlling the gaps. Also, by adding two L-slots on the ground plane, additional resonant frequency band of 5.6 GHz is occurred. Finally the measured bandwidths of the proposed antenna below -10 dB return loss are 1,200 MHz(1.6~2.8 GHz), 800 MHz(3.2~4.0 GHz), 300 MHz(5.14~5.44 GHz), and 690 MHz(5.56~6.25 GHz). The radiation patterns have the omni-directional characteristic, and the measured antenna average gains at resonant bands are 0.86~4.07 dBi.
The Journal of Korean Institute of Electromagnetic Engineering and Science
/
v.27
no.10
/
pp.883-891
/
2016
In this paper, we propose an asymmetric dipole antenna utilizing the metal case as a ground radiator for a pen-type wireless presenter which operates in the ISM frequency band(2.4~2.48 GHz). A normal mode helix mounted on the top end of the long metallic cylinder case which acts as the ground plane takes the form of the asymmetric dipole structure in the proposed antenna. The metallic cylinder case which performs as a radiating element increases the inherent narrow bandwidth and low gain of the helix. The effects of the hand contacts with the metal case on the antenna performance are measured and analyzed with a specially designed human phantom. Experimental results show that the -10 dB return loss bandwidth of the proposed antenna in free space(no hand contact) is 200 MHz that ranges from 2.3 to 2.5 GHz and the maximum gain is measured to be 5 dBi. Under the normal operating condition where the metal case is contacted with a human hand, the bandwidth is 480 MHz from 2.24 to 2.72 GHz. The maximum gain is 2 dBi, lowered by 3 dB due to the hand contact.
The Journal of the Korea institute of electronic communication sciences
/
v.8
no.7
/
pp.1017-1023
/
2013
Datacommunications transmit the source codes that are coded in information devices, such as computer to the transmission line by means of the line coded signal. AMI method is applied to the line coding method to transmit the signal for long distance. The disadvantage of the AMI method is to loss the bit synchronization when consecutive binary bit '0' over 4ea is coming into line coder. The scrambling technique is used to overcome the problem. The HDB-3 scrambling method is used in Korea standard which standard in ITU-T. When the HDB-3 technology is used. the method should convert the consecutive bit '0' over 4ea to certain bits format. As a result, when there are many such kind of '0' bit stream in source codes, data transmission efficiency will be decreased to treat in line coder, etc. This paper is directed to study the Roman character code system in $KS{\times}1001$, Korea standard for information exchange code in datacommunication systems. Based on the study result, this paper proposed the maximum optimized Roman character code system. In the study, Character coding rule for $4{\times}4$bits and the statistical data for roman character using frequency were considered to simulate. The paper shows the result that when the proposed new roman character coding system is applied to use, the data transmission efficiency could be increased to about 134% compared to existing code system.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.