• 대한토목학회논문집
• /
• 제28권4A호
• /
• pp.581-590
• /
• 2008

프리캐스트 패널은 교량바닥판의 합성 구조부재로서 사용된다. 프리캐스트 패널의 횡방향 철근은 교량바닥판의 주철근 역할을 하며, 또한 패널 상부의 현장타설 콘크리트 시공시 거푸집 대용으로도 적용된다. 이 논문에서 3가지 이음부 형상을 적용한 합성보 시험체에 대해서 정적실험을 수행하여 강도 및 균열폭을 검토하였다. 실험결과, 루프이음을 적용한 반단면 프리캐스트 부재의 연속성이 우수함을 확인하였고, 루프이음의 겹이음 길이와 횡방향 보강철근의 영향도 검토하였다. 루프이음의 겹이음 길이가 증가할수록 루프이음 반단면 프리캐스트 부재의 휨강도가 증가하였다. 또한, 루프이음부에 횡방향 보강철근은 균열제어에 매우 효율적임을 확인하였다.

• The International Journal of Costume Culture
• /
• 제7권2호
• /
• pp.77-86
• /
• 2004

The purpose of this study is to characterize physical and tensile properties according to a knitting method as basic materials for solving the difficulties that occur due to the fact that the crosswise elongation is most different among knit stitch at the time of measuring elongation of knitwear. The sample used for this study was wool $100\%$ and was knitted into two, that is, controlled loop length controlled to properties of structure and fixed loop length by using Shimaseiki SES-124S 12G computer automatic flat knitting machine with DSCS device. Also, the density of rib fabric was 12gauge and its quantity was a total of seven of $0{\times}0,\;1{\times}1,\;2{\times}1,\;2{\times}2,\;3{\times}3,\;4{\times}4$ and including plain fabric, and knitted 2 pieces of sample of 300 wale${\times}400$ course. In conclusion, rib stitch has the much higher stretch rate in the direction of the course than other stitches.

• 한국지열·수열에너지학회논문집
• /
• 제7권2호
• /
• pp.10-15
• /
• 2011

A ground loop heat exchanger for the ground source heat pump system is the core equipment determining the thermal performance and initial cost of the system The length and performance of the heat exchanger is dependent on the ground thermal conductivity, the operation hours, the ground loop diameter, the grout, the ground loop arrangement, the pipe placement and the design temperature. The result of this simulation shows that higher thermal conductivity of grouting materials leads to the decrease length of geothermal heat exchanger from 100.0 to 84.4%.

• 한국항만학회지
• /
• 제11권2호
• /
• pp.145-156
• /
• 1997

The purpose in this study is development of model for the Container Terminals of Pusan Port, First of all, Quantitive and Qualititve factors are characterized which effects on Physical Distribution System in Container Terminals. The System Dynamics method is used to develope the model by using these factor. This model is able to present the timinig of investment in Container Terminals of Pusan Port. Six models are showed by change of parameters in System Dynamics, in this paper. In the model, Five feedback loop were found. Loop 1 : Number of Liners$\rightarrow$Number of Congested ships$\rightarrow$Port's Charges$\rightarrow$Export & Import Cargo Volumes$\rightarrow$Number of Liners$\rightarrow$The will to investment of government$\rightarrow$Length of berth→Number of Liners. Negative loop was acquired. Loop 2 : Port's Charge$\rightarrow$Economic of Port$\rightarrow$The will to Private management$\rightarrow$Efficiency for Port's Operation$\rightarrow$Port's Charges. Positive loop was acquired. Loop 3 : Number of Congested ships$\rightarrow$Planning for future development$\rightarrow$Information Service$\rightarrow$Support service for port's user$\rightarrow$Number of Congested ships. Negative loop was acquired. Loop 4 : Number of Congested ships$\rightarrow$Planning for future development$\rightarrow$Extent of stacking area$\rightarrow$Number of handling equipmint$\rightarrow$Number of Congested ships. Negative loop was acquired. Loop 5 : Export & Import Cargo Volumes$\rightarrow$Number of Liners$\rightarrow$Econmic of Port$\rightarrow$Support service for port's user$\rightarrow$Export & Import Cargo Volumes. Positive loop was acquired. System's level variables were selected as followings ; Number of Liners, Number of Congested ships, Export & Import Carge Volumes, Length of berth, and Port's Charges. As result of simmulation of model, fluctuation of respective year was found in level variables. This fluctuation can be used properly to present timing of investment.

• 한국지열·수열에너지학회논문집
• /
• 제9권4호
• /
• pp.9-14
• /
• 2013

A ground loop heat exchanger for the ground source heat pump system is the important equipment determining the thermal performance and initial cost of the system. The length and performance of the underground heat exchanger is dependent on ground thermal conductivity, operation hours, ground loop diameter, grout, ground loop arrangement, pipe placement and design temperature. In this study we find out heat exchanger length with various design factor.

• 한국광학회지
• /
• 제12권6호
• /
• pp.507-510
• /
• 2001

간단한 비선형 증폭 루프에서의 평균 솔리톤 전송의 안정성을 비선형 Schroedinger방정식에 기초한 수치해석법을 이용하여 솔리톤 주기에 대한 증폭 주기의 비율과 루프에서의 erbium doped광섬유의 길이 비율을 변화시켜가며 계산하고 그 결과를 분석하였다. 계산 결과 루프에서의 erbium doped광섬유의 길이 비율이 작을 경우 증폭 주기가 솔리톤 주기에 비해 많이 작아야 한다는 기존의 평균 솔리톤 형성 조건이 완화됨을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3597-3611
• /
• 2021

The present paper studies the thermal-hydraulic behaviour of the rectangular supercritical natural circulation loop (SCNCL) using numerical model of one dimensional. Then the results of this model is confirmed with experimental and benchmark results. Variations with several geometric parameters like loop diameter, riser length, and heater length and operating conditions like heater inlet enthalpy, pressure, friction factor, and inlet and exit loss coefficient on steady-state performance are investigated for various orientations like HHHC, HHVC, VHVC and VHHC of the heater and cooler. The chances of existing static instability (Ledinegg excursion) has been investigated, which reveals that it can arise only in a low inlet enthalpy condition, far from the suggested various orientations of heater and cooler.

• 대한전자공학회논문지
• /
• 제20권4호
• /
• pp.10-15
• /
• 1983

본 논문에서는 전송 속도가 9600 bps인 data modem의 복조기와 equalizer의 효과적인 구성에 대하여 연구하였으며, finite word length 효과가 equalizer 동작에 미치는 영향을 제시하였다. 복조기에는 tap수가 37개인 decimation filter를 사용해서 symbol당 곱셈 횟수를 크게 줄였는데 이때 equalizer 동작에 있어 충분한 결과를 얻을 수 있음을 알 수 있었다. 주파수 offset이 존재할 때 1차 반송파 위상 추적 loop와 2차 반공파 위상 추적 loop의 성능을 비교하였고, word length를 각각 8 bit, 12 bit 및 16bit로 변화시켰을 경우 equalizer 평형상태 MSE(mean square error)의 변화 및 tap 적응을 위한 최적 step see와 lap수를 제시하였다.

• 한국산업융합학회 논문집
• /
• 제3권4호
• /
• pp.337-343
• /
• 2000

Physical properties of matt georgette knitted fabrics, which has been developed recently, were investigated to provide fundamental information for the textile industry. Dimensional characteristics were examined with three different loop lengths, where the plain knitted fabrics were knitted with cotton yam and polyester yarn. The matt georgette plain knitted stitch was fully relaxed after wet relaxation treatment at $130^{\circ}C$ for 30minutes and subsequent tumble dry treatment at $70^{\circ}C$ for 90minutes. As the treatment temperature of wet relaxation became higher and the loop length did shorter, all of stitch density, course density and wale density were increased with 31 of $K_1$ 8.3 of $K_2$ and 3.8 of $K_3$. Also, The higher value of $K_4$ could be obtain with shorter loop length. When the loop length became longer, the $K_4$ value was varied in a wide range with the treatment of wet relaxation and subsequent tumble dry.

• 한국멀티미디어학회논문지
• /
• 제14권3호
• /
• pp.414-422
• /
• 2011

본 연구는 얇은 유전체기판 위에 프린트 패턴으로 구현하는 상/하 대칭 루프안테나에 관한 것으로서, 유전체기판 상/하에 대칭으로 루프안테나용 동박패턴을 제작하여 기판의 상/하에 프린트된 루프패턴 간에서 방사되는 전자계가 서로 충돌하지 않게 방사되는 위상제어형 상/하 대칭 루프안테나에 관한 것이다. 이 방법으로 상/하에 프린트된 각 루프코일이 서로 동위상으로 보완적으로 배치되어 전자계가 원만하게 방사되어, 방사 손실이 없고 방사 효율이 뛰어나게 된다. 앓은 유전체기판의 상/하에 프린트하여 안테나를 구현함으로 연해 경박/소형화가 가능해지며, 이로 인하여 크기 $40mm{\times}6mm$ 이하의 사이즈에, 두께 0.2mm 이하의 박막의 유전체가판에 제 3세대 휴대폰대역인 WCDMA 안테나를 구현하여 액티브 시험에서 평균게인 -3dBi 이상 방사효율 50~70% 정도의 안테나특성이 얻어졌으며, 상용되는 이동형 멀티미디어단말기에 부착하여 액티브 시험결과 평균게인 -4dBi, 송/수신 효율이 43% 얻어졌다.