• Journal of the Korean Solar Energy Society
• /
• v.28 no.4
• /
• pp.43-49
• /
• 2008

The purpose of this study is to present the simulation results and an overview of the performance assessment of a solar heating & cooling system by means of the $200m^2$ evacuated tube solar collector. The simulation was carried out using the thermal simulation code TRNSYS with new model of a single-effect LiBr/$H_{2}O$ absorption chiller developed by this study. The calculation was performed for yearly long-term thermal performance and for two design factors: the solar hot water storage tank and the cold water storage tank. As a result, it was anticipated that the yearly mean system efficiency is 46.7% and the solar fraction for the heating, cooling and hot water supply are about 84.4 %, 41.7% and 72.4%, respectively.

• The Journal of Engineering Geology
• /
• v.9 no.1
• /
• pp.1-15
• /
• 1999

An artificial recharge test was performed to analyze the source of seepage observed inside the Songsanri tombs Kongju during the rainy season. In order to simulate simulate the test, a two-dimensional unsaturated groundwater flow model was developed. By the measured water level variation in the observation wells and in the artificail water tank, the model was cailbrated to estimate the model parameters such as fitting parameters in the constitutive relations(n and $\alpha$), the saturated volumetric water content, the residual volumetric water content, and the saturated hydraulic conductivity. Using the calibrated parameters, the recharge test was simulated. The results of the test and simulation show that the major source of the seepage is the downward groundwater flow through cracks in the protection layer the tombs. It was also analyzed by the steady state simulation that, with a perfect protection layer, a long-term precipitation that, with a perfect protection layer, a long-term precitation could cause only 10% increase of the effective saturation around the north side of the Muryong royal tomb by infiltration of the unsaturated groundwater from the North. Therefore, it is concluded that the most urgent protection plan for the tombs with respect to seepage is to reconstruct an effective waterproof-layer rather than a trenched drainage system.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.1
• /
• pp.61-69
• /
• 2004

A long-term growth simulation was performed at 99 land units in Yeoncheon county to test the potential adaptability of each land unit for growing soybean cultivars. The land units for soybean cultivation(CZU), each represented by a geographically referenced land patch, were selected based on land use, soil characteristics, and minimum arable land area. Monthly climatic normals for daily maximum and minimum temperature, precipitation, number of rain days and solar radiation were extracted for each CZU from digital climate models(DCM). The DCM grid cells falling within a same CZU were aggregated to make spatially explicit climatic normals relevant to the CZU. A daily weather dataset for 30 years was randomly generated from the monthly climatic normals of each CZU. Growth and development parameters of CROPGRO-soybean model suitable for 2 domestic soybean cultivars were derived from long-term field observations. Three foreign cultivars with well established parameters were also added to this study, representing maturity groups 3, 4, and 5. Each treatment was simulated with the randomly generated 30 years' daily weather data(from planting to physiological maturity) for 99 land units in Yeoncheon to simulate the growth and yield responses to the inter-annual climate variation. The same model was run with input data from the Crop Experiment Station in Suwon to obtain a 30 year normal performance of each cultivar, which was used as a "reference" for evaluation. Results were analyzed with respect to spatial and temporal variation in yield and maturity, and used to evaluate the suitability of each land unit for growing a specific cultivar. A computer program(MAPSOY) was written to help utilize the results in a decision-making procedure for agrotechnology transfer. transfer.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.4
• /
• pp.167-173
• /
• 2007

This study analyzed by simulation using TRNSYS as well as by experiment on the solar district heating system installed for the first time for the district heating system in Bundang. Simulation analysis using TRNSYS focused on the thermal behavior and long-term thermal efficiency of solar system. Experiment carried out for the reliability of simulation system. This solar system where the circuits of two different collectors, flat plate and vacuum tube collector, are connected in series by a collector heat exchanger, and the collection characteristics of each circuit varies. Therefore, these differences must be considered for the system's control. This system uses variable flow rate control in order to obtain always setting temperature of hot water by solar system. Specifically, this is a system that heats returning district heating water (DHW) at approximately $60^{\circ}C$ using a solar collector without a storage tank, up to the setting temperature of approximately $85{\sim}95^{\circ}C$ To realize this, a flat plate collector and a vacuum tube collector are used as separate collector loops. The first heating is performed by a flat plate collector loop and the second by a vacuum tube collector loop. In a gross collector area basis, the mean system efficiency, for 4 years, of a flat plate collector is 33.4% and a vacuum tube collector is 41.2%. The yearly total collection energy is 2,342GJ and really collection energy per unit area ($m^2$) is 1.92GJ and 2.37GJ respectively for the flat plate vacuum tube collector. This result is very important on the share of each collector area in this type of solar district heating system.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.107-116
• /
• 2011

Recently, femtocell has been concerned as one of effective solutions to relieve shadow region and provide high quality services to users in indoor environments. Even though femtocell offers various benefits to cellular operators and users, many technical issues, such as interference coordination, network synchronization, self-configuration, self-optimization, and so on, should be solved to deploy the femtocell in current network. In this paper, we develop a simulator for evaluating performance of long term evolution (LTE) femtocell systems under various interference scenarios. The simulator consists of a main-module and five sub-modules. The main-module connects and manages five sub-modules which have the functionality managing user mobility, packet scheduling, call admission control, traffic generation, and modulation and coding scheme (MCS). To provide user convenience, the simulator adopts graphical user interface (GUI) which can observes simulation results in real time. We expect that this simulator can contribute to developing effective femtocell systems by supporting a tool for analyzing the effect of interference between macrocell and femtocell.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.11-20
• /
• 2016

In this paper, we propose the channel estimation scheme for Long Term Evolution-Advanced (LTE-A) downlink system. The proposed scheme uses the fast fourier transform (FFT) interpolation scheme for the user moving at a high speed. The FFT interpolation scheme converts the channel frequency response obtained from least square (LS) or minimum mean square error (MMSE) channel estimation scheme to time domain channel impulse response by taking the inverse FFT (IFFT). After windowing the channel response in the time domain, we can obtain the channel frequency response by taking the FFT. We perform the system level simulation based on 20MHz bandwidth of 3GPP LTE-A downlink system. Simulation results show that the proposed channel estimation scheme can improve signal-to-noise-plus-interference ratio (SINR), throughput, and spectral efficiency of conventional system.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.3
• /
• pp.137-145
• /
• 2004

Long-term wave distribution at Jeju sea is investigated by a numerical simulation based on the thirdgeneration wave model SWAN (Simulating WAves Nearshore). The Jeju sea which retains relatively high wave energy density among Korean coastal regions is considered to be a suitable site for wave power generation and the efficiency of wave power generation is closely related to local wave characteristics. The monthly mean of a large-scale long-term wave data from 1979 to 2002, which is provided by Korea Ocean Research & Development Institute. is used as the boundary condition of SWAN model simulation with 1km grid. An analysis of wave distribution concentrates on the seasonal variation and spatial distribution of significant wave heights, mean wave directions and mean wave periods. Significant wave heights are higher in winter and summer and the west sea of Jeju appears relatively higher than east's. The highest significant wave height occurs at the northeast sea in winter and the second highest significant wave height appears at the southeast sea in summer, while the significant wave heights in spring and autumn are relatively low but homogeneous. The distribution of wave directions reveals that except the rear region influenced by wave refraction, the northwest wave direction is dominant in summer and the southeast in winter. Wave periods are longer in summer and winter and the west sea of Jeju appears relatively longer than east's. The longest wave period occurs at the west sea in winter, and in summer it appears relatively homogeneous with a little longer period at the south sea.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.11
• /
• pp.785-794
• /
• 2013

Combined sewer overflows during rainfall events contain sewer sediments and surface pollutants. This can cause significant chemical, physical and biological problems to receiving watershed. However, there are no method that can commonly apply to decide criteria for controlling the pollutant load. In this study, it sets up the reduction goals of combined sewer overflow through long-term simulation using the rainfall-runoff model. From a review of domestic and foreign management standard of combined sewer overflow for this, it makes decision that 60% (phase 1), 85% (phase 2) of total pollutant load and frequency per year for reduction goals is more proper. Also, the result of analyzing long-term simulation (minimum 10 years) applied to research basin indicates that reduction goals of BOD pollutant load are 1,123 kg (phase 1) and 2,374 kg (phase 2), and overflow volumes for research objective achievement are $11,685m^3$ (phase 1) and $24,701m^3$ (phase 2).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.6
• /
• pp.1-7
• /
• 2012

Due to the increasing demand of network convergence, in future, hybrid/integrated satellite and terrestrial systems will play an important role. In that case, compatibilities between the satellite and terrestrial systems are very important for efficiency of the systems. 3GPP Long Term Evolution (LTE) is one of the 4G system. Therefore, in this paper, we introduce the design of interleaver for mobile satellite system based 3GPP LTE specification. The 4G system including the LTE specification adopted adaptive modulation and coding (AMC) schemes for efficient usage of resources, and the updating interval of resource allocation is an order of msec. However, because of the long round trip delay of satellite systems, we cannot employ the same AMC scheme specified for the terrestrial system, and thus it cannot effectively counteract to short term fadings. Therefore, in order to overcome these problems, we propose an interleaver scheme combined with AMC. We present the interleaver design results considering mobile satellite system based on the LTE and analyze the simulation results.

• Journal of Korean Society of Forest Science
• /
• v.50 no.1
• /
• pp.29-35
• /
• 1980

The purpose of this study is to analyze and to forecast the long-term domestic demand and export demand for timber in Korea by regression models with time series data during 1962~1978. The method applied in this study was econometric analysis using Time Series Processor. The most important explanatory variables of timber demand were found to be the production activities of wood products industries to the prices of substitute goods. On the basis of the long-term forecast made according to the guidelines of the Fifth Five-Year Plan. According to the projection, domestic timber demand is projected at 8 million cubic meters in 1987 and 10.6 million cubic meters in 1991. On the other hand, the total demand (domestic demand plus export demand) for timber is projected 21.4 million cubic meters in 1987 and 27.2 million cubic meters in 1991.