• International Journal of Computer Science & Network Security
• /
• 제23권7호
• /
• pp.16-22
• /
• 2023

Enhanced radio access technologies (RAT) are deployed in Next Generation Convergence Networks by the service providers so as to satisfy the basic requirements of end-users for e.g. QoS. Whenever the available resources are being shared simultaneously and dynamically by multiple users or distribution of allocated channels randomly, the deficiency of spectral resources and dynamic behavior of Network traffic in real time Networking, we may have problem. In order to evaluate the performance of our proposed algorithm, computer simulation has been performed on NS-2 simulator and a comparison with the existing algorithms has been made.

• Journal of Positioning, Navigation, and Timing
• /
• 제13권2호
• /
• pp.137-147
• /
• 2024

This paper presents a novel Long Short-Term Memory (LSTM) network architecture for the integration of an Inertial Measurement Unit (IMU) and Global Navigation Satellite Systems (GNSS). The proposed algorithm consists of two independent LSTM networks and the LSTM networks are trained to predict attitudes and velocities from the sequence of IMU measurements and mechanization solutions. In this paper, three GNSS receivers are used to provide Real Time Kinematic (RTK) GNSS attitude and position information of a vehicle, and the information is used as a target output while training the network. The performance of the proposed method was evaluated with both experimental and simulation data using a lowcost IMU and three RTK-GNSS receivers. The test results showed that the proposed LSTM network could improve positioning accuracy by more than 90% compared to the position solutions obtained using a conventional Kalman filter based IMU/GNSS integration for more than 30 seconds of GNSS outages.

• Journal of Information Processing Systems
• /
• 제15권4호
• /
• pp.920-930
• /
• 2019

To figure out the impact of debt financing on the profits of industrial enterprises, it starts with calculating the first differences against the logarithms of the cost profit ratios and the debt asset ratios of Chinese industrial enterprises during 179 months from 2002 to 2016; next, it runs the cointegration test and afterwards the regression test to analyze the obtained first differences, and still next uses the Simulink software to get the regularity of those changes. It finds out that there is not only a long-term stable relationship between the enterprises' profits and debts, but also a steady time series trend within a short term. The profit rate positively correlates to the debt asset ratio, and profit for the current term positively correlates to the profit for the previous term. It indicates that properly raised debts can help increase the profit rate of the industrial enterprises, and a higher previous profit level can help improve the current profit level.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.539-542
• /
• 2005

We report how to establish the dynamic index for production control in a pilot fabrication over versatile and diverse production environments. We used dynamic index provided by a simulation model to monitor production performance. When production control is abnormal, the information system prompts administrators to classify these abnormal situations. In addition, the trend over the operation index is continuously reviewed in short-term and long-term. This simulation model is handy at setting goal for a versatile and diverse pilot production fab.

• Wind and Structures
• /
• 제22권5호
• /
• pp.525-541
• /
• 2016

An offshore wind turbine supported by a spar buoy floating platform is the subject of this study on tower and rotor extreme loads. The platform, with a 120-meter draft and assumed to be sited in 320 meters of water, supports a 5 MW wind turbine. A baseline model for this turbine developed at the National Renewable Energy Laboratory (NREL) is employed in stochastic response simulations. The support platform, along with the mooring system consisting of three catenary lines, chosen for loads modeling, is based on the "Hywind" floating wind turbine concept. Our interest lies in gaining an understanding of the dynamic coupling between the support platform motion and the turbine loads. We first investigate short-term response statistics using stochastic simulation for a range of different environmental wind and wave conditions. From this study, we identify a few "controlling" environmental conditions for which long-term turbine load statistics and probability distributions are established.

• 한국시뮬레이션학회논문지
• /
• 제12권3호
• /
• pp.69-81
• /
• 2003

To manage a cluster of distributed server systems, a number of management aspects should be considered in terms of configuration management, fault management, performance management, and user management. System performance monitoring and reporting take an important role for performance and fault management. In this paper, we present distributed system architecture modeling of a performance monitoring and reporting tool. Modeling architecture of four subsystems are introduced: node agent, data collection, performance management & report, and DB schema. The performance-related information collected from distributed servers are categorized into performance counters, event data for system status changes, service quality, and system configuration data. In order to analyze those performance information, we use a number of ways to evaluate data corelation. By using some results from a real site of a company and from simulation of artificial workload, we show the example of performance collection and analysis. Since our report tool detects system fault or node component failure and analyzes performances through resource usage and service quality, we are able to provide information for server load balancing, in short term view, and the cause of system faults and decision for system scale-out and scale-up, in long term view.

• 콘크리트학회논문집
• /
• 제26권3호
• /
• pp.343-350
• /
• 2014

이 연구에서 몬테카를로 시뮬레이션을 이용해 확률론적 시공단계해석을 수행한 이유는 재료 특성, 환경 요인 및 하중에 대한 불확실성의 영향을 고려하기 위해서이다. 지금까지의 연구에서는 크리프 및 건조수축이 완전히 독립적인 확률 변수라고 가정되었다. 그러나 크리프 및 건조수축 추정을 위한 재료모델의 공통적인 영향요인 때문에 크리프 및 건조수축 사이에 강한 상관관계를 추정 할 수 있다. 이 논문에서는 CEB-FIB모델의 크리프 및 건조수축식을 이용하여 몬테카를로 시뮬레이션을 수행하여 실제 두 현상 사이의 상관 계수를 평가 한 후 재료 특성, 환경 요인 및 하중의 확률 변수의 영향을 받는 축방향 변형의 통계적 특성을 평가하기위해 몬테카를로 시뮬레이션을 한번 더 사용하였다. 몬테카를로 시뮬레이션의 결과는 58층 건물의 첫 번째 층의 기둥의 변형률과 비교 했다. 비교 결과는 재료특성에 불확실성에 의한 변화가 가장 큰 것으로 나타났다. 측정된 변형률은 평균+표준 편차 범위 안에 있었다.

• 한국국방경영분석학회지
• /
• 제9권2호
• /
• pp.23-30
• /
• 1983

A simulation study was conducted to determine optimum capacity of Navy drydock facility using GASP-IV, an advanced FORTRAN-based simulation language, under demands of regular overhauls and emergency repairs by ships of an hypothetical fleet composition. Three year dock usage data was analyzed to produce probability distributions underlying drydock repair demands. The present facility size of two drydocks was simulated and was found to be somewhat short of adequate service capability, showing excessive average waiting time and average queue length. The simulation model was then modified to include an additional drydock of similar size as the other two and a year's simulation was again conducted. All repair needs were quite satisfactorily met and all docks showed very high utilization factor (0.98). This contributed to an increase in the fleet's ship availability from 0.95 to 0.99. This study illustrates the usefulness of simulation technique as a tool for analyzing policy alternatives in military long-term investment areas.

• 한국음향학회지
• /
• 제18권1호
• /
• pp.72-77
• /
• 1999

본 논문에서는 Wavelet 변환과 Vector Quantization(VQ)을 이용한 VBR (variable-bit-rate) 비디오 트래픽 모델을 제안하고 있다. 여기에서 제안된 방법은 영상 트래픽을 Wavelet 변환한 후 두 개의 요소로 분해하여 각각을 분리하여 모델링한다. 첫 번째 요소는 AR(1) 프로세스 모델로 이것은 트래픽의 비교적 장시간에 걸친 변화 특성을 표현한다. 두 번째 요소는 벡터 양자화(VQ)를 사용하여 비교적 짧은 시간의 트래픽 특성을 표현한다. 다른 VBR 트래픽의 모델 방법과 비교해서 본 논문에서 제안하는 모델은 세 가지 장점을 가지고 있다. 첫째로 영상 트래픽의 특성을 장시간과 단시간의 형태로 나누어 모델링을 할 수 있다. 둘째로 트래픽 데이터의 주기적 코딩 구조를 보존한다. 마지막으로 프레임 레벨과 슬라이스 레벨의 트래픽 모델링을 통합할 수 있다. 통계적 측정과 네트워크 성능 실험을 통하여 제안된 모델의 타당성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.74-76
• /
• 2002

The suspension insulators are subjected to harsh environment in service for a long time. Long term reliability of the insulators is required for both mechanical and electrical performances. We studied an analysing method to find out a deformation of brittle porcelain with a thermal expansion of cement for suspension insulator. These simulation analysis and experimental results show that cement volume growths affect severely to be mechanical failure ageing.