• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4A
• /
• pp.307-313
• /
• 2009

In this study, in order to research the repair-strengthening methods, when fatigue crack occurs in the coped stringers of a steel railway bridge, we manufacture the full size of crossbeam-stringer and floor system model. Also the experimental test is performed on the coped stringers applying the repair-strengthening methods using the stop hole, combination plate, connection plate, bracket, and so on. The results indicate that, the most effective method is to set up connection plate and bracket in the top flange and bottom flange of the stringers, while we can consider the method of punching stop holes in the end of the crack as a subsidiary method. It is necessary to set up the combination plate when the length of crack is quite long.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.1
• /
• pp.65-72
• /
• 2008

The purpose of the HLW deep geological disposal is to isolate and to delay the radioactive material release to human beings and the environment for a long time so that the toxicity does not affect to the environment. The main requirements for the HLW repository design is to keep the buffer temperature below $100\;^{\circ}C$ in order to maintain its integrity. So the cooling time of spent fuels discharged from the nuclear power plant is the key consideration factors for efficiency and economic feasibility of the repository. The disposal tunnel/disposal hole spacing, the disposal area and thermal capacity required for the deep geological repository layout which satisfies the temperature requirement of the disposal system is analyzed to set the optimized spent fuels cooling time. To do this, based on the reference disposal concept, thermal stability analyses of the disposal system have been performed and the derived results have been compared by setting the spent fuels cooling time and the disposal tunnel/disposal hole spacing in various ways. From these results, desirable spent fuels cooling time in view of disposal area is derived. The results shows that the time reaching the maximum temperature within the design limit of the temperature in the disposal site is likely shortened as the cooling time of spent fuels becomes short. Also it seems that the temperature-rising and-dropping patterns in the disposal site are of smoothly varying form as the cooling time of spent fuels becomes long. In addition, it is revealed that a desirable cooling time of spent fuels is approximately 40-50 years when spent fuels are supposedly disposed in the deep geological disposal site with its structural scale under consideration in this study.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.1
• /
• pp.53-61
• /
• 2012

In this study, the research on MC anchor has been developed as composite type has done. MC anchor exerts bearing pressure on pre-bored hole where the end fixing device is expanded. Therefore, the uplift capacity is to be increased and it has the characteristics that the anchor body is not eliminated from the ground even if the grouting is not carried out properly. Furthermore, it reduces the loss of tension and raises the construction availability by inserting the reinforced bar as well as the anchor cable, while it can improve the long-term stability because the nail is expected to play the role when the loss of the anchor cable is occurred in a long-term. However, because the resistance mechanism of the compound anchor such as MC anchor is different from friction anchor, the estimation method of the uplift capacity by the frictional force of the ground and the grout is not proper. Particularly, in domestic cases, the problem to overestimate or underestimate the uplift capacity is expected because the design method considering the soil characteristics about the compound anchor has not been developed. Therefore, in this study, in order to evaluate the characteristics of MC anchor and a kind of compound anchor, we measured the uplift, the tension and the creep by nine anchors tests in shale ground that the fluctuation of the strength is great. In addition, we analyzed the test result comparing to the result of the general friction anchor and evaluated the characteristics of MC anchor movement to gather the results. As a result of the test, we found the effect that the uplift capacity is increased in shale ground comparing to the general friction anchor.

• Journal of Science of Art and Design
• /
• v.6
• /
• pp.140-202
• /
• 2004

Body means 1)the whole structure and substance of a man, animal, or plant 2) the trunk or torso of a man or animal 3) part of garment that covers the trunk 4) the fresh or material substance, as opposed to the spirit. Human body could be distinguished as fresh and spirit. Body has the meaning of physicality. Physical means the bodily and constitution, but in the meaning of constitution there is the content of spirituality. Physicality means the appearing or arising of trace or image or nuance of body. The paintings which are using bodies are 1) directly draw bodies 2) twisting or transformation or nuance of the body and highly upgrade the physical emotion or fantastic bodily nuance 3) directly rubbing artist's body on the surface of painting with pigments to elect tactile specification. These physical art have appeared broadly by various artists, mainly with the social aspects of sex, drug, psycho sexual issues. In case of Joel peter Whitkin, the reason of strong physicality in the art is from the mind of the rejection and resistance of real world which is targeting top, perfect and beauty. Further explanation, being the world which is separated top and under, men and women, beauty and ugly; further in the situation, the hierarchy, terror and pressure began and many difficult problems has derived. The contents of attacking feminists's art works are very obscene to reveal female and male's phallus strongly. Sometime, it is strongly related in the political issues. The physical paintings have strong meanings in the action by hands and feet. It supports that it could reveal the humanity with smell, breath, and traces of bodies. In the bodies, the origin of life begins which gives human life by blood lines and water. Sometime, the physical paintings are made by the blood and urine to stick the physicality for special nuance. The physical paintings are made by the image of penis and clitoris which are related in the image of urinating, ejaculation and sometime is symbolized as pens and candles to drop liquid. The selected painters who are related in physical painting are Jackson Pollock, Andrea Serano, Eve Klein, Francis Bacon, Francesco Clemente, Lichard Long, Jakes & Dinos Chapman, Anselm Kiefer, Kiki Smith and Park, Ki Woong. Francis Bacon's style is destructive in representing human shapes which give us special message about the unbearable activity of men politician, high brain, wealthy and religious people. Francesco Clemente's method is to use throat, ear hole, mouse, clitoris, belly nostrils and every holes of body to transmute human physical body. Lichard Long uses directly his body in drawing the surface of painting by using liquid of mud Jakes & Dinos Chapman destroys or transforms the bodies of human. It sometime appears wrong location of the bodies that the penis and vulva is in between human faces or nose of women, Anselm Kiefer uses human hair for representing the human decaying martyrs, and indirectly using straw, he gives special ritual action to repent the Nazi's fault. From 2002 to 2003, Park KI Woong used women womb images to intermingle the smoke shape of <9.11 terror, 2001> in New York to reveal the painful situation of the time(*).

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.8 no.1
• /
• pp.19-25
• /
• 2009

Purpose: We report mid to long - term results of meniscal transplantation and evaluate the important factors for successful outcomes. Materials and Methods: Between December 1999 and September 2002, 25 meniscal transplantations were performed using fresh frozen allograft. The lateral meniscus was transplanted in 19 cases and medial meniscus in 6 cases. The mean age was 34 years (range, 17~50 years) and the mean follow up was 54.8 months (range, 6~85 months). Preoperative measurements were made using a ruler graded in millimeters. Lateral meniscus was fixed by keyhole technique and medial meniscus was fixed by double bone plug technique with suturing the periphery of the meniscal transplant. All patients were evaluated with Knee Assessment Scoring System (KASS), Lysholm knee score, and Tegner activity scale for daily activity. Results: Symptoms improved in all cases. The average KASS score increased from 61.7 preoperatively to 83.8 postoperatively. The average Lysholm knee score increased from 77.7 preoperatively to 87.7 postoperatively (excellent in 3 cases, good in 17 cases, fair 4 cases, poor 1 case). But painful swellings were 3 cases, numbness in 1 case, and granuloma due to non-absorbable suture material in 1 case. Peroneal nerve palsy in 1 case was recovered after 6 weeks postoperatively. Conclusion: Meniscal allograft transplantation after subtotal or total menisectomy can significantly relieve pain and improve function of the knee joint. The exact preoperative sizing and secure fixation are essential for successful outcomes.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.4
• /
• pp.229-236
• /
• 2009

There are two types of spent fuels generated from nuclear power plants, CANDU type and PWR type. PWR spent fuels which include a lot of reusable material can be considered to be recycled. CANDU spent fuels are considered to directly disposed in deep geological formation, since they have little reusable material. In this study, based on the Korean Reference spent fuel disposal System(KRS) which is to dispose both PWR and CANDU spent fuels, the more effective CANDU spent fuel disposal systems have been developed. To do this, the disposal canister has been modified to hold the storage basket which can load 60 spent fuel bundles. From these modified disposal canisters, the disposal systems to meet the thermal requirement for which the temperature of the buffer materials should not be over $100^{\circ}C$ have been proposed. These new disposals have made it possible to introduce the concept of long tenn storage and retrievabililty and that of the two-layered disposal canister emplacement in one disposal hole. These disposal concepts have been compared and analyzed with the KRS CANDU spent fuel disposal system in terms of disposal effectiveness. New CANDU spent fuel disposal concepts obtained in this study seem to improve thermal effectiveness, U-density, disposal area, excavation volume, and closure material volume up to 30 - 40 %.

• Korean journal of applied entomology
• /
• v.9 no.2
• /
• pp.85-90
• /
• 1970

This study was conducted to find out the evidence of a sex attraction in the fall webworm moths, Hyphantria cunea D., in the fold conditions. The study dealt with the sex attraction between the sexes, selection of effective trap type, effect of moth age on the sex attractiveness, sex attractiveness after copulation, and the time of the sex attraction in the day, The trap was baited with a living moth in the cylindrical screened case 4cm. in long and 2.7cm in diameter. The traps were attached on the tree in a horizontal position at the height of about 3m. on the ground. A sex pheromone was evident in the female moth which attracted the male to the lure, and the modified sticky trap was most effective in this experiment. The trap consisted of a cylindrical powder milk can 11.5cm. in long and 10cm. in diameter with the entry hole 4.8cm, in diameter at both ends of the can, and the inside of can was lined with paper coated with acri-soil(sodium poliacrilate) to catch them. Males were mostly attracted to females during their first 2 days of life, and its attractiveness decreased with moth age, No males were attracted to females more than five days old, and no females lived for more than six days. After copulation, sexual attractiveness was decreased swiftly, Sexual attractiveness was found to be greatest between 4 and 6 A.M. Living females can be used as effective baits for luring the males to the fold trapt.

• Korean Journal of Pharmacognosy
• /
• v.48 no.4
• /
• pp.329-338
• /
• 2017

This study was investigated the changes of quality stability and physicochemical characteristics of the Korean red ginsengs stored for a long times over 20 years. The Korean red ginsengs were stored for 4 to 22 years in canned packaging with polypropylene film and wooden box at room temperatures. The unusal phenomena such as discoloration and pin hole in packaging were not observed. General bacteria showed the vlaues of below 100 CFU/g, coliform groups and molds were not found in any samples stored for 22 year. Any samples also were not detected in mycotoxins. The contents of moisture, ash and crude saponin were the levels of 10.6~11.1%, 3.8~4.2% and 4.1~4.7% during the whole storage periods, respectively. The contents of maltol, which has been known as characteristic flavour and antioxidant of Korean red ginseng, showed remarkably increasing tendency from 0.10 mg/g for 4 years to 2.53 mg/g for 22 years during the storage. The contents of AFG (arginyl-fructosyl-glucose), arginine and free sugar were slightly decreased. Acidic polysaccharide and ginsenoside were not changed significantly during the storage periods. The contents of acidic polysaccharide and total ginsenosides were the 75.1~76.3 mg/g and 15.1~16.6 mg/g, respectively. The sums of ginsenoside-Rg1,-Rb1 and -Rg3s were the ranges of 9.3~9.9 mg/g and PD (ginsenoside-Rb1, -Rb2,-Rc,-Rd,-Rg3s,-Rg3r)/PT (ginsenoside-Rg1,-Rg2,-Re,-Rf,-Rh1) saponin ratios were the levels of 1.4~1.5. These results suggest that Korean red ginsengs stored for long periods show relatively stable quaility stabilities and not significantly changed the contents of ginsenoside and polysaccharide during the storage up to 22 years.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2674-2685
• /
• 1997

In this paper, the design and imprlementation of dual-band power amplifier which is used as a critical part for mobile phone to be simultaneously working at a dual band, 800MHz CDAM and PCS frequency band is described. DC operating point of power FET is limited to Class-B to enable long talk time considering that the tyupical power range of CDMA phones in working is around 10 to Class-B to enable long talk time considering that the typical power range of CDMA phones in working is around 10 to 15dBm, i.e., liner range. The power amplifier which employs two GaAs FETs with good linerity at a low operating point has duplexer cuplexer circuit to separate two frequency bands at input and output stage. Electromagnetic analysis for via holes and coupling between narrow transmission lines is included to design a circuit. Moduld size of 0.96CC($22{\times}14.5{\times}3mm^3$) and maximum module current of 130mA at output power range, 10 to 15dBm are attained. The power amplifer module has achieved ACPR performance with 2 to 3dB marging from IS-95 requirement at output powers, 23.5dBm for PCS and 28dBm for 800MHz CDMA respectively.

• Explosives and Blasting
• /
• v.39 no.3
• /
• pp.15-23
• /
• 2021

Ventilation shafts are pathways in mines and tunnels for the removal of dust or smoke during underground space construction and operation. In mines, blasting with long blast holes is preferred for the excavation of a ventilation shaft in the 10~20m long crown pillar section. In this case, the bottom part of the blast hole is completely drilled in order to determine the drilling error, and this causes a problem of lowering the explosive charge and blasting efficiency. It is possible to solve the problem of explosive loading and to increase the blast efficiency by covering the curb of the blasthole by using stemming material. In this study, simulations for the blasting of a ventilation shaft were performed with various stemming lengths and the blasthole diameters(45, 76mm) using AUTODYN 2D SPH(Smooth particle hydrodynamics) analysis technique. Also the optimal bottom stemming column was derived by checking the size of the boulder and burden line according to blasting. Analysis result, blasting efficiency is lessened in case of stemming length less than 30cm and the optimal length of the stemming material should be 30cm or higher to achieve high efficiency of blasting.