• Proceedings of the Korean Reliability Society Conference
• /
• 2006.05a
• /
• pp.93-100
• /
• 2006

The failure of hydraulic hose assemblies is caused by the impulse pressure and repetitive motions of bending and stretching (flexing) used at high pressure pipe in the form of bursting Since it takes long time to observe the bursting for life analysis, we can reduce test time by the method of applying the Knockdown stress which is equivalent to 70% of initial bursting pressure on rubber hose assemblies with maintaining the failure mode equally In this study, after scale parameter, shape parameter, and acceleration factor by preforming the impulse pressure test until the hose bursts, and finally analyzed the accelerated life.

• Asian Oncology Nursing
• /
• v.1 no.1
• /
• pp.5-17
• /
• 2001

It is known that aggressive treatment of chemotherapy, radiation and autogenous stem cell transplantation is effective for prevention of recurrence in the high-risk breast cancer patients. It was assumed that this procedure takes a longer time and decreases the quality of life more than the standard adjuvant chemotherapy. However, there are few studies comparing the quality of life of patients having bone marrow transplantation and adjuvant chemotherapy. Most of the studies were focused on the quality of life in one point of time, such as only during the early treatment stage, only overall quality of life rather than specific dimensions of the quality of life. The purposes of this study are 1) to identify the difference of the quality of life between two different treatment patterns, adjuvant chemotherapy and autogenous stem cell transplantation: 2) to identify the mostly affected dimension and the periods of time affected by the treatment patterns; and 3) to identify the trajectories of quality of life in each treatment pattern. This is a time series design that measures 4 different points of times. At the beginning of the study, 19 patients were placed in the chemotherapy group and 12 in the group of auto-peripheral blood stem cell transplantation. The inclusion criterion was the advanced disease stage of 3 or over with metastasis of more than 5 lymph nodes. The exclusion criteria were 1) anyone who has metastasis to other organ; 2) anyone who had psychological problems. Ferrell's Quality of Life Scale for Cancer Survivors 41 items on a 10 point scale was used. The QOL-CS includes 4 dimensions, which were labeled physical, psychological, social, and spiritual. The Cronbach‘s alpha of this scale was 0.89. Mann-Whitney U test and Friedman test were used to test each hypothesis. In comparison of the two groups, the quality of life of the bone marrow transplantation group dramatically increased at the 3rd and 6th month after transplantation, while the chemotherapy groups results stayed lower. The most affected dimension of the quality of life at the end of the treatment was the physical dimension. However, it and increased along with time, while the psychological dimension values remained low over the long-term period. Intensive nursing care is needed during the entire period of chemotherapy in all patients having chemotherapy, and is also required for right after cases of bone marrow transplantation.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.3
• /
• pp.219-227
• /
• 2020

It is expected that Korea will be entering with super aged society with its rapid changing to aging society compare to other developed countries. Such phenomenon is recognized from a long time ago and government has enacted Elderly Long Term Convalescence Insurance Regulation back in 1999. However, different from its actual purpose, there are many problems and improvements to be made, leading to legislative revision for several times. Still, it is left with many issues. This is one example showing there has been a continuous problem with elderly long term convalescence insurance system. Even this system in Germany which have started 4 years before us is to continuously revising regulation by raising issues to make strong structure for elderly welfare and long term convalescence, aiming to enhance life of elderly people by providing detailed standard for convalescence. Elderly related legal systematization may not enhance their welfare service or daily life right away. However, if details in regulation and its theory is systematically arranged, this will greatly reduce administrative confusion as well as increasing understanding and use of this system for the nation.

• 연구논문집
• /
• s.34
• /
• pp.79-85
• /
• 2004

There are several types of life test method for hose assemblies. The two major tests used for hose assemblies are impulse test and burst test. And magnification adjustment of impulse pressure, heating of testing oil and repetitive motions of bending and straightening of testing hose are also performed for accelerating the life. According to the manufacture process of hose and swaging process of fitting, there is a difference in the life of hose assemblies from minimum 7 times to maximum 40 times during the life test in the same functioning condition. Like this, the life test of hose which has a wide scope of life distribution gives a problem that observation should take a long time to find out the existence of the bursting from the beginning of the test to the completion of bursting of hose assemblies. Therefore, this research proposes a process of concentrating on the defective section of hose assemblies and maximizing the life acceleration by giving 'Knockdown stress' to hose assemblies just until before the hose assemblies get out of order.

• Environmental Analysis Health and Toxicology
• /
• v.21 no.3 s.54
• /
• pp.255-266
• /
• 2006

Soil organic matter (OM) is well documented for its capacity to retain persistent organic pollutants (POPs) and thus is important in dictating the environmental partitioning of POPs between media such as air, water, and soil. Black carbon (BC) is a small component of OM and exhibitt a 10$\sim$100 times greater sorption capacity of POPs than humified OM. Furthermore, due to the inherent long environmental life time of BC, a result of its resistance to physical and biological degradation, POPs can continue to accumulate in BC over a long period of time. The unique properties of BC have been of particular interest over the last 30 years and have resulted in broad research being conducted into its effects of POP cycling in atmospheric, oceanographic and soil matrices. The results of such studies have proved valuable In providing new research initiatives into the role of BC in the cycling of hydrophobic organic compounds (HOCs) as well as giving further insight into the long range atmospheric transport (LRAT) potential and subsequent risk assessment criteria for persistent organic pollutants (POPs). In this report, we introduce a novel study examining the relationships between BC and OM with respect to their POP sorption capacity and discuss the role of BC in influencing the environmental regulation of organic pollutants.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.9
• /
• pp.81-88
• /
• 2015

LED has been great attentions in lighting industry because of its long life-time, high efficiency, excellent light output characteristics. However, the life-time of the LED driving system is decreased because of the electrolytic capacitor which is used in the power conversion system for driving LED lighting. Therefore the capacitance reduction methods have been studied to replace an electrolytic capacitor with film or tantalum capacitor. This paper presents the Single stage PFC flyback converter with the simplified third harmonic current injection circuit to reduce output capacitance and the proposed system is theoretically analyzed and verified through the experiment.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.40-48
• /
• 1997

There are many research results as individual uni-axial tension creep test of heat-resisting materials. However, there are very few about the study on the high temperature creep test for the Initial Strain Method, and especially any study on it about the friction welded joints of SUH3 to SUH35. One of the important concerns is a reliable method of evaluating static creep properties. No reliable method seems available at present to evaluate or predict static creep properties. So, the reliable method to evaluate and predict them by the ISM and AE techniques was made.

• 한국데이터정보과학회:학술대회논문집
• /
• 2002.06a
• /
• pp.155-167
• /
• 2002

In this paper we consider optimal designs of partially constant-stress life testing which is deviced for three-component mixed systems with the considerably long time. Mixed systems are jointed serial system with parallel system. Test items are run at both use condition and accelerated condition until a specified censoring time. The optimal criterion for the sample-proportion allocated to accelerated condition is to minimized asymptotic variance of the maximum likelihood estimators of the acceleration factor and hazard rates.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1978-1980
• /
• 2000

Because the interfaces between two different materials are the weak-link in the underground power transmission systems, they affects the stability of insulation systems. In this paper, Epoxy/EPDM interface is selected and investigated the optimum condition by variation of interfacial conditions such as roughness of surface, spreading of oils, interfacial pressure and temperature. The breakdown times under the constant voltage below the breakdown voltage were also gamed. The breakdown voltage at the after laying time equivalent to is calculated by the V-t characteristic and the inverse power law. When this is done. the characteristic life exponent n is used and the long time breakdown voltage can be evaluated.

• Journal of Adhesion and Interface
• /
• v.21 no.1
• /
• pp.6-13
• /
• 2020

The objective of the current study is to characterize the long-term stability and efficacy of a structural adhesive assembly under static load. An apparatus was designed to be used in the Instron tensile test machine that would allow for real time modeling of the failure characteristics of an assembly utilizing a moisture- cure adhesive which was bonded to concrete. A regression model was developed that followed a linear - natural log function which was used to predict the expected life of the assembly. Evaluations at different curing times confirmed the structure was more robust with longer cure durations prior to loading. Finally, the results show that under the conditions the assembly was tested, there was only a small amount of inelastic creep and the regression models demonstrated the potential for a stable structure lasting several decades.