• 제목/요약/키워드: long-hole

검색결과 284건 처리시간 0.026초

Transplantation of Koelreuteria paniculata by Sea Current (모감주나무의 해류에 의한 전파)

  • 이영노
    • Journal of Plant Biology
    • /
    • 제1권1호
    • /
    • pp.11-20
    • /
    • 1958
  • I. Assumption: Mo-kam-ju, Koelreuteria paniculata is a woody plant mainly cistributed over Northern China. Its sporadic growth along the beaches of Korea and Japan is assumed to have been sowed by the seeds transported adrift on the current across the ocean. II. Use and Growth of the Plant: In China, this plant has been cultivated from early times mainly at temples, it seeds being used as rosaries, its flowers for yellow dyes and medicine for the eyes, and its leaves for black dyes. In Korea and Japan, these plants have been cultivated at temples and used as the material for rosaries. No natural growth of these plants was reported until 1919. III. Discoveries: In this domestic area, Dr. Chung Tae Hyun discovered the plant on the beach between Cho-Do and Chang-san-kot, Hwang-Hae Prov. in 1920. The reporter discovered them on the beach at Buk-Ni, Duk-jok-Do in 1948, at An-Hung in 1956 and on the beach at An-min-Do in 1957. In the Japan area, it was discovered for the first time twenty years ago, mainly along the coast line of the Japan Sea and some along the eastern coast line, at Subo, Yamaguchi Prefecture facing the Pacific Ocean. IV. Study and Experiment: A. Seed The seed coat is thick, non-permeable and floatable. A number of seeds were immersed in artificial sea water and fresh water separately. The seeds remained there for a hundred and forty-five (145) days from April 6, 1957 to August 29, 57. Thirty one seeds out of the fifty immersed in salt water and twenty seeds out of the fifty immersed in fresh water remained on the surface of the water, proving them to be non-permeable to both sea and fresh water. Of course, these had retained their germinating capabilities. Five (5) seeds out of twenty from the fresh water and six (6) out of thirty-one from the sea water were successfully germinated after a hole had been drilled in the seed coat and they had been planted. Thus their floating capability, non-permeability and germinating capability after a possible 145 day trip on the flowing currents has been proved satisfactory according to the assumption made above. B. Current As shown in the Data 2 and 3, the sea current initiated in the Pohai Sea flows westward down along the coast line of Korea reaching the southern part during the autumn and winter seasons. This fact also is in favor of the reporter's assumption. V. Discussion and Conclusion: The reporter concludes that, as discussed above, Koelreuteria paniculata which originates in Northern China is transported adrift on the flowing sea current to our western coast line, and also the coast lines of Shantung and Kuangtung of China and it is germinated on the sandy beaches forming new plants. Thus, the seeds drifted down on the southern beach of Korea and have been transported to the Japanese coast, adrift on the Tae-Ma current. Upon fruition, the seeds of the plants which settle on the coasts of western Korea and Japan will migrate to new places. It can be, however, assumed that while the thickness and nonpermeability of the coat enables the long travel in the water, this also can compose a difficulty in germination, consequently in developing a new distribution of this species.

  • PDF

Analysis of Siting Criteria of Overseas Geological Repository (II): Hydrogeology (국외 심지층 처분장 부지선정기준 분석 (II) : 수리지질)

  • Jung, Haeryong;Kim, Hyun-Joo;Cheong, Jae-Yeol;Lee, Eun Yong;Yoon, Jeong Hyoun
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • 제11권3호
    • /
    • pp.253-257
    • /
    • 2013
  • Geology, hydrogeology, and geochemistry are the main technical siting factors of a geological repository for spent nuclear fuels. This paper evaluated the siting criteria of overseas geological repository with related to hydrogeologic properties, such as hydraulic conductivity, partitioning coefficient, dispersion coefficient, boundary condition, and water age. Each country establishes the siting criteria based on its important geological backgrounds and information, and social environment. For example, Sweden and Finland that have decided a crystalline rock as a host rock of a geological repository show different siting criteria for hydraulic conductivity. In Sweden, it is preferable to avoid area where the hydraulic conductivity on a deposition hole scale (~30m) exceeds $10^{-8}m/s$, whereas Finland does not decide any criterion for the hydraulic conductivity because of limited data for it. In addition, partitioning coefficients should be less than 10-1 of average value in Swedish crystalline bedrock. However, the area where shows 100 times less than average partitioning coefficients of radionuclides in crystalline rock should be avoided in Sweden. In German, the partitioning coefficients for the majority of the long-term-relevant radionuclides should be greater than or equal to $0.001m^3/kg$. Therefore, it is strongly required to collect much and exact information for the hydrogeologic properties in order to set up the siting criteria.

Conservation of The Human Shaped Terra Cotta Mask Excavated from Jungcheon-ri, Jinju (진주 중천리 출토 인두형토기(人頭形土器)의 보존)

  • Lee, Hyunkyoung;Choi, Hyunwook;Lee, Seungli;Gwak, Hongin
    • Conservation Science in Museum
    • /
    • 제14권
    • /
    • pp.23-28
    • /
    • 2013
  • This paper aimed to show the whole conservation process of the human shaped terra cotta mask that was excavated from one of construction sites at Jungcheon-ri, Geumsan-myeon, Jinju. This mask was X-rayed to get the correct making techniques and there are 4 holes on the top of the head and each diameter of the 3 holes is exact and the other hole is different from the three. The long and sharp shape of the nose is in trapezoid which was separately made with clay and put on (the face). It's found that there are round grooves each around upper and down lips. (upper in length: 10mm, down in length: 6 mm). All restoring materials and adhesives used for restoration to associate each piece are reversibility materials. According to a few points on buried bones of animals distributed around the sites, holes and grooves on the top of the head, ears and teeth to wear something, it academically presumes that this mask could be possibly used for the group ritual. Especially, the whole procedure from excavation to scientific conservation process resulted to have a special exhibition to give the public new eyes how the exhibition realizes to the public.

The Construction Work Method of Mixed Coal Ash in Ash Pond to Recycle as a Horizontal Drain Material (수평배수재로 재활용하는 회사장 혼합석탄재의 시공 방안)

  • Koh, Yongil
    • Journal of the Korean GEO-environmental Society
    • /
    • 제14권4호
    • /
    • pp.53-58
    • /
    • 2013
  • The design for horizontal drain layer on soft ground starts from the decision that the material could be used or not, by verifying material condition in permeability of horizontal drain material according to the weight percent of the dry soil retained on #200 sieve. In the next step of the design, we estimate the thickness of horizontal drain layer to confirm trafficability of heavy machinery in construction work. Successively, the long-term functionality for good drainage of horizontal drain layer is checked and if needed, some means are considered. In this study, the system to recycle mixed coal ash in ash pond successfully as a horizontal drain material on soft ground is presented through the process and the result of its practical construction work. Namely, the pact is confirmed that mixed coal ash in ash pond should be sorted out by sieve screen to a certain extent and the remainders of this mixed coal ash on sieve openings be recycled, because the amount of finer particles than $75{\mu}m$ contained in mixed coal ash in ash pond is quite massive and irregular depending on the coal power plant or the location in same ash pond. In order to sort at large scale in situ, the dimension of a sieve squre hole and the sort-out method, etc. should be decided before the sort-out process. And, it is described that we need to manufacture classifier to sort out mixed coal ash in ash pond, too.

Effects of Respiratory Rehabilitation Training Using a Harmonica for Patients With Spinal Cord Injuries (하모니카를 활용한 호흡재활 훈련이 척수손상환자의 호흡기능에 미치는 영향)

  • Kim, Hyuk Gun;Kim, Min Seo;Lim, Han Mil;Joeng, So;Shin, Uk Ju
    • Journal of Music and Human Behavior
    • /
    • 제15권2호
    • /
    • pp.23-39
    • /
    • 2018
  • The purpose of this research was to investigate the effects of respiratory rehabilitation using a wind instrument for patients suffering from spinal cord injuries. From January 15, 2018 to April 15, 2018, we conducted ten 1-hour sessions of a harmonica program with eight patients with spinal cord injuries with average age of 37 years who could not perform abdominal breathing by themselves. We measured and compared patients' breathing capacity before and after the 10 sessions. Designed particularly for patients with spinal cord injuries resulting in a limited range of neck movement, the study used a 10-hole diatonic harmonica whose length was relatively short. For those patients who had difficulty using their hands, a harmonica holder was provided. Participants were trained to play simple tunes. They were guided to use abdominal breathing to make sounds, with emphasis on those parts requiring long and strong breathing. The results showed that for all eight patients both their breathing volume and their inspiratory volume increased following participation in the harmonica program. Also, the program had psychological benefits (e.g., more life satisfaction and less sadness) and additional physical benefits (e.g., less dizziness due to low blood pressure and better phlegm spitting). This study offers a unique way to help patients with spinal cord injuries to improve their breathing capacity, which may also be associated with a greater quality of life.

Evaluation of Mechanical Interactions Between Bentonite Buffer and Jointed Rock Using the Quasi-Static Resonant Column Test (유사정적 공진주 시험을 이용한 벤토나이트 완충재와 절리 암반의 역학적 상호작용 특성 평가)

  • Kim, Ji-Won;Kang, Seok-Jun;Kim, Jin-Seop;Cho, Gye-Chun
    • Tunnel and Underground Space
    • /
    • 제31권6호
    • /
    • pp.561-577
    • /
    • 2021
  • The compacted bentonite buffer in a geological repository for high-level radioactive waste disposal is saturated due to groundwater inflow. Saturation of the bentonite buffer results in bentonite swelling and bentonite penetration into the rock discontinuities present around the disposal hole. The penetrated bentonite is exposed to groundwater flow and can be eroded out of the repository, resulting in bentonite mass loss which can affect the physical integrity of the engineered barrier system. Hence, the evaluation of buffer-rock interactions and coupled behavior due to groundwater inflow and bentonite penetration is necessary to ensure long-term disposal safety. In this study, the effects of the bentonite penetration and swelling on the physical properties of jointed rock mass were evaluated using the quasi-static resonant column test. Jointed rock specimens with bentonite penetration were manufactured using Gyeongju bentonite and hollow cylindrical granite rock discs obtained from the KAERI underground research tunnel. The effects of vertical stress and saturation were assessed using the P-wave and S-wave velocities for intact rock, jointed rock and jointed rock with bentonite penetration specimens. The joint normal and joint shear stiffnesses of each joint condition were inferred from the wave velocity results assuming an equivalent continuum. The joint normal and joint shear stiffnesses obtained from this study can be used as input factors for future numerical analysis on the performance evaluation of geological waste disposal considering rock discontinuities.

Adaptability Test on Low Organic Soil and Selection of Varieties of Soybean Cultivars

  • Sung-Hyun Yun;Ju-young Choi;Young-Hwan Ju;Min-Young Park;Soo-Jeong Kwon ;Probir Kumar Mittra;Sang-Do Lee ;Tae-Young Hwang ;Sun-Hee Woo
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 한국작물학회 2022년도 추계학술대회
    • /
    • pp.78-78
    • /
    • 2022
  • Food productivity in North Korea is about 50% lower than in South Korea. In order to increase the productivity of major crops, it is necessary to develop early maturing, disease resistance, and high-yielding varieties and apply them early. Since the late 1990s, North Korea has been actively developing potatoes, rice and com as major food crops, and soybeans are considered important as a protein-supplying crop. Domestic cultivated varieties, which are expected to be most adaptable eco-climatologically, are mainly selected from soil with high nutrient soil. It is necessary to test separately for adaptability in low organic soil. So it is very necessary to apply technology to improve soil improvement through rotational crop selection in the middle and long-term. Therefore, this study was conducted to test the adaptability to low organic soils of domestic cultivars and to select varieties. In 2021 there are twenty two (22) varieties of soybeans were grown in low organic soil at the field of Chungbuk National University. This year twenty two (22) varieties of soybeans were also grown in low organic soil at the field of Chungbuk National University. Sowing was done on June 10, the planting distance was 70cm × 15cm, after opening the cotyledons fully, the soybeans were thinned and leaving two plants per hole. In addition, various types of growth characteristics and quantitative components were investigated to evaluate the adaptability to low organic soil of domestic varieties. This study was conducted to investigate the growth characteristics and quantitative components of soybean varieties grown in low organic soil. The flowering period of 22 varieties of soybeans was about 14 days from July 22 to August 4. The flowers of the beans were white, purple, light purple and the pubescence color was gray and brown where most of them were gray. The highest plant height was up to 130.4 cm and lowest was 20.3 cm, highest stem length was up to 119.5 cm and lowest was 15.3 cm. Highest first pod height (FPH) was up to 34.0 cm and lowest was 3.0 cm. Highest stem diameter was up to 15.76mm and lowest was 1.76 mm. Number of main stem nodes was up to 19 and at least 1. Number of branch was up to 10 and at least 0. The number of pod per plant was up to 121. Bacterial pustule has been spread in soybean field.

  • PDF

The Effect of Pressure and Hose Length on the Travelling Distance of Particles in Power Sprayer (토출압력(吐出壓力) 및 호오스길이가 도달성(到達性)에 미치는 영향(影響)에 관(關)한 연구(硏究))

  • Kwon, Soon Hong;Choi, Kyu Hong
    • Journal of Biosystems Engineering
    • /
    • 제7권2호
    • /
    • pp.30-35
    • /
    • 1983
  • To investigate the factors affecting the transportability of spray droplets, the maximum distance, the effective distance, the ratio of even distribution, and the diameters of particles were measured in accordance with the different pressure levels of power sprayer using 3 hole swath type nozzle, and the results are summerized as follows; 1. The distance of the most dense point from the nozzle was shortened by 0.5 meter with the 100-meter-long hose. The maximum reaching distances were reduced by 1.5 and 1.0 meters for the 13m/m and the 8.5 m/m hoses respectively, and the effective distance were reduced by 0.5 meter for both cases. 2. The effective distance can not be extended beyond 14 meters even if the length of hose is minimized at the rated pump pressure 28 kg/$cm^2$, it was 1 meter longer for 13m/m hose compared to the 8.5m/m one. 3. In case of 13m/m hose, the most dense point can be extended further by 0.5 meter increasing the pump pressure by 8 kg/$cm^2$, and the maximum distance and effective distance were increased by 2.0 and 0.5 meters respectively. There was no significant effect of pressure changes on the transportability in case of 8.5m/m hose. 4. Both the reduction of hose length and the increase of pump pressure influenced in large extent to the atomization effect of droplets. It was noticed that the diameter of droplet is related to the pump pressure and inside diameter of hose. 5. The pressure drop in 100-meter-long and l3m/m hose was 5~7kg/$cm^2$ at the pump pressure range of 25~33kg/$cm^2$, and it is an equivalent of 2% per 10 meter length of hose.

  • PDF

Experimental Study on the Characteristics of Combustion in the Indirect Moxibustion with Ginger (격강구(隔薑灸)의 연소(燃燒) 특성(特性)에 관한 실험적(實驗的) 연구(硏究))

  • Lee, Geon-mok;Lee, Geon-hui;Moon, Sung-jae;Hwang, Byung-chun;Guk, Uo-suk;Jang, Ji-yeon;Kim, Yang-jung;Jang, Jae-ho;Yun, Ju-young
    • Journal of Acupuncture Research
    • /
    • 제21권3호
    • /
    • pp.193-214
    • /
    • 2004
  • Objective : The purpose of this study is to investigate the mechanism and effect of moxibustion with ginger objectively, to be used as the quantitative data through the measurement of temperature, and to grasp the thermodynamic characteristics of moxibustion with ginger. Methods : We have selected the indirect moxibustion with ginger among many indirect moxibustions. We produced a slice of ginger to a thickness of 3, 4, 5mm and the moxa cone having a diameter of 8mm, a height of 10mm for making a comparative study of characteristics of moxa cone according to change the density. We have made a comparative study of the thermodynamic characteristics of moxibustion with ginger with or without holes. We measured combustion times and calculated temperatures, temperature gradients in each period during a combustion of moxa. Results : 1. We found out it was not significantly influenced by the existence of the punched holes in a slice of ginger because the punched holes grow smaller immediately. 2. The duration of the preheating period became longer according to thickness of a slice of ginger and was not directly proportional to the density of moxa cone. The duration of the preheating period was extremely short when it burned a 100mg moxa cone. That was influenced by the density of moxa cone. 3. The duration of the heating period became longer according to thickness of a slice of ginger likewise the preheating period bacause the density of moxa cone had effected on the combustion characteristics. The duration of the heating period was extremely long when it burned a 100mg moxa cone. On the other hand the maximum temperature in the heating period was appeared that the combustion with a thin slice of ginger was highest and measured that the large density of moxa cone was higher. But the maximum temperature in the heating period was about $37.8^{\circ}C{\sim}44.2^{\circ}C$respectively lower in others. 4. The duration of the retaining period was some doubling shorter than that of the heating period that is concerned the shape of moxa cone. The temperature measured the close of a retaining period was $36.6^{\circ}C{\sim}41.8^{\circ}C$, that was considerably lower temperature. 5. The mean ascending temperature velocity and the mean descending temperature velocity were $0.042{\sim}0.073^{\circ}C/sec$, $-0.027{\sim}-0.064^{\circ}C/sec$ respectively. Then, the ascending temperature velocity was some faster than the ascending temperature velocity. Conclusions : The quantitative standard for obtaining the effective heating stimulation is that if the slice of ginger made a hole in it, we had to use the needle above 1.5mm diameter. The recommended size of a slice ginger is the 14mm diameter and the 2~3mm thickness. The moxa cone is formed the conical shape that the base diameter was 8mm, the height was 10mm, the density was $600mg/cm^2$.

  • PDF

Arthroscopic Transosseous Suture Repair for Bankart Lesion with a Flexible Drill Device - An Experimental and Preliminary Clinical Report - (유연성 천공기를 이용한 Bankart 병변의 골관통식 봉합 - 동물 실험 및 예비 임상 결과 보고 -)

  • Park, Jin-Su;Won, Ye-Yeon;Yoo, Jung-Han;Park, Yong-Wook;Noh, Kyu-Chul;Chung, Kuk-Jin;Kim, Hong-Kyun;Hwang, Ji-Hyo;Lee, Young-Bum;Suh, Il-Woo
    • Clinics in Shoulder and Elbow
    • /
    • 제13권1호
    • /
    • pp.72-78
    • /
    • 2010
  • Purpose: Too develop a flexible drill device that can be inserted into the shoulder joint so that arthroscopic transosseous suture repair for Bankart lesion is possible. Materials and Methods: We created a device composed of a flexible drill unit and a guide pipe unit. The flexible drill unit was made of flexible multifilament wires (1.2 mm in diameter) that was twisted into one cord so that it can flex in any direction and a drill bit (1.2 mm in diameter) that is attached onto one end of the flexible wire. The guide pipe unit was a 150 mm long metal pipe (2.0 mm in inner diameter and 3.0 mm in outer diameter), with one end bent to 30 degrees. The flexible drill set was inserted into the shoulder joint through the posterior portal of the joint. The guide pipe component was placed onto the medial wall of the glenoid so that the pipe was placed 5 mm posterior to the margin of the anterior glenoid rim. The flexible drill was driven through the glenoid by the power drill so that holes were made in the glenoid. A non- absorbable suture was passed through the hole. Tying of a sliding knot tying was accomplished over the capsule and labrum after making a stitch through the capsule and labrum with a suture hook loaded with suture passer. The same procedures were done at the 2 and 4 O'Clock positions of the glenoid. Results: Five cases with Bankart lesion received arthroscopic transosseous repair with our flexible drill device. There were no intraoperative problems. Neither redislocation nor subluxation was reported at final follow-up. Conclusion: Arthroscopic transosseous suture repair without suture anchors and easy tying of a sliding knot are possible with a flexible drill set.